The Electrostatic Double Layer of Pt/Water Interfaces From First Principles Molecular Dynamics

Clotilde Silvia Cucinotta,Stefano Sanvito,Pietro Ballone

DOI: https://doi.org/10.1149/ma2013-02/15/1457

2013-10-27

ECS Meeting Abstracts

Abstract:Abstract not Available.

What problem does this paper attempt to address?

The nanoscale structure of the Pt-water double layer under bias revealed

Rémi Khatib,Ashwinee Kumar,Stefano Sanvito,Marialore Sulpizi,Clotilde S. Cucinotta

DOI: https://doi.org/10.1016/j.electacta.2021.138875

IF: 6.6

2021-09-01

Electrochimica Acta

Abstract:Atomistic mass and charge distribution at electrified interfaces play a key role in electrochemical phenomena of huge technological relevance for energy production and conversion. However, in spite of its importance, the structure of the double layer at the nanoscale is still to a large extent unknown, even for Pt-water, the most fundamental electrochemical interface. Using a new, general ab initio methodology to model charged electrodes, we simulate the atomistic structure of the Pt-water double layer and its response to an applied potential, in realistic solution conditions. We evaluate the interface capacitance and the absolute electrode potential for three states of charge of the electrode. We reveal that electrode polarisation induces interfacial electronic charge spillover and oscillation, and changes the surface coverage of the first adsorbed water layer. Since the molecules in this layer are all found to be equally charged, the interface dipole is strongly affected by such change of coverage, while water reorientation becomes relevant only from the second water layer. Our findings will be essential to develop highly realistic models for catalytic processes at the Pt-water interface.

electrochemistry
Revisiting the Electrified Pt(111)/Water Interfaces through an Affordable Double-Reference ab-initio Approach

Jack Jon Hinsch,Assil Bouzid,Jordan Clive Barker,Jessica Jein White,Fabien Mortier,Huijun Zhao,Yun Wang

DOI: https://doi.org/10.1021/acs.jpcc.3c05425

2023-09-27

Abstract:The electrified solid-liquid interface plays an essential role in many renewable energy-related applications, including hydrogen production and utilization. Limitations in computational modelling of the electrified solid-liquid interface have held back the understanding of its properties at the atomic-scale level. In this study, we applied the grand canonical density functional theory (GC-DFT) combined with a hybrid implicit/explicit solvation model to reinvestigate the widely studied electrified platinum-water interface affordably. The calculated double layer capacitances of the Pt(111)-water interface over the applied bias potential closely match the experimental and previous theoretical data from expensive ab-initio molecular dynamics simulations. The structural analysis of the interface models reveals that the applied bias potential can significantly affect the Pt(111)-water atomic interface configurations. The orientation of the water molecules next to the Pt(111) surface is vital for correctly describing the potential of zero charge (PZC) and capacitance. Additionally, the GC-DFT results confirm that the absorption of the hydrogen atom under applied bias potential can significantly affect the electrified interfacial properties. The presented affordable GC-DFT approach, therefore, offers an efficient and accurate means to enhance the understanding of electrified solid-liquid interfaces.

Materials Science
The Water-Amorphous Silica Interface: Analysis Of The Stern Layer And Surface Conduction

Hui Zhang,Ali A Hassanali,Yun Kyung Shin,Chris Knight,Sherwin J Singer

DOI: https://doi.org/10.1063/1.3510536

2011-01-01

Abstract:To explain why dynamical properties of an aqueous electrolyte near a charged surface seem to be governed by a surface charge less than the actual one, the canonical Stern model supposes an interfacial layer of ions and immobile fluid. However, large ion mobilities within the Stern layer are needed to reconcile the Stern model with surface conduction measurements. Modeling the aqueous electrolyte-amorphous silica interface at typical charge densities, a prototypical double layer system, the flow velocity does not vanish until right at the surface. The Stern model is a good effective model away from the surface, but cannot be taken literally near the surface. Indeed, simulations show no ion mobility where water is immobile, nor is such mobility necessary since the surface conductivity in the simulations is comparable to experimental values. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3510536]
Thermodynamic Description of Interfaces Applying the 2PT Method on ReaxFF Molecular Dynamics Simulations

