Abstract:Flame retardant rubber foams of ethylene vinyl acetate (EVA)/natural rubber (NR)/layered silicate blends filled with silicon dioxide (SiO 2 ) were prepared by using azodicarbonamide (ADC) as a blowing agent. Specifically, SiO 2 was added in EVA/NR blend nanocomposites to produce good flame retardant foams. The properties of EVA/NR blend nanocomposite foams with different SiO 2 loading (0, 20, 30, 40 parts per hundred rubber, phr) were investigated through transmission electron microscopy (TEM), scanning electron microscopy (SEM), rheological property test, mechanical property measurement, flammability tests, thermogravimetry analysis (TGA) and pyrolysis-gas chromatography-mass spectrometry (Pyrolysis-GC-MS). Compared with the simple EVA/NR blend nanocomposite, the added SiO 2 increased the blend compatibility between EVA and NR phases and melt strength/viscosity of the EVA/NR blend nanocomposites, thus promoting cellular structure of the EVA/NR nanocomposite foams. Increasing SiO 2 loading resulted in higher cell density, smaller cell size, and lower volume of void. These improvements caused higher strength and elastomeric recovery. The LOI test results showed that flame retardancy of the EVA/NR blend nanocomposite foams increased at higher SiO 2 loading as a result of formation of insulation silicon dioxide-based char. TGA and pyrolysis-GC-MS analyses also validated the finding that the silicon dioxide-based char in the foamed samples containing higher SiO 2 loading was more effective on improving thermal stability, which was responsible for lower material combustibility and better flame retardancy. Based on our finding, it was concluded that a good flame retardant EVA/NR blend nanocomposite foam with the best improvement in strength and elastomeric recovery was achieved when combined with 40 phr SiO 2 .

Effect of natural basalt fiber for EVA composites with nickel alginate‐brucite based flame retardant on improving fire safety and mechanical properties

Aluminum phosphate modified brucite and its flame retardant and smoke suppression performance on ethylene‐vinyl acetate resin

Basalt Fiber Modified Ethylene Vinyl Acetate/Magnesium Hydroxide Composites with Balanced Flame Retardancy and Improved Mechanical Properties

Controllable Layer-By-Layer Assembly Based On Brucite And Alginates With The Assistance Of Spray Drying And Flame Retardancy Influenced By Gradients Of Alginates

Flame retardant synergism of rubber and Mg(OH)2 in EVA composites

Controllable fabrication of zinc borate hierarchical nanostructure on brucite surface for enhanced mechanical properties and flame retardant behaviors

Effect Of Rubbers On The Flame Retardancy Of Eva/Ultrafine Fully Vulcanized Powdered Rubber/Nanomagnesium Hydroxide Ternary Composites

Basalt Fiber-Based Flame Retardant Epoxy Composites: Preparation, Thermal Properties, and Flame Retardancy

PA-6 and EVA alloy/clay nanocomposites as char forming agents in poly(propylene) intumescent formulations

Flammability Of Eva/Ifr (App/Per/Zb System) And Eva/Ifr/Synergist (Caco3, Ng, And Eg) Composites

Simultaneously improving mechanical strength, hydrophobic property and flame retardancy of ethylene vinyl acetate copolymer/intumescent flame retardant/FeOOH by introducing modified fumed silica

Preparation and properties of flame-retardant neutron shielding material based on EVA polymer reinforced by radiation modification

Highly Efficient Composite Flame Retardants for Improving the Flame Retardancy, Thermal Stability, Smoke Suppression, and Mechanical Properties of EVA

Enhancement on Physical Properties of Flame Retarded Ethylene-Vinyl Acetate Copolymer/ferric Pyrophosphate Composites Through Electron Beam Irradiation

Enhancing cellular structure, mechanical properties, thermal stability and flame retardation of EVA/NR blend nanocomposite foams by silicon dioxide-based flame retardant

A green, effective, and synergistic flame retardant for poly(ethylene-co-vinyl acetate) resin

Enhancement of thermal stability and flame retardancy of ethylene vinyl acetate/magnesium hydroxide composite by carbon black

Enhanced Mechanical Property and Flame Retardancy of Halogen-Free Pe/Eva Composites Through Crosslinking and Carbon Fiber Inclusion

The Impact of Metal Oxides on the Combustion Behavior of Ethylene-Vinyl Acetate Coploymers Containing an Intumenscent Flame Retardant

A novel EVA-based composite via ceramization toward excellent flame retardance performance and high-temperature resistance

Reinforcing Condensed Phase Flame Retardancy through Surface Migration of Brucite@Zinc Borate-Incorporated Systems