Abstract:In this study, a thermo-mechanical finite element model was developed to investigate the thermal deformation during a stamping process of an automotive body part. The stamping process was decomposed into the 6 sub-steps to reflect the physical boundary conditions found in an actual stamping equipment. The temperature distributions of the actual stamping process were measured by two thermography cameras. The developed numerical procedure was then validated against the measured temperature distributions. Due to the limited accessibility to the actual equipment and high reflectivity of the involved material, the reflectivity index for the thermal imaging device (i.e., emissivity) was experimentally determined. A sample specimen made of the same material with the die material was built. The thermocouples were placed underneath the specimen surface through holes and used to directly measure the surface temperature distribution. The emissivity for the sample specimen was then determined by comparing the temperature measured by the thermocouples to the temperature measured by the thermographic camera. When the lubrication oils were spread on the sample specimen, the emissivity was set to a value 0.7. The thermal images were corrected based on the emissivity experimentally obtained and used to validate the finite element model simulation for the stamping process. With the validated finite element model, the investigation on the variation in the temperature and stress during each sub-step was performed. With the zero thermal expansion rate, the pure thermal effect on the temperature distribution was simulated. The pure thermal deformation in the Blank (i.e., target surface) was similar to the spring back distance after the blank was released from the molds. During the stamping process, the heat generation was obtained due to either friction between surfaces and plastic deformation of the target surface. We found that the plastic deformation played a critical role in the final temperature rise.

Case Study: Modeling of the cycle time reduction in a B-Pillar hot stamping operation using conformal cooling

Thermo-mechanical coupled simulation of hot stamping components for process design

Development of Estimation Procedure of Contact Heat Transfer Coefficient at the Part–Tool Interface in Hot Stamping Process

A case study on the design of a hot stamping tool with conformal cooling channels

Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

Numerical and Experimental Investigation into Hot Stamping of High Strength Steel Sheet for Auto B Pillar Reinforced Panel

Performance improvement of hot stamping die for patchwork blank using mixed cooling channel designs with straight and conformal channels

Experimental investigation of a new low-temperature hot stamping process for boron steels

Cooling System of Hot Stamping of Quenchable Steel BR1500HS: Optimization and Manufacturing Methods

A Holistic Approach to Cooling System Selection and Injection Molding Process Optimization Based on Non-Dominated Sorting

Research on One-Step Quenching and Partitioning Treatment and Its Application in Hot Stamping Process

Improving the Quality and Productivity of Molded Parts with a New Design of Conformal Cooling Channels for the Injection Molding Process

Characterization of a direct metal printed injection mold with different conformal cooling channels

Evaluating the Cooling Efficiency of Polymer Injection Molds by Computer Simulation Using Conformal Channels

Arc-directed energy deposition for hot forging mold cavity with conformal cooling channels

Application of New Conformal Cooling Layouts to the Green Injection Molding of Complex Slender Polymeric Parts with High Dimensional Specifications

Numerical modeling of the thermal deformation during stamping process of an automotive body part

Investigation of the Hot-Stamping Process for Advanced High-Strength Steel Sheet by Numerical Simulation

Simulated Analysis and Experimental Investigation on Edge Qualities of High Strength Steels Hot Blanking Parts

A Tailored Preparation Method of Variable Strength for Ultra-High-Strength Steel Sheet and Mapping Mechanism between Process and Property

Design optimization and application of hot-stamped B pillar with local patchwork blanks