Christoph K. Jung,Laura Braunwarth,Andrey Sinyavskiy,Timo Jacob

DOI: https://doi.org/10.1021/acs.jpcc.1c07327

2021-11-01

The Journal of Physical Chemistry C

Abstract:The interface between liquid water and the Pt(111) metal surface is characterized structurally and thermodynamically via reactive MD simulations within the ReaxFF framework. The formation of a distinct buckled adsorbate layer and subsequent wetting layers is tracked via the course of the water’s density and the distribution of the H2O molecules with increasing distance to the metal surface. Hereby, also the two-phase thermodynamics (2PT) method has been utilized for studying the course of entropy as well as the translational, rotational, and vibrational entropic contributions throughout the Pt(111)|H2O interface. A significant reduction of the entropy compared to the bulk value is observed in the adsorbate layer (S = 31.05 ± 2.48 J/mol K) along with a density of 3.26 ± 0.06 g/cm3. The O–O interlayer distribution allows for direct tracing of the water ordering and a quantified comparison to the ideal hexagonal adlayer. While the adsorbate layer at the Pt surface shows the occurrence of hexagonal motifs, this near-order is already weakened in the wetting layers. Bulk behavior is reached at 15 Å distance from the Pt(111) metal. Introducing an electric field of 0.1 V/Å prolongs the ordering effect of the metal surface into the liquid water.
Water Structures and Anisotropic Dynamics at Pt(211)/Water Interface Revealed by Machine Learning Molecular Dynamics

Fei-Teng Wang,Xiandong Liu,Jun Cheng

DOI: https://doi.org/10.1088/2752-5724/ad7619

2024-09-04

Materials Futures

Abstract:Water molecules at solid-liquid interfaces play a pivotal role in governing interfacial phenomena that underpin electrochemical and catalytic processes. The organization and behavior of these interfacial water molecules can significantly influence the solvation of ions, the adsorption of reactants, and the kinetics of electrochemical reactions. The stepped structure of Pt surfaces can alter the properties of the interfacial water, thereby modulating the interfacial environment and the resulting surface reactivity. Revealing the in situ details of water structures at these stepped Pt/water interfaces is crucial for understanding the fundamental mechanisms that drive diverse applications in energy conversion and material science. In this work, we have developed a machine learning potential for the Pt(211)/water interface and performed machine learning molecular dynamics simulations. Our findings reveal distinct types of chemisorbed and physisorbed water molecules within the adsorbed layer. Importantly, we identified three unique water pairs that were not observed in the basal plane/water interfaces, which may serve as key precursors for water dissociation. These interfacial water structures contribute to the anisotropic dynamics of the adsorbed water layer. Our study provides molecular-level insights into the anisotropic nature of water behavior at stepped Pt/water interfaces, which can influence the reorientation and distribution of intermediates, molecules, and ions - crucial aspects for understanding electrochemical and catalytic processes.
Insight into the interface between Fe$_3$O$_4$(001) surface and water overlayers through multiscale molecular dynamics simulations

Hongsheng Liu,Enrico Bianchetti,Paulo Siani,Cristiana Di Valentin

DOI: https://doi.org/10.48550/arXiv.2003.01021

2020-03-02

Materials Science

Abstract:In this work we investigate the Fe$_3$O$_4$(001) surface/water interface by combining several theoretical approaches, ranging from a hybrid functional method (HSE06) to density-functional tight-binding (DFTB) to molecular mechanics (MM). First, we assess the accuracy of the DFTB method to reproduce correctly HSE06 results on structural details and energetics and available experimental data for the adsorption of isolated water, dimers, trimers, etc. up to a water monolayer. Secondly, we build two possible configurations of a second and a third overlayer and perform molecular dynamics simulations with DFTB, monitoring the water orientation, the H-bond network, and ordered water structures formation. To make our models more realistic, we then build a 12-nm thick water multilayer on top of the Fe$_3$O$_4$(001) surface slab model, which we investigate through MM molecular dynamics. The water layers structuring, revealed by the analysis of the atomic positions from a long MM-MD run for this large MM model, extends up to about 6-7 {\AA} and nicely compares with that observed for a water trilayer model. However, MM and DFTB MD simulations show some discrepancy due to the poor description of the Fe--OH2 distance in MM that calls for further work in the parametrization of the model.
Autocatalytic and cooperatively-stabilized dissociation of water on a stepped platinum surface

