Abstract:Purpose The present paper aims to systematically investigate the influence of building orientations (0°, 15°, 30°, 45°, 60°, 75°) and heat treatment processes on the macro-/micro-structural, mechanical and electrochemical behaviors of selective laser melting (SLM) prepared AlSi10Mg alloy parts. Design/methodology/approach AlSi10Mg samples were produced by the SLM method using standard processing parameters at 0°, 15°, 30°, 45°, 60° and 75° building angles. The effects of building orientations on the physical, mechanical and electrochemical properties of the alloy were investigated. Findings With the increase in the building orientation from 15° to 75°, the structural defects were found reducing. The effect of step size of inclined geometries was found to significantly influence the mechanical and electrochemical properties of the AlSi10Mg samples. Tensile strength for samples fabricated at lower angles (0°, 15°, 30°) reported a drop of approximately 11% than SLM 0° samples. Moreover, the tensile strength was found to decrease from 412.35 ± 9.568 MPa for the as-built samples to 290.48 ± 12.658 MPa, whereas the fracture strain increases from 3.32 ± 0.56% to 5.6 ± 0.6% when the as-built sample was treated with T6 treatment. This study indicates that the microstructure and mechanical properties of SLM-processed AlSi10Mg alloy can be tailored by a suitable heat treatment or building angle. Originality/value Microstructural and mechanical behavior of horizontal or vertically built SLM components have already been demonstrated several times. However, the influence of different building orientations, such as 0°, 15°, 30°, 45°, 60°, 75°, has not been explored in-depth, particularly on corrosion and general mechanical performance. As a result, this work may be of significant relevance to academics and designers, given the varying orientation of internal component of SLM structures.

On the Effect of Building Direction on the Microstructure and Grain Morphology of a Selective Laser Melted Maraging Stainless Steel

Effect of building direction on microstructure and mechanical properties of SLM TC4 alloy

Studying the Microstructural Effect of Selective Laser Melting and Electropolishing on the Performance of Maraging Steel

Effects of building direction and heat treatment on the local mechanical properties of direct metal laser sintered 15-5 PH stainless steel

Effect of building orientations and heat treatments on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties, fracture mechanism and corrosion behavior

Effect of Thermal Cycle on Microstructure Evolution and Mechanical Properties of Selective Laser Melted Low-Alloy Steel

Selective laser melting processing of 316L stainless steel: effect of microstructural differences along building direction on corrosion behavior

The Effect of Building Direction on Microstructure and Microhardness during Selective Laser Melting of Ti6Al4V Titanium Alloy

Effect of selective laser melting process parameters on the microstructure and properties of a precipitation hardening stainless steel

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Effect of heat treatment on microstructure and mechanical properties of Fe–Cr–Ni–Co–Mo maraging stainless steel produced by selective laser melting

Microstructural Evolution of a FeCo15Cr14Ni4Mo3 Maraging Steel with High Ductility Prepared by Selective Laser Melting

Densification Behavior and Influence of Building Direction on High Anisotropy in Selective Laser Melting of High-Strength 18Ni-Co-Mo-Ti Maraging Steel

TEM Observations of Variation of Dislocation Cell Structures along the Building Direction in SLM-316L Stainless Steel

Solidification Characteristics of Laser-Powder Bed Fused AlSi10Mg: Role of Building Direction

Effects of building direction and defect sensitivity on the fatigue behavior of additively manufactured H13 tool steel

Effect of construction angles on microstructure and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting

Effect of Annealing on Microstructure and Tensile Properties of Selective Laser Melting MAR-M509 Superalloy

Effect of building direction on the mechanical anisotropy of biocompatible Co–Cr–Mo alloy manufactured by selective laser melting process

Effect of building directions on the surface roughness, microstructure, and tribological properties of selective laser melted Inconel 625

A comprehensive study on microstructure and tensile behaviour of a selectively laser melted stainless steel