Abstract:Aiming at the unsatisfactory low-frequency sound absorption effect of Helmholtz resonator, a novel broadband low-frequency ventilation absorber with rough neck is proposed. The roughness is introduced into the neck of Helmholtz resonator to change the shape of the neck and achieve the structure of rough neck Helmholtz resonator. The proposed absorber can effectively provide the acoustic impedance required for low-frequency sound absorption without changing the overall size, thereby reducing the resonant frequency. The finite element method is used to simulate the structure, and the impedance tube sound absorption test is carried out to verify it. The experimental and simulation results show high consistency with each other. The results also indicate that the rough neck Helmholtz resonator absorber with roughness introduced in the neck achieves an absorption peak at 58 Hz, with an absorption coefficient of about 0.63. Comparing with the absorber without roughness introduced, the resonant peak frequency becomes low, from 70 Hz to 58 Hz, reducing 17.1%. Therefore, adjusting the neck roughness can serve as a method of tuning the acoustic performance, and the absorption peak frequency can be adjusted by appropriately increasing the neck roughness so as to move it in the low frequency direction. Based on the verification that the roughness of the neck can effectively reduce the absorption peak frequency of Helmholtz resonator, a broadband low-frequency ventilation absorber with a rough neck, which is composed of eight absorption units, is designed. Through simulation calculation and experimental exploration, the absorption coefficient can achieve more than 0.8 in a target working frequency band of 500－1100 Hz. On this basis, the acoustic impedance of the structure can be adjusted by introducing roughness into the neck of Helmholtz resonator, so as to obtain the optimized broadband low-frequency ventilation absorber with a rough neck, which achieves a broadband sound absorption coefficient higher than 0.8 in a frequency range of 400–1200 Hz. The optimized structure also has 8 consecutive absorption peaks with amplitudes above 0.95. The proposed low-frequency broadband ventilation absorber provides a reference for designing and optimizing efficient low-frequency subwavelength acoustic absorbers. It has a wide range of applications in pipeline noise control.

Effective wide‐band, low‐frequency multiple resonator sound absorber

An extra-broadband compact sound-absorbing structure composing of double-layer resonator with multiple perforations.

Flexible Design and Realization of Wideband Microwave Absorber with Double-Layered Resistor Loaded FSS

Rectangular extended neck Helmholtz resonant acoustic structure for low frequency broadband sound absorption

Low-frequency broadband acoustic metamaterial absorber based on nested resonator and synergistic coupled weak resonances

A Low-Frequency Wideband Ventilation Muffler Based on an Embedded Rough-Necked Helmholtz Resonator

Broadband Compact Acoustic Absorber with High-Efficiency Ventilation Performance

Ultra-thin low frequency perfect sound absorber with high ratio of active area

On the Design of Wideband Absorber Based on Multilayer and Multiresonant FSS Array

Development of a low-frequency broadband sound absorber based on a micro-perforated panel coupled with the Helmholtz resonator system

Broadband Thin Sound Absorber Based on Hybrid Labyrinthine Metastructures with Optimally Designed Parameters

Acoustic Metamaterial Composed of Zigzag Channel and Micro-Perforated Plate for Enhanced Low-Frequency Sound Absorption

Multiband Asymmetric Sound Absorber Enabled by Ultrasparse Mie Resonators.

Adjustable Sound Absorber of Multiple Parallel-Connection Helmholtz Resonators with Tunable Apertures Prepared by Low-Force Stereolithography of Photopolymer Resin

Machine Learning-Assisted Low-Frequency and Broadband Sound Absorber with Coherently Coupled Weak Resonances

Deep subwavelength acoustic metamaterial for low-frequency sound absorption

On improving low-frequency sound absorption using a compound microperforated panel backed by a panel-type resonator with tuned multi-frequency resonators

Low-frequency broadband sound absorption of the metastructure with extended tube resonators and porous materials

Recent Advancements in Helmholtz Resonator Based Low-Frequency Acoustic Absorbers: A Critical Review

Low-frequency sound-absorbing metasurface constructed by a membrane-covered and coiled Helmholtz resonator

Enhancement of sound absorption performance of Helmholtz resonators by space division and chamber grouping