Abstract:The biomedical sector requires the use of composite materials whose properties can replace those of defective organs, especially bones, of which the Hydroxyapatite structure is the main component of bones and teeth. Herein, we report successful elaboration of new Mg-rich sulfato-calcium hydroxyapatite (SCHA) coating by cathodic electrodeposition on an anodized Ti6Al4V alloy substrate under bias voltages of 10, 20 and 30 V. The resulting deposits were well identified by numerous characterization techniques, such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and scanning electron microscopy (SEM). Anodizing the Ti-based substrate under a bias voltage of 20 V produces TiO 2 layers with ordered nanotube arrays of approximately (80-100 nm), which are completely damaged at 30 V, leading to an irregular porous structure. The deposits made at 10 and 20 V present cracks, unlike that made at 30 V which is more uniform and less rough. XRD analysis reveals both an amorphous structure for the latter and the existence of a crystalline to amorphous conversion as a function of the anodization voltage for the apatite deposition. Electrochemical tests performed in Hank's simulated body fluid (HSBF) confirm the formation of the apatite deposit which implies a chemical surface modification and reveal interesting anticorrosion properties for the apatite-coated samples, with the highest polarization resistance recorded for that treated at 20 V, with a corrosion current density ( i corr ) of 4.25 μA/cm 2 and a polarization resistance ( R p) of 4.60 kΩ cm 2 . The results obtained confirm both the nature and the structure of the produced deposits (TiO 2 layers and Mg-SCHA/TiO 2 ). Electrochemical tests performed in Hank's simulated body fluid (HSBF) reveal interesting anticorrosion properties for coated and anodized samples, compared to those uncoated, with the highest corrosion resistance recorded for the anodized sample at 10 V. This suggests that the biocompatible Mg-rich SCHAs deposit, elaborated by simple chemical route from biological waste could be suitable for biomedical purposes.

Electrophoretic deposition of hydroxyapatite-iron oxide-chitosan composite coatings on Ti–13Nb–13Zr alloy for biomedical applications

Characterization, electrochemical behavior and in vitro hemocompatibility of hydroxyapatite-bioglass-iron oxide-chitosan composite coating by electrophoretic deposition

Electrophoretic Deposition of Graphene Oxide Reinforced Chitosan–hydroxyapatite Nanocomposite Coatings on Ti Substrate

The electrochemical and in-vitro study on electrophoretic deposition of chitosan/gelatin/hydroxyapatite coating on 316L stainless steel

Structural characterization, mechanical, and electrochemical studies of hydroxyapatite-titanium composite coating fabricated using electrophoretic deposition and reaction bonding process.

Electrophoretic deposition of chitosan–bioglass®–hydroxyapatite–halloysite nanotube composite coating

Physicochemical and biological behaviour of biogenic derived hydroxyapatite and carboxymethyl cellulose/sodium alginate biocomposite coating on Ti6Al4V alloy for biomedical applications

Synthesis and characterization of hydroxyapatite coatings with superior performance for corrosion protection of Ti-6Al-4V alloy in simulated bodily fluid

On surface Modification of Ti Alloy by Electro Discharge Coating Using Hydroxyapatite Powder Mixed Dielectric with Graphite Tool

Study of Mg-Rich Sulfato-Calcium Hydroxyapatite Coating on Anodized Ti6Al4V-Alloy for Biomedical Applications

Improving the corrosion resistance and the osteointegration of hydroxyapatite coatings through the incorporation of synthesized mesoporous SiO2/HA particles

Electrochemical corrosion study of chitosan-hydroxyapatite coated dental implant

Electrohydrodynamic Coating of Metal with Nano-Sized Hydroxyapatite.

Characterization of Hydroxyapatite/Chitosan Composite Coating Obtained from Crab Shells on Low-Modulus Ti–25Nb–8Sn Alloy through Hydrothermal Treatment

Preparation and Properties of Hydroxyapatite/Chitosan Coatings on Ti Surface by Different Electrochemical Methods

Characterization and corrosion behavior of plasma sprayed calcium silicate reinforced hydroxyapatite composite coatings for medical implant applications

Investigation of structure, morphology, and corrosion behavior of carboxylic acids/hydroxyapatite/chitosan coatings on Ti disks for implants

In-Situ Synthesis and Characterization of Chitosan/Hydroxyapatite Nanocomposite Coatings to Improve the Bioactive Properties of Ti6Al4V Substrates

Osteogenic and antiseptic nanocoating by in situ chitosan regulated electrochemical deposition for promoting osseointegration

The effect of silver nanoparticles on biological and corrosion behavior of electrophoretically deposited hydroxyapatite film on Ti6Al4V

Electrophoretic deposition and characterization of composite chitosan/Eudragit E 100 or poly(4-vinylpyridine)/mesoporous bioactive glass nanoparticles coatings on pre-treated titanium for implant applications