Abstract:Previous studies on the austenite grain growth were mostly based on a fixed temperature, and the relationship between the austenite grain and austenitizing parameters was fitted according to the results. However, there is a lack of quantitative research on the austenite grain growth during the heating process. In the present work, based on the diffusion principle of the controlled Ti microalloying element, the diffusion process of carbonitrides containing Ti during the heating process was analyzed. Combined with the precipitation model and the austenite growth model, the prediction model of austenite grain growth of Ti microalloyed steel during different heat treatment processes was established. The austenite grain size versus the temperature at four different heating rates of 0.5, 1, 10, 100 °C/s was calculated. The grain growth behavior of austenite during the heating process of Ti microalloyed steel was studied by optical microscope, scanning electron microscope and transmission electron microscope. The experimental data of the austenite grain size was in good agreement with the calculation by the proposed model, which provides a new idea for the prediction of austenite grain size in non-equilibrium state during the heating process. In addition, for Ti-containing microalloyed steels, the austenite grain size increased with the increasing heating temperature, while it changed little by further prolonging isothermal time after certain heating time, which was related to the equilibrium degree of the precipitation and the dissolution of Ti element. The austenite grain coarsening temperature of the tested Ti microalloyed steel was estimated within 1100~1200 °C.

Study on the grain size control of metatitanic acid in a mixture acid system based on Arrhenius and Boltzmann fitting

Multi-Scale Coupling Model Involving Bed and Catalyst Particle for MTP Reactor Simulation

Study on Preparation of Metatitanic Acid by Hydrolysis in the Process of Producing Titanium Dioxide by Decomposition of Titanium Slag with Alkali Molten Salt

Effects and optimization of hydrolysis conditions on the diameter distance ratio for metatitanic acid

Hydrothermal preparation of high purity TiO2 from industrial metatitanic acid by response surface methodology

Mechanism and kinetics study of sulfuric acid leaching of titanium from titanium-bearing electric furnace slag

A study on the synthesis of coarse TiO2 powder with controlled particle sizes and morphology via hydrolysis

Study on Continuous Hydrolysis in a Microchannel Reactor for the Production of Titanium Dioxide by a Sulfuric Acid Process.

Influence of AMT on Diacetatozirconic Acid-bonded Yttria Shell and Titanium a-Layer

Kinetics of Hydrochloric Acid Leaching of Titanium from Titanium-Bearing Electric Furnace Slag

Effect of sulfate on crystal phase transition and crystal growth of titanium dioxide in metatitanic acid calcination

Reaction kinetics of roasting high-titanium slag with concentrated sulfuric acid

Thermodynamics analysis and experiments on Ti-bearing blast furnace slag leaching enhanced by sulfuric acid roasting

Synergistic Leaching of Titanium, Aluminum, and Magnesium Components during Dilute Acid Pressure Treatment of High-Titanium Blast Furnace Slag

Tailoring the Brønsted acidity of Ti‐OH species by regulating Pt‐TiO2 interaction

Austenite Growth Behavior and Prediction Modeling of Ti Microalloyed Steel

New insights into pathways and kinetic of magnesiothermic reduction of titanium tetrachloride in titanium metallurgy

The Influence of Sulphuric Acid Concentration on the Nanograde SO_4 ~(2-)/Tio_2 Solid Super Acid

Pressure Behaviors and Isothermal Kinetics of Magnesiothermic Reduction of Titanium Tetrachloride in a Semi-batch Reactor

A thermodynamic model of the titanium distribution behaviour between slag and molten steel during LF refining process: description and application