Davide Donadio,Luca M. Ghiringhelli,Luigi Delle Site

DOI: https://doi.org/10.1021/ja308899g

2012-11-13

Abstract:Water-metal interfaces are ubiquitous and play a key role in many chemical processes, from catalysis to corrosion. Whereas water adlayers on atomically flat transition metal surfaces have been investigated in depth, little is known about the chemistry of water on stepped surfaces, commonly occurring in realistic situations. Using first-principles simulations we study the adsorption of water on a stepped platinum surface. We find that water adsorbs preferentially at the step edge, forming linear clusters or chains, stabilized by the cooperative effect of chemical bonds with the substrate and hydrogen bonds. In contrast with flat Pt, at steps water molecules dissociate forming mixed hydroxyl/water structures, through an autocatalytic mechanism promoted by hydrogen bonding. Nuclear quantum effects contribute to stabilize partially dissociated cluster and chains. Together with the recently demonstrated attitude of water chains adsorbed on stepped Pt surfaces to transfer protons via thermally activated hopping, these findings candidate these systems as viable proton wires.

Materials Science,Chemical Physics
Hybrid Molecular Dynamics and First-Principles Study on the Work Function of a Pt(111) Electrode Immersed in Aqueous Solution at Room Temperature

Sai Duan,Xin Xu,Zhong-Qun Tian,Yi Luo

DOI: https://doi.org/10.1103/physrevb.86.045450

IF: 3.7

2012-01-01

Physical Review B

Abstract:With a combined molecular dynamics simulation and first-principles calculations, we have investigated a metal surface immersed in aqueous solution at room temperature using a Pt(111) electrode as an example. With the inclusion of thermal average effects at room temperature, the calculated averaged work function is found to be in good agreement with the experimental measurements. The electron redistribution at the interface of the topmost Pt(111) slab layer and the first water layer plays an important role in controlling the work function. A broad distribution of calculated work functions caused by the thermal motions of the dipolar solvents is obtained from statistical sampling, which implies that the chemical reactivity of a metal electrode in aqueous solution is a dynamic property at least in the nanoscale. Such a microscopic understanding helps to understand the behavior of complex electrochemical double layers.
Structural characterizations of water-metal interfaces

Kevin Ryczko,Isaac Tamblyn

DOI: https://doi.org/10.1103/PhysRevB.96.064104

2017-06-24

Abstract:We analyze and compare the structural, dynamical, and electronic properties of liquid water next to prototypical metals including Pt, graphite, and graphene. Our results are built on Born-Oppenheimer molecular dynamics (BOMD) generated using density functional theory (DFT) which explicitly include van der Waals (vdW) interactions within a first principles approach. All calculations reported use large simulation cells, allowing for an accurate treatment of the water-electrode interfaces. We have included vdW interactions through the use of the optB86b-vdW exchange correlation functional. Comparisons with the Perdew-Burke-Ernzerhof (PBE) exchange correlation functional are also shown. We find an initial peak, due to chemisorption, in the density profile of the liquid water-Pt interface not seen in the liquid water-graphite interface, liquid water-graphene interface, nor interfaces studied previously. To further investigate this chemisorption peak, we also report differences in the electronic structure of single water molecules on both Pt and graphite surfaces. We find that a covalent bond forms between the single water molecule and the Pt surface, but not between the single water molecule and the graphite surface. We also discuss the effects that defects and dopants in the graphite and graphene surfaces have on the structure and dynamics of liquid water.

