Abstract:Beam -to -column joints in seismic moment frames would directly influence the behaviours of the connected members. When reinforced joint configurations were adopted to shift plastic hinges away from the field welds, columns in seismic steel frames would suffer larger inner forces and should be specially checked to control yielding mechanics. However, there were only few investigations on reinforced joints with typically -designed columns in multi -story frames, which limited the comprehensive evaluation of seismic beam -to -column joints especially for the reinforced joint configurations. In this investigation, the seismic behaviours of the cover -plate joint and the flange -plate joint, which are collectively referred to as plate -reinforced joints, were evaluated experimentally. Tests of four double -sided plate -reinforced joint specimens, taken from prototype seismic steel frames that were typically designed and checked by the Chinese code, were conducted under anti -symmetrical cyclic loads on the beam ends with axial forces in the columns. The test results were analysed to consider the seismic performances of the connections and members in the plate -reinforced joints, summarizing the char- acteristics of the failure modes, the resistance and the ductility. Specially, the seismic behaviour of the middle column with axial force, as well as the panel zone, was analysed. According to the test results, the flange -plate joints were more sensitive to the quality of the field complete -joint -penetration welds between the reinforcing plates and the column flanges than the cover -plate joints. The middle columns in typically -designed seismic frames by the Chinese code may not guarantee satisfactory seismic performances in the joint regions, and the panel zone that was designed based on the Chinese code might not allow the beam section to reach the plastic moment although it could effectively contribute to the joint deformability. Based on this study, practical re- commendations for seismic design of connections and members in plate -reinforced joints were proposed.

Research on seismic design method of a beam-column joint in reinforced concrete space frame

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Seismic Behavior of Buckling Restrained Braced Composite Frames

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

Analytical Study On Buckling Restrained Braced Composite Frames

Seismic Performance Analysis of RC Frame Structure Beam–Column Joints Based on Strong Column and Weak Beam Method

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

A Beam–column Joint Element for Analysis of Reinforced Concrete Frame Structures

Numerical analysis on seismic behavior of beam-column joint with different cement-based materials

Experimental study on seismic behavior of prefabricated RC frame joints with T-shaped columns

Seismic performance of full-scale self-centering reinforced concrete beam-column joints: Experimental, numerical and theoretical analysis

Seismic behavior of RCS frame joints applied with high-strength bolts-end plate connection

Experimental Study on Typically Designed Double -Sided Plate -Reinforced Joints with Middle Columns

Seismic Performance of Full-Scale Joints Composed by Concrete-Filled Steel Tube Column and Reinforced Concrete Beam with Steel Plate-Stud Connections

Investigation on Shear Capacity of Joints between Steel Reinforced Concrete Special-Shaped Column and Reinforced Concrete Beam

Research on Shear Capacity of Concrete-Filled Square Steel Tubular Column to Unequal Height Steel Beam Joint with External Diaphragm

An experimental study on the seismic performance of beam-column joints in steel frames with the effect of concrete slabs considered

Seismic Performance of Large-Scale RC Eccentric Corner Beam-Column-Slab Joints Strengthened with CFRP Systems

Experimental and Numerical Investigations on Seismic Behavior of RC Beam to PVC-CFRP Confined Concrete Column Exterior Joint with Steel Tube Connector

Seismic behavior study on RC-beam to CFST-column non-welding joints in field construction

STUDY ON SEISMIC PERFORMANCE OF RC BEAM-COLUMN JOINTS WITH A MODIFIED BOUC-WEN MODEL