Abstract:Aqueous zinc (Zn)-ion batteries (AZIBs) have been paid attention to as safe, economical, and high-energy-density storages through multiple electron transfer. Although conventional alkaline solution-based AZIBs are primary batteries, recent studies demonstrated the reversible Zn 2+ deposition and stripping processes enabled in mildly acidic solutions. It promises the development of rechargeable AZIBs and viable applications for energy storage systems (ESSs). However, metallic Zn employed as the negative electrode has suffered from severe corrosion and precipitation of electrolyte salts in this low pH condition. The Zn electrode undergoes a hydrogen evolution reaction (HER) as Zn 2+ is dissolved from the Zn surface. The corrosion leads to a pH rise, precipitating electrolyte salt as zinc hydroxide forms. For example, hexagonal plates of zinc hydroxide sulfate hydrate (Zn 4 SO 4 (OH) 6 ∙xH 2 O, indicated as ZHS) grew on the Zn electrode in 1 M ZnSO 4 solution when pH approached ~5.4. The insulating and randomly oriented ZHS increased the surface resistance and caused the non-uniform Zn deposition. These challenges are mitigated by adding organic acid to the 1 M ZnSO 4 solution. As the HER raised pH, the acid was promptly deprotonated, then coordinated with Zn 2+ . This process caused the thin film formation consisting of three-dimensional zinc glutarate. The zinc glutarate protected the Zn electrode and impeded the electrode corrosion and the ZHS precipitation. We demonstrated a uniform Zn plating and stripping process with 10 mM of organic acid in contrast with dendritic and dead Zn growth in the absence of the additive. Galvanostatic tests of symmetric Zn cells revealed over 1000 h cycles with the additives at a current density of 1 mA cm -2 and a limited capacity of 1 mAh cm -2 . In contrast, the Zn cells with the additive-free electrolyte solution exhibited 15 times lower cyclability as micron-scale ZHS plates covered the electrode surface. Our strategy using the cheap additives is feasible to use grid-scale ESSs and shows significantly improved cycling performances. I will present details of Zn surface reactions using organic acid additive and corresponding electrochemical performances in this presentation.

Effects of Crosslinker Concentration in Poly(Acrylic Acid)‐KOH Gel Electrolyte on Performance of Zinc‐Air Batteries

Cover Feature: Effects of Crosslinker Concentration in Poly(Acrylic Acid)‐KOH Gel Electrolyte on Performance of Zinc‐Air Batteries (Batteries & Supercaps 5/2020)

Poly(acrylic acid) Cross-Linked with Potassium As Gel Polymer Electrolyte in Small Zinc-Air Batteries

Enhancing Electrochemical Performance of Zinc-Air Batteries Using Freeze Crosslinked Carboxymethylcellulose-Chitosan Hydrogels as Electrolytes

Dual cross-linked hydrogel electrolyte modified by nonionic surfactant for flexible and rechargeable zinc-air battery

Activating the Intrinsic Zincophilicity of PAM Hydrogel to Stabilize the Metal‐Electrolyte Dynamic Interface for Stable and Long‐Life Zinc Metal Batteries

Suppression of Zinc Dendrite Growth by Enhanced Polyacrylamide Gel Electrolytes in Zinc‐ion Battery

Properties of the PVA-VAVTD KOH Blend as a Gel Polymer Electrolyte for Zinc Batteries

Investigation of failure mechanism of rechargeable zinc–air batteries with poly(acrylic acid) alkaline gel electrolyte during discharge–charge cycles at different current densities

Aquatic Colloidal Graphene Gel Polymer Electrolyte for Flexible Rechargeable Zinc Air Batteries

Stabilizing Metallic Zn Electrode Using Organic Acid Additives in Aqueous Zinc-Ion Batteries

Gel Polymer Electrolytes for Zinc-Air Batteries Operating at Low Temperatures

Improvements and Challenges of Hydrogel Polymer Electrolytes for Advanced Zinc Anodes in Aqueous Zinc-Ion Batteries

Reshaping Zinc Plating/Stripping Behavior by Interfacial Water Bonding for High-Utilization-Rate Zinc Batteries

Improving diffusion kinetics of zinc ions/stabilizing zinc anode by molecular slip mechanism and anchoring effect in supramolecular zwitterionic hydrogels

Locking Water Molecules Loss of PAA Hydrogel for Flexible Zinc‐Air Battery with NaCl Doping

Modulation of hydrogel electrolyte enabling stable zinc metal anode

Aqueous Acidic Pectin‐based Solution as Electrolyte and Pretreatment Solution for Zinc Ion Battery Anodes

Low-Temperature Tolerant Poly(acrylic Acid) (PAA) Gel Polymer Electrolytes for Rechargeable Zinc-air Batteries

Molecular Crowding Agent Modified Polyanionic Gel Electrolyte for Zinc Ion Batteries Operating at 100 °C

Advancements in Gel Electrolytes for High-Performance Zinc–Air Batteries to Stabilize Zinc Anodes