Materials Science
Theoretical Modeling of Electrode/electrolyte Interface from First-Principles Periodic Continuum Solvation Method

Zhi-Pan Liu

DOI: https://doi.org/10.1016/j.cattod.2012.04.055

IF: 5.3

2012-01-01

Catalysis Today

Abstract:It has been a long challenge to understand the equilibrium and the dynamic phenomena (e.g. chemical reactions) at the electrode/electrolyte interface in a unified theoretical framework. Here periodic first-principles calculations integrated with modified-Poisson–Boltzmann electrostatics are utilized to provide the atomic level insight into the nature of electrochemical double layer and the catalytic reaction at the interface. The double layer properties of a series of metal electrodes and CO-covered Pt electrode, such as the potential of zero charge and the differential capacitance, are calculated from theory and a good agreement between theoretical values and experimental data is achieved. The theoretical method is also applied to understand the mechanism of CO electrooxidation on Pt. By comparing CO+O and CO+OH reaction channels, we show that CO+OH is the major mechanism for CO electrooxidation. It is observed that the barriers of these surface association reactions are weakly dependent on the potential. The theoretical results presented here demonstrate that first-principles periodic continuum solvation method is a practical and general-purpose theoretical tool for studying electrochemical phenomena occurring at the electrode/electrolyte interface.
Room temperature structure and energetics of water-hydroxyl layers on Pt(111)

August E. G. Mikkelsen,Henrik H. Kristoffersen,Jakob Schiøtz,Tejs Vegge,Heine A. Hansen,Karsten W. Jacobsen

DOI: https://doi.org/10.1039/D2CP00190J

2021-12-16

Abstract:The interactions between water and hydroxyl species on Pt(111) surfaces have been intensely investigated due to their importance to fuel cell electrocatalysis. Here we present a room temperature molecular dynamics study of their structure and energetics using an ensemble of neural network potentials, which allow us to obtain unprecedented statistical sampling. We first study the energetics of hydroxyl formation, where we find a near-linear adsorption energy profile, which exhibits a soft and gradual increase in the differential adsorption energy at high hydroxyl coverages. This is strikingly different from the predictions of the conventional bilayer model, which displays a kink at 1/3ML OH coverage indicating a sizeable jump in differential adsorption energy, but within the statistical uncertainty of previously reported ab initio molecular dynamics studies. We then analyze the structure of the interface, where we provide evidence for the water-OH/Pt(111) interface being hydrophobic at high hydroxyl coverages. We furthermore explain the observed adsorption energetics by analyzing the hydrogen bonding in the water-hydroxyl adlayers, where we argue that the increase in differential adsorption energy at high OH coverage can be explained by a reduction in the number of hydrogen bonds from the adsorbed water molecules to the hydroxyls.

Materials Science
First-principles molecular dynamics simulations at solid-liquid interfaces with a continuum solvent

Veronica M. Sanchez,Mariela Sued,Damian A. Scherlis

DOI: https://doi.org/10.1063/1.3254385

2009-05-01

Abstract:Continuum solvent models have become a standard technique in the context of electronic structure calculations, yet, no implementations have been reported capable to perform molecular dynamics at solid-liquid interfaces. We propose here such a continuum approach in a DFT framework, using plane-waves basis sets and periodic boundary conditions. Our work stems from a recent model designed for Car-Parrinello simulations of quantum solutes in a dielectric medium [J. Chem. Phys. 124, 74103 (2006)], for which the permittivity of the solvent is defined as a function of the electronic density of the solute. This strategy turns out to be inadequate for systems extended in two dimensions, by introducing new term in the Kohn-Sham potential which becomes unphysically large at the interfacial region, seriously affecting the convergence. If the dielectric medium is properly redefined as a function of the atomic coordinates, a good convergence is obtained and the constant of motion is conserved during the molecular dynamics simulations. Moreover, a significant gain in efficiency can be achieved if the simulation box is partitioned in two, solving the Poisson problem separately for the "dry" region using fast Fourier transforms, and for the solvated or "wet" region using a multigrid method. Eventually both solutions are combined in a self-consistent procedure, and in this way Car-Parrinello molecular dynamics simulations of solid-liquid interfaces can be performed at a very moderate computational cost. This scheme is employed to investigate the acid-base equilibrium at the TiO2-water interface.

