Abstract:The treatment of nanoparticle (NP) polluted aqueous suspensions by flotation can be problematic due to the low probability of collision between particles and bubbles. To overcome this limitation, the present work focuses on developing an enhanced flotation technique using the surface-functionalized micro-bubbles - colloidal gas aphrons (CGAs). The CGA generator was adapted to be air flow rate controlled based on the classical Sebba system; thus it could be well adopted in a continuous flotation process. Cetyl trimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) were employed for CGA creation. Positively surface-charged CTAB-CGAs (similar to 44.1 mu m in size) and negatively surface-charged SDS-CGAs (similar to 42.1 mu m in size) were produced at the optimum stirring speed of 8000 rpm. The half-life of CGAs varied from 100 s to 340 s under the tested conditions, which was largely sufficient for transferring CGAs from bubble generator to flotation cell. The air flow led to less stable CTAB-CGAs but apparently enhanced the stability of SDS-CGAs at higher air flow rates. In the presence of air flow, the drainage behavior was not much related to the type of surfactants. The continuous CGA-flotation trials highlighted the effective separation of silica nanoparticles - the removal efficiencies of different types of SiO2 NPs could reach approximately 90%-99%; however, at equivalent surfactant concentrations, no greater than 58% of NPs were removed when surfactants and bubbles were separately added into the flotation cell. The SiO2 NPs with small size were removed more efficiently by the CGA-flotation process. For the flotation with CTAB-CGAs, the neutral and basic initial SNP suspension was recommended, whereas the SDS-CGAs remained high flotation efficiency over all investigated pH. The good performance of CGA-flotation might be interpreted: most of the surfactant molecules well covered/coated on the surfaces of stable CGAs and thus fully contacted with NPs, resulting in the efficient utilization of surfactants. (C) 2017 Elsevier Ltd. All rights reserved.

Continuous Interfacial Centrifugal Separation and Recovery of Silver Nanoparticles

Separation of Nanoparticles Via Surfing on Chemical Wavefronts

Continuous Synthesis and Separation of Silver Nanoparticles Using an Aqueous Two-Phase System

Organic Solvent Nanofiltration with Nanoparticles Aggregation Based on Electrostatic Interaction for Molecular Separation

Development of Palladium Separation Process from Nitric Acid Medium Utilizing a New Hybrid Multi-Nitrogen Adsorbent

Surface-modified Microbubbles (colloidal Gas Aphrons) for Nanoparticle Removal in a Continuous Bubble Generation-Flotation Separation System.

Mechanistic Aspects of Simultaneous Extraction of Silver and Gold Nanoparticles across Aqueous-Organic Interfaces by Surface Active Iron Oxide Nanoparticles

Separation of cobalt and nickel via solvent extraction with Cyanex-272: Batch experiments and comparison of mixer-settlers and an agitated column as contactors for continuous counter-current extraction

Transport and Separation of the Silver Ion with n-decanol Liquid Membranes Based on 10-undecylenic Acid, 10-undecen-1-ol and Magnetic Nanoparticles

Rapid Separation and Purification of Nanoparticles in Organic Density Gradients

Intensification of silver nanoparticle synthesis through continuous flow split and recombine microreactors

Synthesis and separation of silver nanoparticles using an Aqueous Two-Phase System with citrate as reducing agent

Continuous Submicron Particle Separation Via Vortex-Enhanced Ionic Concentration Polarization: A Numerical Investigation

Self-adaptive virtual microchannel for continuous enrichment and separation of nanoparticles

Efficient Recovery and Enrichment of Rare Earth Elements by a Continuous Flow Micro-Extraction System

Total Integration of the Sample Injection, Microdroplet Reaction, Phase Separation, Real‐Time Optical Detection, and Recovery of Diverse Silver–Gold Bimetallic Nanoalloys in a Continuous Process

Applications of coagulation-sedimentation and ultrafiltration for the removal of nanoparticles from water

Cotinuous precision separation of gold using a metal-organic framework/polymer composite

Exploiting droplet impact-driven flows and jetting to guide and extract particles from particle-laden droplets

Preparation of Nonaqueous Silver Nanosuspensions by in Situ Dispersion of the Surface-Modified Nanoparticles

Nanoextraction based on surface nanodroplets for chemical preconcentration and determination