Abstract:This study introduces a novel strategy to enhance the high-temperature electrical performance of the silicone elastomer (SE), while ensuring control over its thermal and mechanical properties for SiC device packaging insulation application. For the same, the ultra-low-content inorganic/organic SE nanocomposites are prepared and tested (at room temperature and 150 degrees C) by grafting polyhedral oligomeric silsesquioxane (POSS) nanofillers and doping organic semiconductors. It is found that grafting POSS nanofillers enhances the SE's thermal and mechanical properties. Moreover, doping the grafted SE with different organic semiconductors (ITIC, PCBM, and NTCDA) further improves its electrical properties and charge dynamics at 150 degrees C. The optimal doping content for ITIC, PCBM, and NTCDA is found to be 0.05, 0.10, and 0.15 wt%, respectively. Among these, NTCDA exhibits superior electrical performance at 150 degrees C. Particularly, compared to pure SE, NTCDA doping and POSS grafting reduce the electrical conductivity by an order of magnitude and increase the breakdown strength, charge hopping activation energy, and trap energy level by 65.5%, 0.20 eV and 0.73 eV, respectively. This study finds that organic semiconductors outperform nanostructures in inhibiting electron injection and immobilizing free electrons at high temperatures.Highlights Nano-POSS grafting enhances material properties by reinforced molecular chains. Charge dynamics is studied by space charge and current integrated charge at HT. Organic semiconductors improve electrical properties and charge dynamics at HT. Organic semiconductors outperform nanofillers in immobilizing electrons at HT. The ideal organic semiconductor doping level correlates with its energy gap. Energy band diagram illustrating potential charge transfer within the composite. image

Characteristics of dynamic resistance in a heavily doped silicon semiconductor resistor

Two Step Rapid Thermal Boron Diffusion Making Micro Resistor

Enhanced High-Temperature Electrical Properties and Charge Dynamics of Inorganic/organic Silicone Elastomer Nanocomposites Via Nanostructure Grafting and Molecular Trap Construction

Hopping Conduction in Partially Compensated Doped Silicon.

Establishment and Verification of Resistance Temperature Coefficient Model of P-type Non-Uniformly Doped Resistance

Characterizations on the Doping of Single-Crystal Silicon Carbide

Temperature resistance coefficient of doped with rare earth elements nanostructured silicon films

Low temperature fired positive temperature coefficient resistors

Determination of Doping and Temperature Dependent Elastic Constants of Degenerately Doped Silicon from MEMS Resonators

DC resistance degradation of SrTiO 3 : The role of virtual‐cathode needles and oxygen bubbles

Dynamic NBTI characteristics of p-MOSFET with N-plasma SiON Gate Dielectric

Extending Electrical Resistivity Measurements in Micro-scratching of Silicon to Determine Thermal Conductivity of the Metallic Phase Si-II

Modulating Mechanism on the Temperature Dependent Resistivity of Ceramic Dielectrics and Its Advantage over Polymer Insulation

Analysis and optimization of transient heat dissipation characteristics of high power resistors with a sensible heat storage method

Temperature-dependent carrier transport behaviors in phosphorus-doped silicon nanocrystals/silicon carbide multilayers

DC Resistance Degradation of SrTiO$_3$: The Role of Virtual-Cathode Needles and Oxygen Bubbles

The Variable Thermal Sensitivity of Strontium-Lead Titanate Semiconducting Ceramics

Piezoresistive Thermal Characteristics of Aluminum-Doped P-Type 3C-Silicon Carbides

Nonlinear piezoresistive effect of 4H–SiC for applications of high temperature pressure sensors

Rapid conduction of NiO-based ceramic resistors: the competitive relationship between electron–hole exchange and screening effect

Insulator-to-metal transition in heavily Ti-doped silicon thin film