Chemical Physics,Computational Physics
Ultracompact Electrical Double Layers at TiO2(110) Electrified Interfaces.

Immad M Nadeem,Christopher Penschke,Ji Chen,Xavier Torrelles,Axel Wilson,Hadeel Hussain,Gregory Cabailh,Oier Bikondoa,Jameel Imran,Christopher Nicklin,Robert Lindsay,Jörg Zegenhagen,Matthew O Blunt,Angelos Michaelides,Geoff Thornton

DOI: https://doi.org/10.1021/jacs.4c09911

IF: 15

2024-01-01

Journal of the American Chemical Society

Abstract:Metal-oxide aqueous interfaces are important in areas as varied as photocatalysis and mineral reforming. Crucial to the chemistry at these interfaces is the structure of the electrical double layer formed when anions or cations compensate for the charge arising from adsorbed H+ or OH-. This has proven extremely challenging to determine at the atomic level. In this work, we use a surface science approach, involving atomic level characterization, to determine the structure of pH-dependent model electrified interfaces of TiO2(110) with HCl and NaOH using surface X-ray diffraction (SXRD). A comparison with ab initio molecular dynamics calculations reveals the formation of surprisingly compact double layers. These involve inner-sphere bound Cl and Na ions, with respectively H+ and O-/OH- in the contact layer. Their exceptionally high electric fields will play a key role in determining the chemical reactivity.
The role of the water contact layer on hydration and transport at solid/liquid interfaces

J Gäding,V Della Balda,J Lan,J Konrad,M Iannuzzi,R H Meißner,G Tocci

DOI: https://doi.org/10.1073/pnas.2407877121

2024-09-17

Abstract:Understanding the structure in the nanoscopic region of water that is in direct contact with solid surfaces, so-called contact layer, is key to quantifying macroscopic properties that are of interest to e.g. catalysis, ice nucleation, nanofluidics, gas adsorption, and sensing. We explore the structure of the water contact layer on various technologically relevant solid surfaces, namely graphene, MoS[Formula: see text], Au(111), Au(100), Pt(111), and Pt(100), which have been previously hampered by time and length scale limitations of ab initio approaches or force field inaccuracies, by means of molecular dynamics simulations based on ab initio machine learning potentials built using an active learning scheme. Our results reveal that the in-plane intermolecular correlations of the water contact layer vary greatly among different systems: Whereas the contact layer on graphene and on Au(111) is predominantly homogeneous and isotropic, it is inhomogeneous and anisotropic on MoS[Formula: see text], on Au(100), and on the Pt surfaces, where it additionally forms two distinct sublayers. We apply hydrodynamics and the theory of the hydrophobic effect, to relate the energy corrugation and the characteristic length-scales of the contact layer with wetting, slippage, the hydration of small hydrophobic solutes and diffusio-osmotic transport. Thus, this work provides a microscopic picture of the water contact layer and links it to macroscopic properties of liquid/solid interfaces that are measured experimentally and that are relevant to wetting, hydrophobic solvation, nanofluidics, and osmotic transport.
In situ probing electrified interfacial water structures at atomically flat surfaces

Chao-Yu Li,Jia-Bo Le,Yao-Hui Wang,Shu Chen,Zhi-Lin Yang,Jian-Feng Li,Jun Cheng,Zhong-Qun Tian

