Abstract:Efficient and safe cleanup for the high-viscosity heavy oil spill has been a worldwide challenge due to its sluggish flowability, while classic absorption methods by electric/solar heating are seriously limited by low efficiency and high fire hazards during heating of highly flammable oil. Facing this dilemma, we reported a novel flame-retardant photothermal conversion nanocoating to endow commercial foams with highly efficient and safe heavy oil cleanup absorption. This multifunctional nanocoating consisting of nano-Fe3O4 and reduced graphene oxide (rGO) that both showed photothermal conversion ability and non-flammable nature can be firmly deposited on the polymer foam skeletons via facile coprecipitation and dip-coating processes. The composite foam showed a tough morphology with high hydrophobicity and low density, thus leading to selective high absorption for various oils and organic solvents. Due to the double photothermal conversion effects of nano-Fe3O4 and rGO, the temperature of the foam can be rapidly heated at a rate of ∼103.5 °C/min (the fastest rate ever) under 1 sun irradiation. Consequently, the foam with a high absorption capacity of 75.1 times its weight demonstrated a rapid absorption rate of 9000 g m–2 min–1 for large-viscosity oil under 1 sun irradiation, which was 3 times faster than previously reported. Furthermore, benefitting from high flame retardancy, elasticity, and magnetism, the foam can be safely and repeatedly used for magnetically controllable oil cleanup absorption, which effectively avoids oil spill hazards.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22596?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22596</a>.Fe element mapping for the Fe3O4/MF and rGO/Fe3O4/MF foams; pore-size distributions of the MF, Fe3O4/MF, and rGO/Fe3O4/MF foams calculated by the mercury intrusion method; deformation recovery and strength recovery at different compressing–releasing cyclic processes for the MF and Fe3O4/MF foams; digital photographs of the recovery process for n-hexane and dichloromethane (dyed with Sudan III) absorbed in the rGO/Fe3O4/MF foam by compression; reflectance and transmission spectra for the rGO/Fe3O4/MF foam; schematic illustration of the solar steam generation experimental setup and solar vapor generator floating on ethanol in a beaker wrapped with thermal insulation materials; absorption process of the rGO/Fe3O4/MF foam for dichloromethane (dyed with Sudan III), water contact angle values of the rGO/Fe3O4/MF foam, and absorption capacities of the rGO/Fe3O4/MF foam for various oils and organic solvents; digital photographs of the removal process of n-hexane (dyed with Sudan III) floating on water and dichloromethane (dyed with Sudan III) sinking in water using the rGO/Fe3O4/MF foam; continuous solar-assisted vacuum absorption equipment of the rGO/Fe3O4/MF foam and time-lapse photography illustrating the continuous oil absorption process; TG and DTG curves of different foams in the air atmosphere; basic properties of heavy crude oil; porous characteristics, strength recovery, deformation recovery, saturation magnetization (MS), electrical conductivity, and data from microcalorimetry tests; comparison of MF-based oil absorbents in the recent literature; and material cost for the rGO/Fe3O4/MF foam production (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22596/suppl_file/am0c22596_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Low optical dosage heating-reduced viscosity for fast and large-scale cleanup of spilled crude oil by reduced graphene oxide melamine nanocomposite adsorbents

Solar Heating Assisted Rapid Cleanup of Viscous Crude Oil Spills Using Reduced Graphene Oxide-Coated Sponges

Multifunctional Photothermal Conversion Nanocoatings Toward Highly Efficient and Safe High-Viscosity Oil Cleanup Absorption

Solar-heated melamine sponge decorated with Fe3O4 for continuous recovery of viscous crude oil

Multifunctional hydrophobic bio-based foam toward highly efficient photothermal cleanup of high-viscosity crude oil spills, oil-water separation and aqueous organic pollutant elimination

Solar-Assisted Fast Cleanup Of Heavy Oil Spills Using A Photothermal Sponge

Natural Sponge-Like Wood-Derived Aerogel for Solar-Assisted Adsorption and Recovery of High-Viscous Crude Oil

Solar-assisted high-efficient cleanup of viscous crude oil spill using an ink-modified plant fiber sponge

Bioinspired Solar‐Heated Carbon Absorbent for Efficient Cleanup of Highly Viscous Crude Oil

Solar-driven self-heating sponges for highly efficient crude oil spill remediation

Mechanically robust polybenzoxazine/reduced graphene oxide wrapped-cellulose sponge towards highly efficient oil/water separation, and solar-driven for cleaning up crude oil

Multifunctional magnetic sponge with outstanding solar/electro-thermal performance for high-efficiency and all-day continuous cleanup of crude oil spills

Solar-driven, highly-efficient, and environmentally-friendly oil spill cleanup by a superelastic photothermal thermoplastic polyurethane monolith with aligned channels

Solar-assisted self-heating Ti3C2Tx-decorated wood aerogel for adsorption and recovery of highly viscous crude oil

Efficient solar-driven crude oil cleanup via graphene/cellulose aerogel with radial and centrosymmetric design

Robust 3D porous superhydrophobic foam with excellent photothermal effect and Joule heating effect for efficient all-weather cleanup of highly viscous crude oil spills

Photothermal and Joule heating-assisted thermal management sponge for efficient cleanup of highly viscous crude oil

Eco-friendly, stimuli-responsive sponge with magneto-photothermal effect for efficient and continuous cleanup of viscous crude oils

Research progress in solar-assisted crude oil absorbing materials

Solar-assisted isotropically thermoconductive sponge for highly viscous crude oil spill remediation

Solar Activated Crude Oil Cleanup Using Net-Shape-formed Ultralight Graphene Tiles