Dynamic and energy analysis of coalescence-induced self-propelled jumping of binary unequal-sized droplets

Yuhang Wang,Pingjian Ming

DOI: https://doi.org/10.1063/1.5139417

IF: 4.6

2019-12-01

Physics of Fluids

Abstract:The coalescence-induced self-propelled droplet jumping on superhydrophobic surfaces has a large number of potential applications such as enhancement of condensation heat transfer, self-cleaning, and anti-icing, which becomes a current hotspot. At present, most of the research studies focus on the self-propelled jumping of two identical droplets; however, the jumping induced by unequal-sized droplets is much closer to actuality. In this paper, the coalescence-induced self-propelled jumping of binary unequal-sized droplets is simulated and all energy terms are studied. The normalized liquid bridge width induced by unequal-sized droplets is a function of the square root of the normalized time, and the maximum jumping velocity is a function of the radius ratio as well. The maximum jumping velocity descends with the decrease in the radius ratio and contact angle, and the critical radius ratio shows an upward trend with the decrease in the contact angle. Furthermore, all energy terms decline with the decrease in the radius ratio. The effective energy conversion rate of binary equal-sized jumping is very low, less than 3% in our results. This rate of binary unequal-sized jumping further reduces due to the existence of asymmetric flow. This work helps for a better understanding of the characteristics of coalescence-induced self-propelled droplet jumping.

mechanics,physics, fluids & plasmas

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the dynamics and energy analysis of the self - driven jumping phenomenon after the coalescence of droplets of different sizes. Specifically, the research focuses on how self - driven jumping occurs after the coalescence of two unequal - sized droplets on a super - hydrophobic surface, and the changes of various energy terms in this process. This phenomenon has a wide range of application prospects, such as improving the efficiency of condensation heat transfer, self - cleaning and anti - icing.

### Research Background and Problems
1. **Phenomenon Description**:
- The coalescence of droplets can cause the droplets to spontaneously jump from the super - hydrophobic surface, and this phenomenon is common in nature and industrial production.
- Most of the existing research focuses on the jumping after the coalescence of droplets of the same size, while in practical applications, unequal - sized droplets are more common.

2. **Research Objectives**:
- To simulate and analyze the dynamic process of self - driven jumping after the coalescence of two unequal - sized droplets.
- To study the changes of various energy terms in this process, including the release of surface energy, the conversion of kinetic energy, viscous dissipation energy and adhesion work.

### Main Findings
1. **Relationship between Liquid Bridge Width and Time**:
- After the coalescence of unequal - sized droplets, the liquid bridge width \( \frac{r_b}{r_1} \) has a square - root relationship with the normalized time \( \sqrt{\frac{t}{\tau}} \).
- The formula is expressed as: \[ \frac{r_b}{r_1} = C \sqrt{\frac{t}{\tau}} \]

2. **Relationship between Maximum Jumping Velocity and Radius Ratio**:
- The maximum jumping velocity decreases as the radius ratio decreases.
- The smaller the radius ratio, the lower the maximum jumping velocity. When the radius ratio is less than a certain critical value, the droplet cannot jump and can only oscillate on the surface.
- The formula is expressed as: \[ U^* = 0.087 - 0.70787 n + 1.78293 n^2 - 0.96256 n^3 \quad (n \geq 0.25) \]

3. **Influence of Contact Angle**:
- The contact angle also has an important influence on droplet jumping.
- A larger contact angle is conducive to droplet jumping, while a smaller contact angle will lead to a larger solid - liquid contact area, which is not conducive to jumping.
- The critical radius ratio decreases as the contact angle increases.

4. **Energy Conversion Rate**:
- The energy conversion rate (that is, the proportion of surface energy converted into translational kinetic energy) is very low. For the jumping of droplets of the same size, the conversion rate is less than 3%.
- For the jumping of unequal - sized droplets, due to the existence of asymmetric flow, the energy conversion rate is further reduced.

### Conclusion
Through numerical simulation and energy analysis, this study reveals the dynamic characteristics and energy conversion mechanisms of self - driven jumping after the coalescence of unequal - sized droplets. These findings are helpful for better understanding this phenomenon and providing theoretical support for related applications.