Abstract:In order to accomplish the calibration and validation (Cal/Val) of altimeters, the Wanshan calibration site (WSCS) has been used as a calibration site for satellite altimeters since its completion in August 2019. In this paper, we introduced the WSCS and the dedicated equipment including permanent GNSS reference stations (PGSs), acoustic tide gauges (ATGs), and dedicated GNSS buoys (DGB), etc. placed on Zhi'wan, Wai'ling'ding, Dan'gan, and Miao'Wan islands of the WSCS. The PGSs data of Zhi'wan and Wai'ling'ding islands were processed and analyzed using the GAMIT/GLOBK (Version 10.7) and Hector (Version 1.9) software to define the datum for Cal/Val of altimeters in WSCS. The DGB was used to transfer the datum from the PGSs to the ATGs of Zhi'wan, Wai'ling'ding, and Dan'gan islands. Separately, the tidal and mean sea surface (MSS) corrections are needed in the Cal/Val of altimeters. We evaluated the global/regional tide models of FES2014, HAMTIDE12, DTU16, NAO99jb, GOT4.10, and EOT20 using the three in situ tide gauge data of WSCS and Hong Kong tide gauge data (No. B329) derived from the Global Sea Level Observing System. The HAMTIDE12 tide model was chosen to be the most accurate one to maintain the tidal difference between the locations of the ATGs and the altimeter footprints. To establish the sea surface connections between the ATGs and the altimeter footprints, a GPS towing body and a highly accurate ship-based SSH measurement system (HASMS) were used to measure the sea surface of this area in 2018 and 2022, respectively. The global/regional mean sea surface (MSS) models of DTU 2021, EGM 2008 (mean dynamic topography minus by CLS_MDT_2018), and CLS2015 were accurately evaluated using the in situ measured data and HY-2A altimeter, and the CLS2015 MSS model was used for Cal/Val of altimeters in WSCS. The data collected by the equipment of WSCS, related auxiliary models mentioned above, and the sea level data of the hydrological station placed on Dan'gan island were used to accomplish the Cal/Val of HY-2B, HY-2C, Jason-3, and Sentinel-3A (S3A) altimeters. The bias of HY-2B (Pass No. 375) was −16.7 ± 45.2 mm, with a drift of 0.5 mm/year. The HY-2C biases were −18.9 ± 48.0 mm with drifts of 0.0 mm/year and −5.6 ± 49.3 mm with −0.3 mm/year drifts for Pass No. 170 and 185, respectively. The Jason-3 bias was −4.1 ± 78.7 mm for Pass No. 153 and −25.8 ± 85.5 mm for Pass No. 012 after it has changed its orbits since April 2022, respectively. The biases of S3A were determined to be −16.5 ± 46.3 mm with a drift of −0.6 mm/year and −9.8 ± 30.1 mm with a drift of 0.5 mm/year for Pass No. 260 and 309, respectively. The calibration results show that the WSCS can commercialize the satellite altimeter calibration. We also discussed the calibration potential for a wide swath satellite altimeter of WSCS.

Analysis of vertical deflections determined from one cycle of simulated SWOT wide-swath altimeter data

Analysing the impact of SWOT observation errors on marine gravity recovery

A New Wind Speed Retrieval Method for an Ocean Surface Using the Waveform Width of a Laser Altimeter

Seamount detection using SWOT-derived vertical gravity gradient: advancements and challenges

High Precision Vertical Deflection over China Marginal Sea and Global Sea Derived from Multi-satellite Altimeter

1′× 1′Vertical Deflection and Its Precision Evaluation on China West Pacific Ocean Region

On Deflections of Vertical Determined From HY-2A/GM Altimetry Data in the Bay of Bengal

Accuracy and Resolution of SWOT Altimetry: Foundation Seamounts

Advances in Surface Water and Ocean Topography for Fine-Scale Eddy Identification from Altimeter Sea Surface Height Merging Maps

Validation of Multisource Altimeter SWH Measurements for Climate Data Analysis in China's Offshore Waters

Accuracy Evaluation of Altimeter-Derived Gravity Field Models in Offshore and Coastal Regions of China

The Effect of Spatially Correlated Errors on Sea Surface Height Retrieval from SWOT Altimetry

Establishment of mean sea surface height model for Zhejiang coastal areas based on satellite altimetry technique

An Unbiased Multiparameter Algorithm of Retrieving Sea Surface Height Using Coastal GNSS Reflectometry

Producing SWOT measurements with a multiscale data assimilation system during the prelaunch field campaign

Performance of Tiangong-2 Interferometric Imaging Radar Altimeter on Marine Gravity Recovery Over the South China Sea

Altimeter Calibrations in the Preliminary Four Years' Operation of Wanshan Calibration Site

Estimating the True Spatial Resolution of Satellite Altimeter-Derived Gravity Field Models with Shipborne Data in the South China Sea

An Observing System Simulation Experiment for Ocean State Estimation to Assess the Performance of the SWOT Mission: Part 1—A Twin Experiment

Steric heights of submesoscale processes and internal gravity waves in the subtropical northwestern Pacific and northern South China Sea as revealed by moored observations

Block-Circulant Approximation of the Precision Matrix for Assimilating SWOT Altimetry Data