Abstract:Background: The COVID19 epidemic highlighted the importance of air in the transmission of pathogens. Air disinfection is one of the key points to reduce the risk of transmission both in the health sector and in public, civil and industrial environments. All bacteria and viruses tested to date can be inactivated by UV-C rays. Laboratory tested UV-C systems are increasingly popular and proposed as effective technologies for air purification; few studies have evaluated their performance in populated indoor environments. The aim of this investigation was to evaluate the effectiveness of a UV-C disinfection system for air in a real working context. Methods: This experimental study was conducted between December 2020 and February 2021 in an office of the Department of Molecular and Developmental Medicine of the University of Siena, Italy. A pre-final version air purifier (Cleaning Air T12), capable of treating 210 m3/h of air, was first tested for its ability to filter particulates and reduce microbial air contamination in the absence of people. Subsequently, the experiments were conducted in the presence of 3-5 subjects who worked for several hours in an office. During the tests, microbiological samples of air were collected in real time, switching the system on and off periodically. Air samples were collected and incubated on Petri dishes at 36 °C and 22 °C. Statistical analysis was performed with Stata 16 software assuming a significance level of 95%. An interpolating model was identified to describe the dynamics of contamination reduction when the device operates. Results: Preliminary tests showed a significant 62.5% reduction in Colony-Forming Units (CFUs) with 36 °C incubation. Reductions in the particulate component were also observed. In the main test, comparison of CFU data, between the device-on phase (90 min) and the subsequent device-off phase (60 min), showed statistically significant increase (p = 0.001) of environmental contamination passing from a mean of 86.6 (65.8-107.4) to 171.1 (143.9-198.3) CFU/m3, that is a rise of about 100%. The interpolating model exhibited a good fit of CFU reduction trend with the device on. Conclusions: The system, which mainly uses UV-C lamps for disinfection, was able to significantly reduce environmental and human contamination in real time. Experimental tests have shown that as soon as the device is switched off, after at least half an hour of operation, the healthiness of the air decreases drastically within 10 minutes, bringing the airborne microbial contamination (induced by the presence of operators in the environment) to levels even higher than 150% of the last value with the device on. Re-engineering strategies for system improvement were also discussed.

Microbiological air analysis of industrial premises and photocatalysis efficiency for its disinfection

Study on the effectiveness of an air treatment tool that combines filtration and photocatalysis

METHODS FOR ASSESSING MICROBIOLOGICAL CONTAMINATION AND ACTIVITY OF DISINFECTING DRUGS IN THE PRODUCTION OF FOOD PRODUCTS

EFFICIENCY OF PREVENTIVE AEROSOL DISINFECTION OF PREMISES WITH NEUTRAL ANOLYTE

Wind of change: Better air for microbial environmental control

Microbiological and Toxicological Hazards in Sewage Treatment Plant Bioaerosol and Dust

Effect on the bactericidal device for decontamination the air microorganisms in poultry house on the content of toxic gases

Design and performance evaluation of a photocatalytic reactor for indoor air disinfection

Analysis of a UV photocatalytic oxidation-based disinfection system for hydroxyl radicals, negative air ions generation and their impact on inactivation of pathogenic micro-organisms

Shedding light on the problem: Influence of the radiator power, source-sample distance, and exposure time on the performance of UV-C lamps in laboratory and real-world conditions

Monitoring of enteropathogenic Gram-negative bacteria in wastewater treatment plants: a multimethod approach

Microbial air contamination on the premises of the sewage treatment plant in Bydgoszcz (Poland) and antibiotic resistance of Staphylococcus spp.

Evaluation of Germicidal Ultraviolet-C disinfection in a Real-World Outpatient Healthcare Environment

Experimental evaluation of a full-scale in-duct UV germicidal irradiation system for bioaerosols inactivation

Photocatalytic Oxidation for Antimicrobial Control in Built Environment: A Brief Literature Overview

Efficiency of the disinfectant which based on lactic acid during aerosol disinfection in presence of the birds

Veterinary and sanitary assessment and disinfection of refrigerator chambers of meat processing enterprises

Kinetics of inactivation of bacteria responsible for infections in hospitals using UV-LED

Culturable Bioaerosols Assessment in a Waste-Sorting Plant and UV-C Decontamination

Using photocatalyzed-peroxonization to disinfect and denature genetic material of bacterial plasmids present in hospital wastewater

Effect of subinhibitory concentrations of biocides on formation of adaptive resistance of clinical isolates of Klebsiella pneumoniae