Abstract:The effects of hole shape and orientation on the mechanical properties of micro-scale 2D honeycomb structures, fabricated using a focused ion beam equipment, have been investigated using an in situ micro-mechanical testing machine inside the scanning electron microscope . The material used was single-crystal Ni oriented in the direction, with the plane of the 2D micro-lattice having a {001} normal direction. The hole shapes explored were hexagonal and circular, while two different orientations of the hexagonal holes were also compared. One of these orientations had a horizontal arm (designated 0° orientation), while the other had a vertical arm (30° orientation) in each hexagon. The results indicate that there is substantial change in strength and ductility depending on the orientation and shape of the holes with respect to the tensile axis. The samples with 30° oriented hexagonal holes had the lowest strength and highest ductility, while the samples with circular holes showed the greatest yield and tensile strength. The samples with the 0° orientated hexagonal holes had much higher strength and lower ductility than the 30° orientated ones. Moreover, the samples with 0° orientated hexagonal holes, which had a similar hole pattern arrangement to the ones with circular holes, had a similar strength to those of the latter type. Thus, it is apparent from this study that the orientation or arrangement of the holes is more important in determining the properties of the 2D microlattice than the shape of the holes. Finite element simulation of the lattice structures utilised the GTN (Gurson, Tvergaard and Needleman) model to evaluate the failure modes under uniaxial tension. The lattice structure has been shown, in a previous paper by the authors, to exhibit composite like behaviour with strength differences in various parts arising from size effects. These size effect variations were incorporated into the model, and a generalised formulation for the GTN parameters was proposed on the basis of one of the experimental configurations and subsequently applied to the other geometries. The models were in good quantitative agreement with the experimental results with accurate representation of the flows stress and failure modes.

Microscopic definition of internal force, moment, and associated stiffnesses in one-dimensional nanostructures at finite temperature

Coupled Thermomechanics Of Single-Wall Carbon Nanotubes

Thermomechanical analysis of the effect of contact forces in heat conduction of composite materials through multiscale contact finite element modeling

Size-Dependent Effective Elastic Constants of Solids Containing Nano-Inhomogeneities with Interface Stress

Stress and heat flux for arbitrary multi-body potentials: A unified framework

Internal sites of actuation and activation in thin elastic films and membranes of finite thickness

Deformation of Solids with Nanoscale Pores by the Action of Capillary Forces

Theory of elastic constants of athermal amorphous solids with internal stresses

Internal phase transition induced by external forces in Finsler geometric model for membranes

On the Elastic Rod Models for Mechanical Tests of One-Dimensional Nanostructures under Transverse Loads

Modal analysis for determining the size-and temperature-dependent bending rigidity of graphene

Size Effects of Hair-Sized Structures – Torsion

Mechanical Properties of Small Quasi-Square Graphene Nanoflakes

A multiscale analysis of fixed-end simple shear using molecular dynamics, crystal plasticity, and a macroscopic internal state variable theory

Interfacial Diffusion Aided Deformation During Nanoindentation

A generalized functions based approach for stress-driven nanobeam bending problems subjected to point loads

Nano-Mechanics or How to Extend Continuum Mechanics to Nano-Scale

Statistical mechanics of nanotubes

Deformation behaviour of hexagonal- and circular-patterned Ni single-crystal 2D micro-lattices via in situ micro-tensile testing and computational analysis

A continuum model for brittle nanowires derived from an atomistic description by $Γ$-convergence