Abstract:In this work, a novel sol-gel coating of N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AAPTS)-silica was prepared for capillary microextraction (CME) of trace Cu, Zn, Ni, Hg and Cd followed by on-line ICP-MS detection. This organic-inorganic hybrid coating was in situ created on the inner walls of fused silica capillary using a sol solution containing tetramethoxysilane (TMOS) as a precursor, AAPTS as a co-precursor, ethanol as the solvent and cetyltrimethylammonium bromide (CTAB) as the template. The structure of the capillary coating was characterized by IR, SEM and TEM. Various experimental parameters affecting capillary microextraction of the target analytes have been investigated carefully, and the optimized extraction conditions were established. It was found that the AAPTS-silica coating with a terminal functional group of -NH-CH2-CH2-NH2 exhibited a high selectivity towards the selected metal ions. With a consumption of 1.0 mL sample solution and 80 microL eluent, the detection limits (3sigma) were found to be 1.8, 11.8, 1.1, 3.3 and 1.4 pg mL(-1) for Cu, Zn, Ni, Hg and Cd, respectively. A sampling frequency of 14 h(-1) and an enrichment factor of 12.5 were obtained under the optimized experimental conditions. The relative standard deviations (RSDs) for the target analytes were less than 3.6% (C = 1 ng mL(-1), n = 7, sample volume = 1 mL). Two certified reference materials of NIES No.10-c rice flour and BCR-CRM 278 mussel flesh were analyzed to validate the proposed method, and the determined values were in good agreement with the certified values. The developed method had also been applied to the determination of trace target elements in human hair, serum and urine, and the recoveries for the spiked samples were in the range of 89.2-101.8%. The AAPTS-silica coated capillary showed an excellent pH resistance and could be used for more than 120 times without decreasing adsorption efficiency.

Preparation of an L-Cysteine Functionalized Magnetic Nanosorbent for the Sensitive Quantification of Heavy Metal Ions in Food by Graphite Furnace Atomic Absorption Spectrometry

Magnetic Luffa@metal-organic frameworks (MOF-199) nanocomposite for the solid phase microextraction of some metal ions at trace levels from food and water samples

Highly Efficient Co-Removal of Heavy Metals in Wastewater from Chemical Oxygen Demand Testing Instrument by Cysteine-Functionalized Magnetic Nanoparticles

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Design of Magnetic Nanoparticles with High Magnetic Separation Efficiencies and Durability for Cu2+ Adsorption

Vortex‐Assisted Magnetic Solid‐Phase Extraction of Heavy Metals in Water and Food Samples Using Iron Oxide Nanoparticle‐Impregnated Carboxymethyl‐β‐Cyclodextrin

Pyrene-1-carboxaldehyde Hydrazone Modified Mesoporous Silica Foam-Based Strategy for Efficient and Accurate Electroanalysis of Copper in Food Samples

Fabrication and characterization of magnetic mesoporous nanoparticles for efficient determination and magnetic separation of sulfonamides in food samples

A Magnetized Nanoparticle Based Solid-Phase Extraction Procedure Followed by Inductively Coupled Plasma Atomic Emission Spectrometry to Determine Arsenic, Lead and Cadmium in Water, Milk, Indian Rice and Red Tea

One-step effervescent tablet-assisted dispersive solid-phase microextraction based on an l-cysteine-functionalized carbon-coated magnetic nanocomposite for the determination of iron and zinc ions in milk samples

Quantification of trace heavy metals in environmental water, soil and atmospheric particulates with their bioaccessibility analysis

Mercaptobenzothiazole-Functionalized Magnetic Carbon Nanospheres of Type Fe3o4@Sio2@C for the Preconcentration of Nickel, Copper and Lead Prior to Their Determination by Icp-Ms

Preparation Of Amino-Functionalized Cofe2o4@Sio2 Magnetic Nanocomposites For Potential Application In Absorbing Heavy Metal Ions

Preparation of a high pH-resistant AAPTS-silica coating and its application to capillary microextraction (CME) of Cu, Zn, Ni, Hg and Cd from biological samples followed by on-line ICP-MS detection

Functionalized hollow MnFe2O4 nanospheres: design, applications and mechanism for efficient adsorption of heavy metal ions

Simultaneous electrochemical sensing of heavy metal ions based on a g-C3N4/CNT/NH2-MIL-88(Fe) nanocomposite.

Solid phase extraction of heavy metal ions based on a novel functionalized magnetic multi-walled carbon nanotube composite with the aid of experimental design methodology

Rapid preparation of melamine based magnetic covalent triazine polymers for highly efficient extraction of copper(II), chromium(III) and lead(II) ions from environmental and biological samples

A Multifunctional Magnetic Fluorescent Nanoprobe for Copper(II) Using ZnS-DL-Mercaptosuccinic Acid-Modified Fe3O4 Nanocomposites

Determination of Cobalt (II), Copper (II), Lead (II), and Zinc (II) with Preconcentration by 8-Hydroxyquinoline-Coated Magnetic Nanoparticles (MNPs) and Microinjection Sampling–Flame Atomic Absorption Spectrometry (MIS–FAAS)

Morphology/Functionality-Tailoring of Arc-Produced Graphite Encapsulated Silver Nanoparticles for Highly Sensitive and Selective Detection of Free Cu2+, Hg2+ and Complex Cr(Iii)-Citrate