Abstract:To address the current problems of high exhaust emission level of domestic agricultural equipments and serious human and environmental hazards of agricultural machinery engine emissions, in this study, an agricultural harvester diesel engine test platform was firstly built to conduct a biodiesel-diesel combustion emission test and collect data. In addition, an Artificial Neural Network high-precision model was designed and constructed for training and prediction of the outputs such as nitrogen oxides (NOx), hydrocarbons (HC), carbon monoxide (CO), opaque smoke, and post-turbo emission temperatures at different engine operating conditions and various biodiesel-diesel blend ratios, speed and engine load. The type of neural network selected is a feed-forward multi-layer perceptron network because of its advantage of reflecting the correlations between input and output. The model's regression coefficients of NOx, HC, CO, opaque smoke, and post-turbo emission temperatures R2 = 0.9822, 0.9934, 0.9937, 0.9967 0.9970, were close to 1; mean square error (MSE) = 9.79%, 7.73%, 6.48%, 9.58% 2.27%, root mean square error (RMSE) = 18.41 ppm, 3.21 ppm, 16.48 ppm, 0.39 m−1, 10.86 °C. The results show that the established models have high confidence and can be used for high-precision agricultural machinery engine emission prediction and calculation. Covariance Matrix Adaptation-Evolutionary Strategy (CMA-ES) was applied to obtain the best matching parameters for the optimum engine operating conditions with optimized emissions. The biodiesel-diesel blend ratio, engine speed, and engine load were optimized with different single-target emissions as the objective function, respectively. In addition, with multi-target emissions as the objective function, the values of the three optimization variables are 5%, 1850 rpm, 25% respectively. The error rate between the experimental data and predicted values is around 3%-10%, and thereby the method is considered practicable through experimental validation. The experimental results show that ANN supported by CMA-ES is a good method for predicting and optimizing emissions of diesel engines burning biodiesel-diesel blends in agricultural machinery.

Prediction modelling of exhaust characteristics of a marine engine for SCR urea dosing calibration

On the Use of Artificial Neural Networks to Model the Performance and Emissions of a Heavy-Duty Natural Gas Spark Ignition Engine

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Study on the effect of blending hydrocarbon-based biodiesel on the performance of SCR system and urea calibration method for marine engines

Neural Network-Based Prediction of NH3 Leakage from SCR Systems for Diesel Engines

Modeling and simulation of marine SCR system based on Modelica

An Artificial Neural Network Model to Predict Efficiency and Emissions of a Gasoline Engine

Investigation on the applicability of parameters identification of marine diesel engine SCR kinetic model based on Discrete-Grid algorithm

Predicting the Nitrogen Oxides Emissions of a Diesel Engine using Neural Networks

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

NOx emissions prediction in diesel engines: a deep neural network approach

Prediction and optimization of emission in an agricultural harvest engine with biodiesel-diesel blends by a method of ANN and CMA-ES

Dynamic Prediction Model for NOx Emission of SCR System Based on Hybrid Data-driven Algorithms

Emissions prediction of CNG/diesel dual fuel engine based on RBF neural network

Prediction and optimization of dual-fuel marine engine emissions and performance using combined ANN with PSO algorithms

Prediction and Control of the Nitrogen Oxides Emission for Environmental Protection Goal Based on Data-Driven Model in the SCR De-Nox System

Machine learning assisted prediction of exhaust gas temperature of a heavy-duty natural gas spark ignition engine

Artificial Neural Network-Based Prediction of Performances-Exhaust Emissions of Diesohol Piloted Dual Fuel Diesel Engine Under Varying Compressed Natural Gas Flowrates

Design and testing of an independently controlled urea SCR retrofit system for the reduction of NOx emissions from marine diesels

Research on fault prediction of marine diesel engine based on attention-LSTM