Abstract:Although the weight ratio of electron conductive additives and the binder to porous carbons in the electrode component of electric double-layer capacitors (EDLC) is minimal, however, without them the electrochemical performances of EDLC would decay quickly. In this work, we present a one-step approach for manufacturing a unique conductive carbon material that shows highly connecting hollow structures as well as approximate oxygenated surface groups to create a synergy effect with aqueous binder and the main component, porous carbon. The as-prepared carbon nanospheres (HCNs) were generated from a typical carbon black-PC20 in air (denoted as PC20HT) at mild temperatures ranging from 400 to 700°C for 2-4 h at a massive scale of approximate 1 kg h −1 . The as-prepared PC20HT displays a high specific surface area of 657 m 2 g −1 (the pristine PC20 has 112 m 2 g −1 ) with a pore volume of 0.71 cm 3 g −1 , and an oxygen content of 14.10 wt%. Interestingly, a premixing of PC20HT and porous carbon is required before making the electrode pastes. The well-premixed carbon materials and a water-soluble binder-polyacrylic acid are composed into highly-stable components as EDLC electrodes in an organic electrolyte. As consequently, the PC20HT-assisted electrodes demonstrate highly stable life cycles (charge-discharge behaviors), with a retention rate 82.13 % over 50,000 cycles at a narrow voltage window of 2.5-2.7 V at 0.5 A g −1 when compared to two conventional conductive carbons, BP2000 (68.45 %) and Super P (67.46%). Thermal annealing at 900 °C in Ar reduces the oxygen content of PC20HT to 4.25 wt% (referred to as TPC20HT), increasing the retention rate of life cycle to 88.89 % after the same cycles. TPC20HT-assisted EDLC electrodes exhibit a superior energy density of 34.76 Wh kg −1 , which is higher than CB-BP2000 and Super P-assisted EDLC electrodes. The transforming of structural morphologies as well as the surface oxygenated and graphitic structures of the as-prepared HCS, PC20HT, and TPC20HT were also described before and after long-term cycling. This simple route for producing conductive carbons is applicable in an aqueous binder system for preparing EDLC electrodes with a cost-effective and environmentally friendly approach.

Achieving high volumetric EDLC carbons via hydrothermal carbonization and cyclic activation

Understanding pore size relation in cellulose-derived, nitrogen-doped, hydrothermal carbons for improved supercapacitor performance

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

Microporous carbons finely-tuned by cyclic high-pressure low-temperature oxidation and their use in electrochemical capacitors

High surface area porous carbon derived from chitosan: CH3COOH/(NH4)2HPO4 dual-assisted hydrothermal carbonization synthesis and its application in supercapacitor

Preparation of carbon materials for supercapacitors in energy storage by direct hydrothermal carbonization of cellulose and pyrazine

Ultrafast pore-tailoring of dense microporous carbon for high volumetric performance supercapacitors in organic electrolyte

Nature-inspired Self-Activation Method for the Controllable Synthesis of Highly Porous Carbons for High-Performance Supercapacitors

N-rich and O-poor doped carbon prepared via facile ammonium nitrate assisted hydrothermal carbonization for robust supercapacitors

Self-activation of Cellulose: A New Preparation Methodology for Activated Carbon Electrodes in Electrochemical Capacitors

A novel strategy to synthesize hierarchical, porous carbohydrate-derived carbon with tunable properties.

An Ultra-microporous Carbon Material Boosting Integrated Capacitance for Cellulose-Based Supercapacitors

Facile Preparation of Porous Carbons Derived from Orange Peel Via Basic Copper Carbonate Activation for Supercapacitors

Oxidative Foaming Plus In-Situ Activation and Template Synthesis of Hierarchical Porous Carbon for High-Performance Supercapacitors

One-step generation of hollow graphitic carbon nanospheres with suitable oxygenated structures as conductive additives for water-soluble binder in highly stable supercapacitor electrodes

Ultrafast Porous Carbon Activation Promises High‐Energy Density Supercapacitors

Fabricating N, P-Codoped Hierarchical Porous Carbons from Lignin via Assembled Templating and Activation Strategy for High-Performance Supercapacitors

Ion Intercalation into Graphitic Carbon with a Low Surface Area for High Energy Density Supercapacitors

Three-dimensional hierarchical porous carbon derived from lignin for supercapacitors: Insight into the hydrothermal carbonization and activation

Graphitic porous carbon with multiple structural merits for high-performance organic supercapacitor