Abstract:Austenitic stainless steels have for some time been used as superheater tubes in the electricity generation industries in harsh environments with temperatures as high as 650°C at pressures of some 200 atm; they are expected to provide reliable service for 30 years or more. Their detailed mechanical properties are dependent on the stability of the microstructure, particularly the formation, dissolution, and coarsening of precipitates. Although the precipitation processes have been studied extensively, there remain important discrepancies. It is known that small changes in the chemical composition or thermomechanical processing can profoundly influence the evolution of the microstructure. This review focuses on precipitation in creep resistant austenitic stainless steels, in particular wrought heat resistant grades containing niobium and titanium additions. Conventional alloys such as 18–8 and 16–10 are included together with the new NF709 (20–25) and other recent variants. Precipitates forming in age hardening austenitic stainless steels are only briefly presented. Many studies have shown that MX is not a stoichiometric phase, and that chromium can be incorporated in the metal sublattice. Furthermore, the reported compositions show considerable variation. These studies are assessed and an explanation is offered, in terms of the Gibbs–Thompson effect, for the variation. A rational consideration of all the results suggests a size dependence in line with capillarity considerations. The MX phase does not form in isolation; its stability also depends on the formation of M23C6. The literature reveals that NbC is more stable than M23C6 but the case for TiC is less certain. The formation of Z phase in nitrogen bearing steels is a further complicating factor, and it is concluded that its formation is not adequately understood. This is unlike the case for M23C6, where there is consistent reporting in the literature. Finally, work on the M6C carbide in austenitic stainless steels is critically assessed. It is found that its detailed composition is not well characterised and that there are no general rules apparent about its formation. The review also covers intermetallic compounds such as σ phase. It is clear that chromium concentrations in excess of 18 wt-%, combined with a low carbon concentration, promote the formation of σ phase. This has implications particularly for steels containing niobium and titanium, both of which getter carbon. Other compounds reviewed include χ and G phases, which form at high temperatures and during very long aging such as that encountered in service.

From Austenitic Stainless Steel to Expanded Austenite-S Phase: Formation, Characteristics and Properties of an Elusive Metastable Phase

The “Expanded” Phases in the Low-Temperature Treated Stainless Steels: A Review

The Expanded Phases Formed in Stainless Steels by Means of Low-Temperature Thermochemical Treatments: A Corrosion Perspective

Precipitation in creep resistant austenitic stainless steels

Phase Characterization and Formation Behavior in 6 Wt% Si High-silicon Austenitic Stainless Steel During Isothermal Aging

Depth-Resolved Phase Analysis of Expanded Austenite Formed in Austenitic Stainless Steel

Light-weight Isometric-Phase Steels with Superior Strength-Hardness-ductility Combination

MECHANICAL AND CHEMICAL PROPERTIES OF LOW TEMPERATURE PLASMA SURFACE ALLOYED 316 AUSTENITIC STAINLESS STEEL

On the Thermo-Mechanical Stability and Oxidation Behavior of Carbon S-phase at Elevated Temperature and under Tensile Stress

Modelling and Simulation of Phase Formations in Martensitic Stainless Steels

Austenite/Ferrite Interface Migration and Alloying Elements Partitioning: an Overview

Mechanical Behavior and Fatigue Performance of Austenitic Stainless Steel under Consideration of Martensitic Phase Transformation

A Review of the Thermal Stability of Metastable Austenite in Steels: Martensite Formation

Effect of tensile stress on the formation of S-phase during low-temperature plasma carburizing of 316L foil

Microstructure Investigations of Phase Transformation in Cold Working AISI 316L Austenitic Stainless Steel

Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel

Low-Temperature Plasma Surface Modification of Medical Grade Austenitic Stainless Steel to Combat Wear and Corrosion

Comprehending the role of the S-phase on the corrosion behavior of austenitic stainless steel exposed to H2S/CO2-saturated liquid and vapor environments

Characterization of a nitrogen-rich austenitic stainless steel used for osteosynthesis devices

Combined Martensite and Bainite Formation from Austenite Decomposition in HSLA Steel

Microstructure and Mechanical Properties of a Novel Cast Multi-Phase Stainless Steel