Abstract:The use of seawater, sea sand and coral to formulate concrete for marine engineering construction is an effective measure for rationally allocating resources and alleviating resource shortages. To promote the engineering application of marine concrete, it is necessary to study the mechanical properties and microstructure of marine concrete. In this study, sea sand coral concrete (SSCC) with strength grades of C20–C40 was prepared, and the compressive and flexural tests were conducted to observe the stress process and damage morphology of the specimens and to establish a constitutive model for SSCC under uniaxial compression. In addition, the microstructures of the SSCC hydration products and interfacial transition zone (ITZ) were observed via X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the damage surface of the SSCC occurred directly through the coral aggregate, and the damage process was sudden and brief. Under uniaxial compression, the trend of the rising section of the stress-strain curve of SSCC with different strength grades are basically the same, but the shape of the descending section vary greatly, and the higher the strength grade is, the steeper the slope of the descending section. Quantitative relationships between compressive strength, elastic modulus, peak strain and peak stress and cube compressive strength were established. Based on the experimental results, a two-stage uniaxial compression constitutive model for SSCC was proposed, and the established constitutive model can effectively predict the stress-strain behavior of SSCC. In addition, the XRD patterns show that the early hydration rate of SSCC is faster than that of ordinary concrete (OC), which leads to a faster early strength development of SSCC. The SEM images show that the coral aggregate binds better to the cement matrix than the crushed gravel aggregate does and that the microstructure of the SSCC is denser than that of OC.

Research on the Regional Characteristics of Coastal Architectural Style and Demonstration of Marine Architectural Design

Failure Mechanism and Conservation of the Ancient Seawall Structure along Hangzhou Bay, China

Research on Architectural Space Design of Coastal Cities Based on Virtual Reality Technology

The Analysis of Characteristic Coastal Landscape Design

Key Issues in Seismic Stability Analysis of Reef Sites in South China Sea

Regional Seismic Damage Simulation Of Corroded Rc Frame Structures: A Case Study Of Shenzhen City

Research on Concrete Durability and Protection Technology in Marine Environment

Review and prospect of research on coastal land in China

Spatial function regionalization and governance of coastal zone: A case study in Ningbo City

Structural Materials, Ventilation Design and Architectural Art of Traditional Buildings in Guangdong, China

Coastal Erosion Vulnerability in Mainland China Based on Fuzzy Evaluation of Cloud Models

Coastal Engineering Evolution in Low-Lying Areas and Adaptation Practice Since the Eleventh Century, Jiangsu Province, China

Foreign experience of architectural and spatial organization of coastal territories

Experimental Study on the Mechanical Properties and Uniaxial Compressive Constitutive Relationship of Sea Sand Coral Concrete

Coastal distributions of design environmental loads in typhoon-affected sea area based on the trivariate joint distribution and environmental contour method

The influence of earthquakes on Zhubi Reef in the Nansha Islands of the South China Sea

The new architectural expression of Minnan Architechure

Assessment of Submarine Landslide Susceptibility in the Sea Area of Zhoushan

Modelling Solitary Waves and Its Impact on Coastal Houses with SPH Method

Investigation method and practice of marine hazard bearing body in Lianyungang city, Jiangsu province

Experimental investigation of focused wave action on coastal bridges with box girder