DOI: https://doi.org/10.1038/s41563-019-0356-x

IF: 41.2

2019-04-29

Nature Materials

Abstract:Solid/liquid interfaces are ubiquitous in nature and knowledge of their atomic-level structure is essential in elucidating many phenomena in chemistry, physics, materials science and Earth science<sup><a href="/articles/s41563-019-0356-x#ref-CR1">1</a></sup>. In electrochemistry, in particular, the detailed structure of interfacial water, such as the orientation and hydrogen-bonding network in electric double layers under bias potentials, has a significant impact on the electrochemical performances of electrode materials<sup><a href="#ref-CR2">2</a>,<a href="#ref-CR3">3</a>,<a href="/articles/s41563-019-0356-x#ref-CR4">4</a></sup>. To elucidate the structures of electric double layers at electrochemical interfaces, we combine in situ Raman spectroscopy and ab initio molecular dynamics and distinguish two structural transitions of interfacial water at electrified Au single-crystal electrode surfaces. Towards negative potentials, the interfacial water molecules evolve from structurally 'parallel' to 'one-H-down' and then to 'two-H-down'. Concurrently, the number of hydrogen bonds in the interfacial water also undergoes two transitions. Our findings shed light on the fundamental understanding of electric double layers and electrochemical processes at the interfaces.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter
Coupling of surface chemistry and electric double layer at TiO$_2$ electrochemical interfaces

Chao Zhang,Jürg Hutter,Michiel Sprik

DOI: https://doi.org/10.1021/acs.jpclett.9b01355

2019-06-30

Abstract:Surfaces of metal oxides at working conditions are usually electrified due to the acid-base chemistry. The charged interface compensated with counterions forms the so-called electric double layer. The coupling of surface chemistry and electric double layer is considered to be crucial but poorly understood because of lacking the information at the atomistic scale. Here, we used the latest development in density functional theory based finite-field molecular dynamics simulation to investigate pH-dependence of the Helmholtz capacitance at electrified rutile TiO$_2$ (110)-NaCl electrolyte interfaces. It is found that, due to competing forces from surface adsorption and from electric double layer, water molecules have a stronger structural fluctuation at high pH and this leads to a much larger capacitance. It is also seen that, interfacial proton transfers at low pH increase significantly the capacitance value. These findings elucidate the microscopic origin for the same trend observed in titration experiments.

Soft Condensed Matter,Chemical Physics
Ab initio molecular dynamics investigation of the Pt(111)-water interface structure in an alkaline environment with high surface OH-coverages

Lauri Johannes Partanen,Kari Laasonen

DOI: https://doi.org/10.1039/d4cp01100g

IF: 3.3

2024-06-16

Physical Chemistry Chemical Physics

Abstract:In this study, we investigate the structure of the Pt(111)-water interface in an alkaline environment with large OH coverages of 1/3, 2/3, and 1 ML using a large well-equilibrated system. We observe that the OH coverage influences both the orientational distribution of the water molecules and their density, with more structure associated with higher coverage. At the same time, there is evidence of a highly dynamic hydrogen bond network on the lower coverage systems with substantial exchange of water between the surface and the solvent. In addition to OH and H 2 O species, which are preferentially located at the top sites, the 1/3 and 2/3 ML surfaces also contains O atoms, which are relatively stable and prefer the hollow sites. In contrast, the 1 ML surface showed none of these dynamics, and is unlikely to be active. The dynamic coexistence of all three species on Pt(111) electrodes in alkaline conditions necessitates the investigation of several possible reaction paths for processess like ORR and water splitting. Finally, the exchange processes observed between the solvent and the interface underscore the need to explicitly include liquid water in simulations of systems similar to Pt(111).

chemistry, physical,physics, atomic, molecular & chemical
Free energy of proton transfer at the water–TiO 2 interface from ab initio deep potential molecular dynamics

Marcos F. Calegari Andrade,Hsin-Yu Ko,Linfeng Zhang,Roberto Car,Annabella Selloni

DOI: https://doi.org/10.1039/c9sc05116c

IF: 8.4

2020-01-01

Chemical Science

Abstract:TiO 2 is a widely used photocatalyst in science and technology and its interface with water is important in fields ranging from geochemistry to biomedicine.

chemistry, multidisciplinary
Water at an electrochemical interface - a simulation study

