Full-scale aerobic granular sludge for municipal wastewater treatment – granule formation, microbial succession, and process performance
Jennifer Ekholm,Frank Persson,Mark de Blois,Oskar Modin,Mario Pronk,Carolina Suarez,David J. I. Gustavsson,Mark van Loosdrecht,Britt-Marie Wilen
DOI: https://doi.org/10.1039/d2ew00653g
2022-11-06
Environmental Science: Water Research and Technology
Abstract:Aerobic granular sludge (AGS) plants have gained growing interest and application due to their low energy demand, small footprint, and low operational costs. However, the fulfilment of strict discharge limits for nitrogen and phosphorus, vast seasonal temperature variations, and large peaks in influent flows may pose challenges to the implementation of AGS. Moreover, knowledge about the microbial community assembly and process performance under varying environmental conditions in full-scale reactors is still limited. In two full-scale AGS reactors, the start-up was associated with rapid changes in microbial community composition. One reactor was reseeded with biomass from the other, due to unsuccessful granulation. This resulted in a convergence of the microbial communities in the two reactors with the maintenance of stable sludge concentrations (6-8 g/L) with large granules (50-80% with diameter >2 mm) and fast settling of biomass (SVI30/SVI10 of 0.9-1). Mass flow immigration from the influent wastewater was a minor factor affecting the microbial community once the granules had formed, while the seasonal variations in environmental factors were identified as important. Key guilds of AOB (Nitrosomonas), NOB (mainly Ca. Nitrotoga), PAOs (mainly Tetrasphaera), and GAOs (mainly Competibacter) varied considerably in abundance throughout the study period. After 15 months, stable organic matter, nitrogen, and phosphorus removal were attained with low effluent concentrations. During the start-up, the BOD7/N ratio, influent flow, and temperature were important factors influencing the performance of the AGS.
English Else