Abstract:Electrochemically active zinc blende anodic materials have been envisioned to host Li+ ions at tetrahedrally configured interstitial sites, resulting in minimum volumetric expansion. Despite the silicon carbide (β-SiC) being a zinc blende system with a high theoretical specific capacity (∼1430 mAh/g) and structural robustness, it has not been studied to the extent that its other peers like Si/graphite/Sn/Al, etc. have been. By identifying and addressing the issues that currently limit commercially available β-SiC’s practically achivable storage ability, we can unlock its potential as a viable anodic material for Li+-ion battery (LIB). In this work, comprehensive structural studies on commercially procured different batches of β-SiC unveil the presence of a native suboxide passivation layer. This suboxide layer adversely affects the Li+-ions diffusion kinetics besides poor initial Coulombic efficiency and inferior reversible capacity (∼79 mAh/g @ 128th cycle). The removal of this suboxide passivation layer immediately brings a 5-fold increase in Li+-ions diffusion kinetics and an ∼53% increase in the first reversible specific capacity. The study shows the need for further assistance to increase the Li+-ions diffusion, and the surface modification by N-doped carbon is found to be competent enough to bring an ∼35-fold increase in overall lithium diffusion kinetics. This results in a noticeable increase in reversible specific capacity by more than an order of magnitude from ∼79 to ∼930 mAh/g. The modified SiC-based anodes are found to be compatible when paired with commercially available LiCoO2 in full-cells. The LiCoO2//SiC-based full cell demonstrates the capacity retention of nearly 80% post 175 cycles and is well capable of powering prototype portable electronic devices, too. The overall study suggests that commercially available silicon carbide materials are worthy of consideration as negative electrodes in LIB upon deliberate surface engineering and should be given a chance.

Zinc oxide and germanium dioxide adsorbed on silicon nanocage as anodes in lithium-ion battery and potassium-ion battery

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

ZnFe2O4-nanocrystal-assembled Microcages As an Anode Material for High Performance Lithium-Ion Batteries

SiGe Porous Nanorod Arrays As High-Performance Anode Materials for Lithium-Ion Batteries

Regulating Anode‐electrolyte Interphasial Reactions by Zwitterionic Binder Chemistry in Lithium‐ion Batteries with High‐nickel Layered Oxide Cathodes and Silicon‐Graphite Anodes

Confronting the Issues Associated with the Practical Implementation of Zinc Blende-type SiC Anodes for Efficient and Reversible Storage of Lithium Ions

Interface engineering on cobalt selenide composites enables superior Alkali-Ion storage

Adapting Simultaneous in Operando Electrochemical Quartz Crystal Microbalance (EQCM) and Electrochemical Impedance Spectroscopy (EIS) to Studies of SEI Layer Formation on Amorphous Silicon Anodes

Silicon and Carbon Nanocomposite Spheres with Enhanced Electrochemical Performance for Full Cell Lithium Ion Batteries

Nanocages (Si72, Cl-Si72, Br-Si72, C72, Cl-C72, Br-C72, B36P36, Cl-B36P36, Br-B36P36) as Anodes in Mg-ion Battery and Na-ion Battery

Multi-strategy Synergistic In-Situ Constructed Gel Electrolyte-Binder System for High-Performance Lithium-Ion Batteries with Si-based Anode

Silicon Anodes Protected by A Nitrogen-Doped Porous Carbon Shell for High-Performance Lithium-Ion Batteries

Composites of Piezoelectric Materials and Silicon as Anodes for Lithium-Ion Batteries

3D Ordered Porous Hybrid of ZnSe/ N ‐doped Carbon with Anomalously High Na + Mobility and Ultrathin Solid Electrolyte Interphase for Sodium‐Ion Batteries

Saclike-silicon nanoparticles anchored in ZIF-8 derived spongy matrix as high-performance anode for lithium-ion batteries

Potential of Silicon and Carbon Nanocages (C38, F-C38, Cl-C38, Si38, F-Si38, Cl-Si38) as Anode Materials in Li-ion Battery and Mg-ion Battery

Exploring the Potential of Carbonized Nano-Si within G@C@Si Anodes for Lithium-Ion Rechargeable Batteries

Fabrication of a Stable and Highly Effective Anode Material for Li-Ion/Na-Ion Batteries Utilizing ZIF-12

Aluminum Nitride, Silicon and Carbon Nanocages as Anode Materials in Metal-Ion Battery

Interfacial engineering of polyhedral carbon@hollowed carbon@SiO2 nanobox with tunable structure for enhanced lithium ion battery

Monodisperse Porous Silicon Spheres as Anode Materials for Lithium Ion Batteries