Abstract:Synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films. Polyvinyl alcohol (PVA) is a widely used polymer that is biocompatible, nontoxic, and water‐soluble due to the presence of hydroxyl groups in its domain. This study aims to investigate the effects of fumaric acid (FA) cross‐linking and thermal cross‐linking (TC) on the PVA's mechanical and thermal properties. When the FA is mixed with PVA, it was found in the chemical reaction that the OH groups of PVA are condensing with the carboxylic acid units of FA to yield new ester linkages and water as a by‐product, which further results in the reduction of the water absorption capacity. Quantitatively, the addition of 8 (wt. /wt. %) FA resulted in a minimum of 65% water absorption rate, as compared with 117% for pure PVA. The mechanical and thermal properties of PVA also enhanced with the addition of 2% to 8% FA by weight. For the TC case, the % increase in ultimate tensile strength was 30.9% and 42.5% with and without TC, respectively. As the wt. % of FA increased from 2 to 10%, the % elongation value decreased for both with and without TC films relative to pure PVA. The thermogravimetric analysis revealed the change in degradation temperature of FA‐PVA blended film in comparison with pure PVA. Dynamic mechanical analysis was utilized to analyze the viscoelastic nature and temperature variation at the glass transition temperature. The current fabricated film is a potential candidate for the food packaging films application; moreover, the results reported in this investigation will accelerate the industrial applications of biodegradable PVA. Highlights Increasing the weight percentage of fumaric acid leads to an enhancement in mechanical and thermal properties of the film. Esterification is the usual reaction between fumaric acid and polyvinyl alcohol (PVA), in which ester linkages are formed when the carboxyl groups (‐COOH) of fumaric acid and the hydroxyl groups (‐OH) of PVA combine. Water absorption characteristics of the film reduces as the wt. % of fumaric acid increases. Thermal cross‐linking of the film leads to further improvements in mechanical and thermal properties. The overall effect of increasing the wt. % of fumaric acid is negative on the glass transition temperature of the film. The developed film is a potential candidate for the food packaging films application.

Preparation and characterization of PVA-Ge/PEG-400 biodegradable plastic blend films for packaging applications

Eco-friendly synthesis of biodegradable and high strength ternary blend films of PVA/starch/pectin: Mechanical, thermal and biodegradation studies

Preparation and characterisation of polyvinyl alcohol/glycerol blends thin film for sustainable flexibility

In situ synthesis of Ag NPs in the galactomannan based biodegradable composite for the development of active packaging films

Preparation and characterization of polyvinyl alcohol/glutaraldehyde cross-linked chitosan/ε-Polylysine degradable composite film and its antibacterial effect

Preparation, mechanical, and thermal properties of biodegradable polyesters/poly(lactic acid) blends

Preparation and Characterization of Polyvinyl Alcohol/glutaraldehyde Cross-Linked Chitosan/e-Polylysine Degradable Composite Film and Its Antibacterial Effect

Evaluation of mechanical, permeation, and degradation properties of poly(hydroxybutyrate) blends for sustainable packaging

Experimental synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films: Implications as a sustainable matrix for composites

Mechanical and physicochemical properties of green bio-films from poly(Vinyl Alcohol)/ nano rice hull fillers

Fabrication and characterization of biodegradable active films with modified morphology based on polycaprolactone-polylactic acid-green tea extract

Structural and Physiochemical Properties of Polyvinyl Alcohol–Succinoglycan Biodegradable Films

Radiation modification and characterization of polyvinyl alcohol/starch/citric acid/glycerol bioblend film

In Situ Formation of Microfibrillar PBAT in PGA Films: An Effective Way to Robust Barrier and Mechanical Properties for Fully Biodegradable Packaging Films

Development of low density polyethylene/sago based biofilm via blow film molding technique

Effect of Different Ratios of Polyvinyl Alcohol‐Gum Odina for the Preparation and Characterization of Biodegradable Composite Films

Physicochemical and antimicrobial properties of Phyllanthus reticulatus fruit extract doped chitosan/poly (vinyl alcohol) blend films for food packaging applications

Development of biocompatible packaging material: starch/PVA-based bio-composite enhanced with hydroxypropyl methylcellulose

Development and characterization of a biodegradable film based on guar gum-gelatin@sodium alginate for a sustainable environment

Water-soluble polysaccharides extracted from Enteromorpha prolifera/PVA composite film functionalized as ε-polylysine with improved mechanical and antibacterial properties

New polyvinyl alcohol/gellan gum-based bioplastics with guava and chickpea extracts for food packaging