Abstract:Effective mixing is essential for biochemical reactions. In droplet-based microfluidics, immediate mixing of substances upon contact in the droplet formation stage can greatly enhance the uniformity of chemical reactions. Furthermore, it eliminates the need for implementing micromixers in the chip. In our research, we conducted a comprehensive study by first employing a series of two-dimensional (2D) numerical simulations, followed by experimental investigations using three-dimensional-printed (3D-printed) microfluidic chips. Our primary focus was on assessing the mixing efficiency within droplets. Specifically, we compared the performance of three different types of droplet generators: T-junction, cross-junction, and a novel asymmetric design with various angles. Our evaluation criteria encompassed mixing efficiency, droplet diameter, and droplet eccentricity. Our findings indicate that 2D numerical simulations can serve as a valuable tool for qualitatively analyzing two-phase flows and the droplet generation process, particularly in quasi-two-dimensional devices. The relative simplicity of such simulations renders them readily applicable, specifically in complex microfluidic geometries. Regarding mixing efficiency, we observed that the asymmetric droplet generators outperformed the cross-junction configuration but fell slightly short of the mixing efficiency achieved by the T-junction. Additionally, while the mixing index in the asymmetric generators closely matched that of the T-junction, these asymmetric generators produced smaller droplets. Our study suggests that the novel asymmetric droplet generators offer a significant advantage by simplifying the design of microfluidic devices. This is achieved by facilitating both droplet formation and rapid reagent mixing within the droplets while concurrently maintaining a small droplet diameter.

Computational fluid dynamics and experimental investigations on liquid–liquid mass transfer in T-type microchannels with different mixing channel barrier shapes

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Mixing in T-shaped Micro-Channel Network

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

Characterization of Liquid-Liquid Two-Phase Flow Patterns and Mass Transfer Coefficients in Human-Shaped Microchannels

Velocity Measurement of Flow in the Microchannel with Barriers Using Micro-PIV

Numerical Simulation of the Scalar Mixing Characteristics in Three-dimensional Microchannels

Hydrodynamics and Mass Transfer of Liquid-Liquid Two-Phase Flow in Circular Milli-Channels: Sizing-up Effect

Numerical analysis of a microfluidic mixer and the effects of different cross-sections and various input angles on its mixing performance

Investigating Mixing Efficiency in Droplets: A Comprehensive Study of Numerical Modeling and Experimental Testing in 3D-Printed Microfluidic Devices

Performance analysis of combined zigzag and curved micromixers

Experimental and Numerical Research on the Flow in Microchannel with Barriers

Characterization of the oil water two phase flow in a novel microchannel contactor equipped with helical wire static mixer

A Modified T-Mixer Simulation, Fabrication, and Characterization For 1D Diffusion Controlled Studies

Computational Fluid Dynamic Simulation of Liquid-Liquid Mixing in a Static Double-T-shaped Micromixer

Evaluation of the mixing performance of three passive micromixers

Investigations of the mixing efficiency of five novel micromixer designs with backward arrow inlet using the Villermaux Dushman protocol

Numerical investigation of mixing improvement in a novel spiral microchannel with baffles

Introducing Novel Planar Micromixers with Pillars and Gaps and Studying the Impact of Various Geometric Parameters on the Efficiency of Micromixers

Experimental study of extraction fraction and mass transfer coefficient in a microchannel using butyl acetate/acetic acid/water chemical system