Abstract:During the past two decades, wearable devices have been broadly used for a variety of fields such as biomedical system, communication and microelectronics. The power system such as lithium-ion batteries is essential to the operation of wearable devices, which should adapt to irregular substrates and sustain complex deformations. A promising strategy is to fabricate high-performance energy storage devices in a fiber shape, e.g., fiber lithium-ion batteries (LIBs). These fiber LIBs with diameters ranging from tens to hundreds of micrometers can be readily integrated with human body and work stably under constant body motions. They can also be woven into breathable fabrics to satisfy the needs of wearable electronics. The key challenges facing fiber LIBs include effective loading of active materials on fiber electrodes, efficient charge transfer along fiber electrodes and interface stability of fiber electrodes under operation and deformation. Fiber electrodes are thus designed with hierarchical and aligned channels to effectively load active materials, so an effective electric field can be established between the fiber cathode and anode. Aligned carbon nanotubes (CNTs) can be made with conductive additives and active materials into fiber electrodes by a continuous spinning process. Conventional metal current collectors, binders and conductive agents are not required, and active materials may reach 90% of the electrode by weight. The resulting hierarchically helical CNT fiber electrode shows high flexibility, high strength, and high electrical conductivity. The flexural rigidity is as low as 10-7 nN/m(2), which is several orders of magnitude lower than those of ordinary synthetic fibers. The specific strength reaches 107 Nm/kg, which is higher than those of ordinary synthetic fibers. The conductivity reaches 10(4) S/cm, which can meet the needs of batteries. The aligned CNT composite fiber permits efficient electron transport, where the electrons hop among neighboring CNTs. Besides, due to the capillary force, the electrolyte can penetrate throughout the entire fiber via micrometer-sized and nanometer-sized channels, benefiting ion transport. The twisted CNT bundles firmly bind active materials and prevent their significant volume variations during charge and discharge processes. Therefore, the efficient conductive pathways can be maintained to deliver both high rate and cyclic stability. Fiber LIBs could be fabricated by assembling two fiber electrodes in parallel, twisting or coaxial structure. Gel electrolyte avoids the potential safety risks stemmed from liquid electrolytes. The continuously fiber LIBs show both high flexibility and energy storage capacity. After bending for 100000 cycles, the capacities have been well maintained, and the energy densities exceed 100 Wh/kg. Based on the similar strategy, a series of fiber energy storage devices such as supercapacitors, lithium-sulfur batteries, lithium-air batteries, zinc-ion batteries, zincair batteries and aluminum-air batteries, have been also produced. To summarize, fiber energy storage devices can be woven into flexible fabrics or integrated with energy harvesting devices to satisfy the next-generation electronics. Such a new strategy establishes an efficient avenue to particularly accelerate the development of wearable electronics in the future.

Cost-Effective Yarn-Shaped Lithium-Ion Battery with High Wearability

Advances in Wearable Fiber‐Shaped Lithium‐Ion Batteries

Waterproof and Tailorable Elastic Rechargeable Yarn Zinc Ion Batteries by a Cross-Linked Polyacrylamide Electrolyte

Research Progress of Fiber-Shaped Electrochemical Energy Storage Devices

A Superior Flame‐Resistant and Wide‐Temperature Adaptable Yarn Lithium‐Ion Battery with a Highly Conductive Ionogel Electrolyte

Realizing High‐Energy and Stable Wire‐Type Batteries with Flexible Lithium–Metal Composite Yarns

Weavable, Conductive Yarn-Based NiCo//Zn Textile Battery with High Energy Density and Rate Capability.

Realizing High Energy Density and Flexibility of Fabric Electrode through Hierarchical Structure Design

High-Performance and Ultraflexible Aqueous Rechargeable Lithium-Ion Batteries Developed by Constructing All Binder-free Electrode Materials

Twisted Fiber Batteries for Wearable Electronic Devices

Elastic and Wearable Wire‐Shaped Lithium‐Ion Battery with High Electrochemical Performance

Si@void@C Nanofibers Fabricated Using a Self-Powered Electrospinning System for Lithium-Ion Batteries

Nickel-Rich Cathode Yarn for Wearable Lithium-Ion Batteries

Stretchable Lithium‐Ion Batteries Enabled by Device‐Scaled Wavy Structure and Elastic‐Sticky Separator

Fiber-Shaped Lithium Ion Battery

Enhanced Stability-Based Hydroxymethyl Cellulose/Polyacrylamide Interpenetrating Dual Network Hydrogel Electrolyte for Flexible Yarn Zinc-Ion Batteries

An extremely safe and wearable solid-state zinc ion battery based on a hierarchical structured polymer electrolyte

Flexible Phosphorus Doped Carbon Nanosheets/nanofibers: Electrospun Preparation and Enhanced Li-storage Properties As Free-Standing Anodes for Lithium Ion Batteries

Flexible Lithium-Ion Batteries with High Areal Capacity Enabled by Smart Conductive Textiles

Highly‐Safe and Ultra‐Stable All‐Flexible Gel Polymer Lithium Ion Batteries Aiming for Scalable Applications

Back Cover: Elastic and Wearable Wire-Shaped Lithium-Ion Battery with High Electrochemical Performance (Angew. Chem. Int. Ed. 30/2014)