Comparative of alkaline hydrogen peroxide pretreatment using NaOH and Ca(OH)2 and their effects on enzymatic hydrolysis and fermentation steps

Perla Araceli Meléndez-Hernández,Javier Ulises Hernández-Beltrán,Alicia Hernández-Guzmán,Ricardo Morales-Rodríguez,Juan Carlos Torres-Guzmán,Héctor Hernández-Escoto
DOI: https://doi.org/10.1007/s13399-019-00574-3
IF: 4.05
2019-12-24
Biomass Conversion and Biorefinery
Abstract:In this work, alkaline hydrogen peroxide pretreatment (AHP), at low concentrations of chemical reagents and mild temperature, on sugarcane bagasse was evaluated for production of bioethanol via enzymatic hydrolysis using Cellic<sup>®</sup> CTec3 from Novozymes<sup>®</sup> and fermentation using <em class="EmphasisTypeItalic">Saccharomyces cerevisiae</em> wild-type strain AR5. Sodium hydroxide NaOH and calcium hydroxide Ca(OH)<sub>2</sub> as alkaline reagents were used and combined with hydrogen peroxide (H<sub>2</sub>O<sub>2</sub>) as oxidant reagent. AHP pretreatment with NaOH increased cellulose content up to 78% and holocellulose content up to 90%, resulting in 35% more of cellulose and holocellulose contents compared with AHP pretreatment with Ca(OH)<sub>2</sub>. Results of enzymatic hydrolysis of substrate coming from pretreatment with NaOH achieved high holocellulose-to-reducing sugar yield up to 81% in 7 h of reaction time, 30% higher production than using Ca(OH)<sub>2</sub>. Besides, for the fermentation process, the necessity and effectiveness of removing remaining solids after enzymatic hydrolysis are not reported in the open literature. Finally, the maximum theoretical yield (95%) was obtained using bothalkaline reagents for the fermentation experiments, producing a maximum ethanol concentration of 39 g/L when AHP pretreatment with NaOH was used, as well the ethanol production balances of 28.9% and 19.1%, were achieved according to the pretreatments with NaOH and Ca(OH)<sub>2</sub>, respectively.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?