Abstract:Abstract The reservoir of Daqing Heidimiao Oilfield (permeability 1736×10−3μm2) contains heavy oil, with the average viscosity of 3306 mPa•s. It is developed by steam flooding and steam huff and puff, however, the recovery rate is only 14.6%. Therefore, the multi-component thermal fluid huff-and-puff technology is applied to, dealing with pertinent problems such as gas channeling, corrosion and oil pump lock in the process so as to improve oil recovery and production. Mechanism: Cooling by water, the ultra-high temperature gas generated via combustion of diesel or natural gas with air produces a multi-component thermal fluid containing CO2,N2 and vapor, combining the advantages of gas absorption and thermal recovery. Simulation: A multi-component and multi-phase percolation model is built to optimize the huff-and-puff parameters including composition ratio, temperature and injection volume. Supporting techniques: a high temperature oil-and-acid resistant foam system to form a precedent-blocking slug and automatically adjust the huff-and-puff profile. a dedicated low-cost and high-efficiency corrosion inhibitor system to realize corrosion-resistance. a four-node down-hole gas-liquid separation device to increase efficiency. The comprehensive reduced-viscosity rate is more than 30%; high-pressure air chambers, ranging from 0.2 to 2.0MPa, are formed for elastic energy replenishment. Field tests show the average annual oil increase per well is about 3800 barrels, with the highest being about 7200 barrels. The numerical simulation results show that the optimal composition ratio (N2: CO2: vapor) is 5:1:1.5, that the best injection amount is 30∼50×104Nm3 and that the injection temperature is preferably 280 ∼ 300 °C. The oil-and-acid resistant foaming agent has improved recovery efficiency, as a significantly improved profile of gas absorption, and the oil extraction degree increases by about 31.5%. High temperature corrosion is prevented, through intermittent injection of high-temperature-resistant corrosion inhibitor (corrosion inhibition rate 70.5% at 350 °C), and the frequency of pipeline corrosion is reduced averagely by 98.5%. Air-lock in pump vanishes via gas-liquid separation devise, with the average indoor pump efficiency increases by more than 50% (gas-liquid ratio ≤3000m3/m3)and the one in field test increases from less than 20% to over 45%. More importantly, the maintenance period has reached 662d. This technology has been applied to 98 wells in Daqing to date, 95 of which are stimulated successfully. The multi-component thermal fluid huff-and-puff technology solves the problems such as gas channeling, corrosion and air-lock in pumps through supporting techniques and the synergism of steam flooding and thermal recovery to enhance oil recovery and can be used as a superseded technology after steam huff-and-puff treatment to increase the EUR, especially for heavy oil reservoirs with medium and high permeability.

Progress of the Artificial Lift Technology Suitable for Offshore Thermal Recovery in Bohai Bay, China

Study of Multi-component Thermal Fluid Recovery on Offshore Heavy Oilfield in Bohai Bay of China

The Thermal Recovery Methods and Technical Limits of Bohai Offshore Heavy Oil Reservoirs: A Case Study

ERD Record in Shallow Weakly Consolidated Formation with Remarkable Efficiency

Research and Application of Wellbore Temperature Field Models for Thermal Recovery Well in Offshore Heavy Oilfield

Application of Integration Gas-Lift on Offshore Oilfield

A High-Temperature Plugging System for Offshore Heavy Oil Thermal Recovery.

Recovery Method and Parameter Optimization of a Pilot Test for Conformance Control Flooding and Thermal Recovery in the Offshore Heavy Oilfield

The Application of the Multi-Component Thermal Fluid Huff and Puff Technology to Daqing Heavy Oil Block

Research on Key Techniques of Offshore Heavy Oil Production Based on Distributed Electro-Acoustic Efficiency

The Heating Range Calculation Method Research and Application for Thermal Recovery Well in Offshore

Research on hot water chemical flooding technology in Bohai heavy oil field

Analysis for Flow and Heat Transfer of Thermal Recovery Well with Steam and Multiple Thermal Fluids Injection

Integrated Technologies in the Floating Hydraulic Fracturing for Unconventional Offshore Reservoir

Research and Application for Alternate Production Technology of Dual-Branch Horizontal Wells in an Offshore Oilfield

Key technologies of polymer flooding in offshore oilfield of Bohai Bay

Research and Application of Electronic Control Intelligent Oil Recovery Technology in Horizontal Well

An Intelligent Artificial Lift Technology and its Trial in Middle East: Integration of Remote Wireless Control and Artificial Automation for Zonal Water Injection

Experimental and simulation studies on steam stimulation with multiple fluids for offshore heavy oil reservoirs

Technology Progress in High-Frequency Electromagnetic In Situ Thermal Recovery of Heavy Oil and Its Prospects in Low-Carbon Situations

Research and Application of Systematic Lift Techology for Screw Pump in Deviated Well