Abstract:Biodegradable implants are a new concept to substitute current nondegradable medical materials. The biodegradable implant can decompose in the patients' body when the treatment is finished and be discharged through metabolism. Mg alloys, with their biocompatibility and high reactivity, meet the requirements of a biodegradable material. Also, Mg has a similar density to the human bones and the lowest elastic modulus among the structural metallic biomaterials, which can mitigate the stress shielding effect. For Mg-Zn-Ca alloys, besides the merits of Mg, Zn is related to bone metabolism and osteopathic phosphate activity, while Ca is the main element of bones that is essential for the synthesis of bone compounds. However, the degradation rate of Mg alloy implants needs to be controlled, or the implant may corrode too fast, causing local hydrogen accumulation and alkalization that hurts the patients. One of the effective ways to improve the alloy corrosion resistance is by coating. Ca-P coatings, such as brushite (dicalcium phosphate dihydrate, DCPD) and hydroxyapatite (HA), can mitigate the degradation rate of Mg alloys and show good biocompatibility and osseointegration. Electrodeposition is a simple way to synthesize coatings on metallic materials with an easy experimental set-up, and the process parameters are highly controllable. Even though there are plenty of reports about the fabrication of Ca-P coatings on Mg alloys through electrodeposition, few of them focus on the film formation mechanism. Issues related to coating defect formation and inhomogeneity are rarely discussed. Therefore, this report focuses on the film formation mechanism and the relationship to the defects of the electrodeposited DCPD coating on a Mg-2.5wt%Zn-1wt%Ca alloy. By altering the deposition potential, the reduction reactions that proceed on the substrate are different. The involvement of H 2 O reduction affects the formation of DCPD and changes the microstructure of the coating. Combining electrochemical tests and microstructure analysis, the corrosion properties of the coatings are measured, and the results are linked to the difference in film microstructure and defects. With SEM/FIB cross-sectional observations, the formation mechanism of the coatings and the relationship to the process condition will be discussed. The degradation rate of Mg alloys can be tuned by understanding the DCPD film formation mechanism and the cause of the defects.

Electrodeposition of hydroxyapatite coating on Mg alloy modified with organic acid self-assembled monolayers

Electrolytic Deposition of Magnesium-Substituted Hydroxyapatite Crystals on Titanium Substrate

Preparation and Characterization of Hydroxyapatite Coating on AZ31 Mg Alloy for Implant Applications

Study of Mg-Rich Sulfato-Calcium Hydroxyapatite Coating on Anodized Ti6Al4V-Alloy for Biomedical Applications

Effects of composition and hierarchical structures of calcium phosphate coating on the corrosion resistance and osteoblast compatibility of Mg alloys

Electrodeposition of Ca-P coatings on biodegradable Mg alloy: in vitro biomineralization behavior

Preparing a Bioactive (Chitosan/Sodium Hyaluronate)/SrHA Coating on Mg–Zn–Ca Alloy for Orthopedic Implant Applications

Electrochemical and In Vitro Biological Evaluation of Bio-Active Coatings Deposited by Magnetron Sputtering onto Biocompatible Mg-0.8Ca Alloy

Mg ions incorporated phytic acid (PA) and zoledronic acid (ZA) of metal-organic complex coating on biodegradable magnesium for orthopedic implants application

Plasma-Sprayed Hydroxyapatite-Strontium Coating for Improved Corrosion Resistance and Surface Properties of Biodegradable AZ31 Mg Alloy for Biomedical Applications

Improving hydroxyapatite coating ability on biodegradable metal through laser-induced hydrothermal coating in liquid precursor: Application in orthopedic implants

Electrochemical Deposition of Hydroxyapatite Co-Substituted By Sr/Mg Coating on Ti-6Al-4V ELI Dental Alloy Post-MAO as Anti-Corrosion

Metal-organic complex coating for enhanced corrosion control and biocompatibility on biodegradable magnesium alloy for orthopaedic implants

A ceria/calcium-phosphate functional composite coating on magnesium alloy for enhanced adhesion strength, corrosion resistance, and biocompatibility

A novel Ca-Mg-P/PDA composite coating of Mg alloys to improve corrosion resistance for orthopedic implant materials

Composite PCL/HA/simvastatin electrospun nanofiber coating on biodegradable Mg alloy for orthopedic implant application

Tunable Microstructure and Morphology of the Self-Assembly Hydroxyapatite Coatings on ZK60 Magnesium Alloy Substrates Using Hydrothermal Methods

Controlling the Degradation Rate of Biodegradable Mg–Zn-Mn Alloys for Orthopedic Applications by Electrophoretic Deposition of Hydroxyapatite Coating

(Digital Presentation) Formation Mechanism and Defects of Electrodeposited Ca-P Coating on Biodegradable Mg-Zn-Ca Alloy

Recent advances in hydrothermal modification of calcium phosphorus coating on magnesium alloy

Effects of phosphates on microstructure and bioactivity of micro-arc oxidized calcium phosphate coatings on Mg-Zn-Zr magnesium alloy