Abstract:Abstract. The multi-scheme chemical ionisation inlet 1 (MION1) allows fast switching between measuring atmospheric ions without chemical ionisation and neutral molecules by multiple chemical ionisation methods. In this study, the upgraded multi-scheme chemical ionisation inlet 2 (MION2) is presented. The new design features improved ion optics that increase the reagent ion concentration, a generally more robust operation and the possibility to run multiple chemical ionisation methods with the same ionisation time. To simplify the regular calibration of MION2, we developed an open-source flow reactor chemistry model (MARFORCE) to quantify the chemical production of sulfuric acid (H2SO4), hypoiodous acid (HOI) and hydroperoxyl radical (HO2). MARFORCE simulates convection-diffusion-reaction processes inside typical cylindrical flow reactors with uniform inner diameters. The model also provides options to simulate the chemical processes 1) when two flow reactors with different inner diameters are connected together and 2) when two flows are merged into one (connected by a Y-shape tee), but with reduced accuracy. Additionally, the chemical mechanism files in the model are compatible with the widely-used Master Chemical Mechanism, thus allowing future adaptation to simulate other chemical processes in flow reactors. We further carried out detailed characterisation of the bromide (Br−) and nitrate (NO3−) chemical ionisation methods with different ionisation times. We calibrated H2SO4, HOI and HO2 by combining gas kinetic experiments with the MARFORCE model. Sulfur dioxide (SO2), water (H2O) and molecular iodine (I2) were evaluated using dilution experiments from a gas cylinder (SO2), dew point mirror measurements (H2O), and a derivatization approach in combination with high-performance liquid chromatography quantification (I2), respectively. We find that the detection limit is negatively correlated with the fragmentation enthalpy of the analyte-reagent ion (Br−) cluster, i.e., a stronger binding (larger fragmentation enthalpy) leads to a lower detection limit. Additionally, a moderately longer reaction time enhances the detection sensitivity thus decreasing the detection limit. For example, the detection limit for H2SO4 is estimated to be 2.9 × 104 molec. cm−3 with a 300 ms ionisation time. A direct comparison suggests that this is even better than the widely-used Eisele-type chemical ionisation inlet. While the NO3− chemical ionisation method is generally more robust, we find that the Br− chemical ionisation method (Br−-MION2) is significantly affected by air water content. Higher air water content results in lower sensitivity for HO2 and SO2 within the examined conditions. On the other hand, a steep sensitivity drop of H2SO4, HOI and I2 is only observed when the dew point is greater than 0.5–10.5 ℃ (equivalent to 20–40 % RH; calculated at 25 ℃ hereafter). Future studies utilising atmospheric pressure Br− chemical ionisation method, including Br−-MION2, should carefully address the humidity effect on a molecular basis. By combining methods such as water-insensitive NO3−-MION2 with Br−-MION2, MION2 should be able to provide greater details of air composition than either of these methods alone. Combining instrument voltage-scanning, chemical kinetic experiments and quantum chemical calculations, we find that the HIO3 detection is not interfered with by iodine oxides under atmospherically relevant conditions. The IO3−, HIO3NO3− and HIO3Br− ions measured using the Br− and NO3− chemical ionisation methods are primarily, if not exclusively, produced from gaseous HIO3 molecules.

Experimental and theoretical study on the capture/desorption of gaseous methyl iodide on sea salt aerosols

Direct Observation for Relative-Humidity-dependent Mixing States of Submicron Particles Containing Organic Surfactants and Inorganic Salts

Experiments and Simulations of Ion-Enhanced Interfacial Chemistry on Aqueous NaCl Aerosols

Sea Salt Aerosols As A Reactive Surface for Inorganic and Organic Acidic Gases in the Arctic Troposphere

Optical Modeling of Sea Salt Aerosols: The Effects of Nonsphericity and Inhomogeneity

Chemical Implications of Rapid Reactive Absorption of I 2 O 4 at the Air-Water Interface

Spatial distribution and biogeochemical cycling of methyl iodide in the Yellow Sea and the East China Sea during summer

Important effects of relative humidity on the formation processes of iodine oxide particles from CH3I photo-oxidation

Measurement of iodine species and sulfuric acid using bromide chemical ionization mass spectrometers

Direct field evidence of autocatalytic iodine release from atmospheric aerosol

The gas-phase formation mechanism of iodic acid as an atmospheric aerosol source

Ion-induced iodic acid nucleation

Temperature, humidity, and ionisation effect of iodine oxoacid nucleation

Characterisation of the multi-scheme chemical ionisation inlet-2 and the detection of gaseous iodine species

First principles computational study on the adsorption mechanism of organic methyl iodide gas on triethylenediamine impregnated activated carbon

Ultra-Sensitive Determination of Particulate, Gaseous Inorganic and Organic Iodine-129 and Iodine-127 in Ambient Air

Sea salt reactivity over the northwest Atlantic: an in-depth look using the airborne ACTIVATE dataset

Iodine in the Atmosphere I: Computational Benchmark and Dimer Formation of Oxy-acids and Oxides

Capture of volatile iodine by aromatic amines solutions

Impact of SO 2 and light on chemical morphology and hygroscopicity of natural salt aerosols

Iodic acid formation and yield from iodine photolysis at the CERN CLOUD chamber