Abstract:Clay minerals are inexpensive, sustainable, and abundant natural minerals being considered as replacements for cement binders. For this purpose, clays have to be activated to improve their pozzolanic activity, i.e., to yield an amorphous aluminosilicate phase that can easily react with calcium hydroxide to form binding phases; additional calcium aluminosilicate hydrate and calcium aluminate hydrates. Activation plays a key role in boosting the cement replacing potential of clay minerals, with the key to understanding activation lying in the control of dehydroxylation. This work promotes mechanochemical activations for comprehensive executing, monitoring and understanding of the dehydroxylation during clay activation. We monitored the mechanochemical conditions, yield degree of amorphization and heat of hydration. Considering the lower dissipation of thermal energy and better control of amorphization mechanochemical conditions were set at 400 rpm for 2 h. Results point out to the disruption of the kaolinite structure on behalf of chemically bound water release and reorganization of Al chemical bonds. The results indicate that with an increase in TGA steps, there are shifts in kaolin dehydroxylation processes, such as water evaporation and spinel crystallization (DTA), as well as shifts in the respective IR bands. Additionally, there is an increase in specific surface area (BET) and a decrease in particle size (SEM, XRD). Calorimetry of the cement paste CEM I 52.5 N indicates an apparently higher thermal reactivity of the aluminate phase compared to the silicate phase as a function of the particle size distribution. The presence of the mechanochemically activated clay changed the morphology, particle size, specific surface area, amorphous content, and thus the availability of pozzolanic aluminum for cement hydration reactions, which is thereby accelerated. It was observed the aluminate phase exhibits higher reactivity. The hydration mechanisms of the silicate (C 3 S) and aluminate (C 3 A) phases as well as the depletion of SO 4 2– ions were affected. Consequently, mechanochemical processing can be utilized as a powerful tool to activate pozzolanic clay with cement-replacing potential.

Use of calorimetry and thermal analysis to assess the heat of supplementary cementitious materials during the hydration of composite cementitious binders

Programmatic Data Analysis for Quantitative Isothermal Heat Flow Calorimetry of Cementitious Materials

Early Hydration Properties and Reaction Kinetics of Multi-Composite Cement Pastes with Supplementary Cementitious Materials (Scms)

Application of isothermal calorimetry and thermal analysis for the investigation of calcined gypsum–lime–metakaolin–water system

Effect of four-component binder on characteristics of self-compacting and fibre-reinforced self-compacting mortars

Internal hydrophobic treatment for mortar containing supplementary cementitious materials: thermal analysis of kinetics and products of hydration

Calorimetric study of the pozzolanic potential developed by the mechanochemical activation of kaolin clay

Early metakaolin reactions in pozzolanic R3-test: calorimetry baseline correction of initial temperature jump due to ex-situ mixing

Calorimetric Study of Calcium Aluminate Cement Blended with Flue Gas Desulfurization Gypsum

Calorimetric Study of Ternary Binder of Calcium Aluminate Cement, Portland-limestone Cement and FGD Gypsum

Heat of hydration in ultralight cementitious foams incorporating metakaolin and microencapsulated phase change material

Characterization of supplementary cementitious materials by thermal analysis

Hydration of high alumina cement–silica fume composite with addition of Portland cement or sodium polyphosphate under hydrothermal treatment

Difficulties in Determining the Pozzolanic Activity of Thermally Activated Lower-Grade Clays

Comparison of thermogravimetry response of alkali-activated slag and Portland cement pastes after stopping their hydration using solvent exchange method

Cementitious composite materials for thermal energy storage applications: a preliminary characterization and theoretical analysis

Effect of Temperature on the Early-age Hydration and Setting Behaviour of Mixes Containing GGBS

Isothermal Calorimetry Tests and Modeling of Cement Hydration Parameters

Characterization of Supplementary Cementitious Materials and Fibers to Be Implemented in High Temperature Concretes for Thermal Energy Storage (TES) Application

Thermal Reactivation of Hydrated Cement Paste: Properties and Impact on Cement Hydration

Evaluate the effect of coarse aggregates on cement hydration heat and concrete temperature modelling using isothermal calorimetry