Abstract:Efficient organic photovoltaic cells (OPVs) are fabricated using two structurally similar Y6 derivations (BTP‐BO‐4F and Y6‐1O) as acceptor and PM6 as donor. The two binary OPVs exhibit a high fill factor (FF) (>76%), the complementary short‐circuit‐current density (JSC) and open‐circuit voltage (VOC). The high FFs of binary OPVs indicate the good compatibility of corresponding materials to form efficient charge transport channels. A power conversion efficiency (PCE) of 17.59% is obtained from ternary OPVs with 15 wt% Y6‐1O in acceptors, benefiting from the simultaneously improved JSC of 26.13 mA cm−2, a VOC of 0.860 V, and an FF of 78.26%. The values of VOC of ternary OPVs can be gradually increased along with the incorporation of Y6‐1O, suggesting the preferred formation of an alloyed state between BTP‐BO‐4F and Y6‐1O due to their good compatibility. Meanwhile, the cascaded energy levels of BTP‐BO‐4F and Y6‐1O can form efficient electron transport channels in ternary active layers. The main contribution of Y6‐1O can be summarized as enhancing photon harvesting, optimizing phase separation, and adjusting molecular arrangement. The experimental results may provide new insight on developing efficient ternary OPVs by selecting two well‐compatible acceptors. A power conversion efficiency (PCE) of 17.59% is achieved in ternary organic photovoltaic cells (OPVs) with BTP‐BO‐4F:Y6‐1O as alloyed acceptor, resulting from the simultaneously improved three photovoltaic parameters. The good compatibility of used materials is one of the prerequisites for achieving efficient ternary OPVs.

Over 17% efficiency ternary organic solar cells enabled by two non-fullerene acceptors working in an alloy-like model

Achieving High-Performance Ternary Organic Solar Cells through Tuning Acceptor Alloy.

Alloy-like ternary polymer solar cells with over 17.2% efficiency

Non-fullerene acceptor alloy strategy enabling stable ternary polymer solar cells with efficiency of 17.74%

Achieving Efficient Ternary Organic Solar Cells Using Structurally Similar Non‐Fullerene Acceptors with Varying Flanking Side Chains

Organic Solar Cells with 18% Efficiency Enabled by an Alloy Acceptor: A Two‐in‐One Strategy

Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10.

Ternary Organic Solar Cells with J71 As Donor and Alloyed Acceptors Exhibiting 13.16% Efficiency

Over 16.5% efficiency in ternary organic solar cells by adding an alloyed acceptor with energy transfer process

Ternary organic solar cells with PCEs of up to 16.6% by two complementary acceptors working in alloy-like model

Ternary Organic Photovoltaic Cells Exhibiting 17.59% Efficiency with Two Compatible Y6 Derivations as Acceptor

Nonalloy Model-Based Ternary Organic Solar Cells

Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors.

Highly Efficient Parallel-Like Ternary Organic Solar Cells

18.7% Efficiency Ternary Organic Solar Cells Using Two Non-Fullerene Acceptors with Excellent Compatibility

A facile strategy for third-component selection in non-fullerene acceptor-based ternary organic solar cells

Enhancing Intermolecular Packing and Light Harvesting through Asymmetric Non-Fullerene Acceptors for Achieving 18.7% Efficiency Ternary Organic Solar Cells

Tuning Voc for high performance organic ternary solar cells with non-fullerene acceptor alloys

Small Molecule Ternary Solar Cell with Two Synergistic Electron Acceptors for Enhanced Photovoltaic Performance

Over 17.5% efficiency ternary organic solar cells with enhanced photon utilization via a medium band gap non-fullerene acceptor

Non-fullerene acceptor fibrils enable efficient ternary organic solar cells with 16.6% efficiency