Adam P. Willard,Stewart K. Reed,Paul A. Madden,David Chandler

DOI: https://doi.org/10.1039/B805544K

2008-04-19

Abstract:The results of molecular dynamics simulations of the properties of water in an aqueous ionic solution close to an interface with a model metallic electrode are described. In the simulations the electrode behaves as an ideally polarizable hydrophilic metal, supporting image charge interactions with charged species, and it is maintained at a constant electrical potential with respect to the solution so that the model is a textbook representation of an electrochemical interface through which no current is passing. We show how water is strongly attracted to and ordered at the electrode surface. This ordering is different to the structure that might be imagined from continuum models of electrode interfaces. Further, this ordering significantly affects the probability of ions reaching the surface. We describe the concomitant motion and configurations of the water and ions as functions of the electrode potential, and we analyze the length scales over which ionic atmospheres fluctuate. The statistics of these fluctuations depend upon surface structure and ionic strength. The fluctuations are large, sufficiently so that the mean ionic atmosphere is a poor descriptor of the aqueous environment near a metal surface. The importance of this finding for a description of electrochemical reactions is examined by calculating, directly from the simulation, Marcus free energy profiles for transfer of charge between the electrode and a redox species in the solution and comparing the results with the predictions of continuum theories. Significant departures from the electrochemical textbook descriptions of the phenomenon are found and their physical origins are characterized from the atomistic perspective of the simulations.

Statistical Mechanics
Molecular Simulation of Electrode-Solution Interfaces

Laura Scalfi,Mathieu Salanne,Benjamin Rotenberg

DOI: https://doi.org/10.1146/annurev-physchem-090519-024042

2021-04-20

Annual Review of Physical Chemistry

Abstract:Many key industrial processes, from electricity production, conversion, and storage to electrocatalysis or electrochemistry in general, rely on physical mechanisms occurring at the interface between a metallic electrode and an electrolyte solution, summarized by the concept of an electric double layer, with the accumulation/depletion of electrons on the metal side and of ions on the liquid side. While electrostatic interactions play an essential role in the structure, thermodynamics, dynamics, and reactivity of electrode-electrolyte interfaces, these properties also crucially depend on the nature of the ions and solvent, as well as that of the metal itself. Such interfaces pose many challenges for modeling because they are a place where quantum chemistry meets statistical physics. In the present review, we explore the recent advances in the description and understanding of electrode-electrolyte interfaces with classical molecular simulations, with a focus on planar interfaces and solvent-based liquids, from pure solvent to water-in-salt electrolytes.

chemistry, physical

The Electrostatic Double Layer of Pt/Water Interfaces From First Principles Molecular Dynamics

The nanoscale structure of the Pt-water double layer under bias revealed

Revisiting the Electrified Pt(111)/Water Interfaces through an Affordable Double-Reference ab-initio Approach

The Water-Amorphous Silica Interface: Analysis Of The Stern Layer And Surface Conduction

Thermodynamic Description of Interfaces Applying the 2PT Method on ReaxFF Molecular Dynamics Simulations

Water Structures and Anisotropic Dynamics at Pt(211)/Water Interface Revealed by Machine Learning Molecular Dynamics

Insight into the interface between Fe$_3$O$_4$(001) surface and water overlayers through multiscale molecular dynamics simulations

Autocatalytic and cooperatively-stabilized dissociation of water on a stepped platinum surface

Hybrid Molecular Dynamics and First-Principles Study on the Work Function of a Pt(111) Electrode Immersed in Aqueous Solution at Room Temperature

Structural characterizations of water-metal interfaces

Theoretical Modeling of Electrode/electrolyte Interface from First-Principles Periodic Continuum Solvation Method

Room temperature structure and energetics of water-hydroxyl layers on Pt(111)

First-principles molecular dynamics simulations at solid-liquid interfaces with a continuum solvent

Ultracompact Electrical Double Layers at TiO2(110) Electrified Interfaces.

The role of the water contact layer on hydration and transport at solid/liquid interfaces

In situ probing electrified interfacial water structures at atomically flat surfaces

Coupling of surface chemistry and electric double layer at TiO$_2$ electrochemical interfaces

Ab initio molecular dynamics investigation of the Pt(111)-water interface structure in an alkaline environment with high surface OH-coverages

Free energy of proton transfer at the water–TiO 2 interface from ab initio deep potential molecular dynamics

Water at an electrochemical interface - a simulation study

Molecular Simulation of Electrode-Solution Interfaces