Abstract:Purpose:Different from the theory of acoustic monopole spherical radiation, the acoustic dipole radiation based theory introduces the radiation pattern of Lorentz force induced dipole sources to describe the principle of magnetoacoustic tomography with magnetic induction (MAT‐MI). Although two‐dimensional (2D) simulations have been studied for cylindrical phantom models, layer effects of the dipole sources within the entire object along thez direction still need to be investigated to evaluate the performance of MAT‐MI for different geometric specifications. The purpose of this work is further verifying the validity and generality of acoustic dipole radiation based theory for MAT‐MI with two new models in different shapes, dimensions, and conductivities.Methods:Based on the theory of acoustic dipole radiation, the principles of MAT‐MI were analyzed with derived analytic formulae. 2D and 3D numerical studies for two new models of aluminum foil and cooked egg were conducted to simulate acoustic pressures and corresponding waveforms, and 2D images of the scanned layers were reconstructed with the simplified back projection algorithm for the waveforms collected around the models. The spatial resolution for conductivity boundary differentiation was also analyzed with different foil thickness. For comparison, two experimental measurements were conducted for a cylindrical aluminum foil phantom and a shell‐peeled cooked egg. The collected waveforms and the reconstructed images of the scanned layers were achieved to verify the validation of the acoustic dipole radiation based theory for MAT‐MI.Results:Despite the difference between the 2D and 3D simulated pressures, good consistence of the collected waveforms proves that wave clusters are generated by the abrupt pressure changes with bipolar vibration phases, representing the opposite polarities of the conductivity changes along the measurement direction. The configuration of the scanned layer can be reconstructed in terms of shape and size, and the conductivity boundaries are displayed in stripes with different contrast and bipolar intensities. Layer effects are demonstrated to have little influence on the collected waveforms and the reconstructed images of the scanned layers for the two new models. The experimental results have good agreements with numerical simulations, and the reconstructed 2D images provide conductivity configurations in the scanned layers of the aluminum foil and the egg models.Conclusions:It can be concluded that the acoustic pressure of MAT‐MI is produced by the divergence of the induced Lorentz force, and the collected waveforms comprise wave clusters with bipolar vibration phases and different amplitudes, providing the information of conductivity boundaries in the scanned layer. With the simplified back projection algorithm for diffraction sources, collected waveforms can be used to reconstruct 2D conductivity contrast image and the conductivity configuration in the scanned layer can be obtained in terms of shape and size in stripes with the spatial resolution of the acoustic wavelength. The favorable results further verify the validity and generality of the acoustic dipole radiation based theory and suggest the feasibility of MAT‐MI as an effective electrical impedance contrast imaging approach for medical imaging.

Three-dimensional Magnetic Induction Tomography: Improved Performance for the Center Regions inside a Low Conductive and Voluminous Body

Characterization and Reduction of X-Gradient Induced Eddy Currents in A Ndfeb Magnetic Resonance Imaging Magnet-3d Finite Element Method-Based Numerical Studies

Design of Sector Multi-Channel Detecting System for Magnetic Induction Tomography

Design of a Magnetic Induction Tomography System by Gradiometer Coils for Conductive Fluid Imaging.

Simulation Study for a New Magnetic Induction Tomography Coil System with Weakly Perturbing in Conducting Background

Magnetoacoustic Tomography with Magnetic Induction: a Novel Approach for Electrical Impedance Imaging

Subwavelength Dielectric Waveguide for Efficient Travelling-Wave Magnetic Resonance Imaging

Simplified Conductivity Reconstruction Algorithm Based on Hilbert Transform of Magnetic Induced Boundary Vibration

Three-Dimensional Magneto-Acousto-Electrical Computed Tomography (3D MAE-CT): A Preliminary Study Using Ultrasound Linear Array Transducer

Principle and Performance of Magnetically Induced Magnetoacoustic Tomography for Tissues with Cone Shaped Transducer.

Numerical Approach for the Sensitivity of A High-Frequency Magnetic Induction Tomography System Based on Boundary Elements and Perturbation Method

Magnetic Induction Tomography Using Multi-Channel Phase-Domain Transceiver for Structural Health Monitoring

A Modular Magnetic Induction Tomography System for Low-Conductivity Medium Imaging

Transducer Influence on Magnetoacoustic Tomography with Magnetic Induction Based on 3D Equivalent Source Analysis for Tissues

Solving the Inverse Problem of Magnetic Induction Tomography Using Gauss-Newton Iterative Method and Zoning Technique to Reduce Unknown Coefficients

Acoustic Dipole Radiation Based Electrical Impedance Contrast Imaging Approach of Magnetoacoustic Tomography with Magnetic Induction

Improved Magneto-Acousto-Electrical Computed Tomography (MAE-CT) With Multi-Angle Plane Wave Excitation

Three-dimensional model of conductivity imaging for magneto-acousto-electrical tomography

Magneto-Acousto-Electrical Tomography with Magnetic Induction for Conductivity Reconstruction.

A Three-Dimensional Bioimpedance Imaging Algorithm by Means of Magnetoacoustic Tomography with Magnetic Induction

Research on Direct 3D Electromagnetic Tomography Technique