Abstract:Abstract Dispersion of a solvent into heavy oil and bitumen in porous media has special significance in the context of solvent-based as well as solvent-aided versions of SAGD and CSS recovery processes. While solvent is injected with steam, the mixture condensation temperature changes based on solvent partial pressure. In addition, water condensate creates a film which acts as a barrier and impacts solvent dissolution in oil. The solvent, which is not soluble or has very low solubility in water, may not be able to diffuse in the oleic phase due to the presence of the water film. The objective of the present study is to investigate the pore-scale solvent diffusion in oil for solvent-based and hybrid (steam + solvent) processes through the following steps: Developing a pore-scale simulator, capable of handling steam and solvent condensation as well as mass transfer in porous media. Investigating solvent dissolution in the oleic phase at the pore-level considering the asynchronous condensation of solvent and steam. Investigating the dissolution of solvent, either in gaseous phase or in the form of liquified thin bulk films of condensed solvent and water condensate, in the oleic phase. A pore-scale simulator was developed with the capability of modelling solvent mass transfer and condensation of both solvent and steam, along with a Navier-Stokes type solution for the velocity field. In addition, conjugate heat transfer was included in the model that takes into account the heat transfer from solvent and steam to the solid grains by considering the two media (i.e. solid and fluid) for the solution. A realistic description of a 2-dimensional porous medium is used for direct numerical simulation (DNS). The properties of a typical heavy oil and solvent were implemented in the model with diffusion coefficient as functions of both temperature and solvent concentration. After model setup, the newly added features of mass transfer and conjugate heat transfer were validated by comparison with analytical models. For mass transfer validation, the numerical results were in agreement with analytical solution for a capillary whereas the model performance for conjugate heat transfer were inline with the analytical solution proposed for heat flow over a slab. The pore-scale simulator was then used to model two-dimensional pore-scale experiments of solvent co-injection with steam. To reproduce the experimental results, the interface advancement velocity was calculated as an evidence of the chamber growth. The 2D numerical simulation results were in agreement with the experimental data. The condensation of solvent vapor and steam also changes fluid flow and flow pathways of solvent at the pore-scale which results in some complex fluid flow and behavior such as excessive unexpected channeling. The present study is the first of its kind which considers condensation of steam and solvent vapor at the pore scale. The model is used to investigate solvent vapor condensation in competition with steam at the pore-scale and to study the impact of solvent type and operating conditions such as pressure. The outcome of the present study improves our understanding of mass transfer in porous media for solvent- based and solvent-aided thermal recovery processes.

A Pore-Scale Investigation of Solvent-Assisted Thermal Processes for Heavy Oil and Bitumen Recovery - Mass Transfer and Condensation Mixing

A Semi-Compositional Approach to Model Asphaltene Precipitation and Deposition in Solvent-Based Bitumen Recovery Processes

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Solvent Versus Surfactant Co-Injection with Steam to Improve Efficiency of Steam Assisted Bitumen and Heavy Oil Recovery Processes

Three-Dimensional Physical Simulation of Heavy Oil Exploitation by Hot Solvent Injection

Solvent-dependent recovery characteristic and asphaltene deposition during solvent extraction of heavy oil

Determination of Mass Transfer Parameters in Solvent-Based Oil Recovery Techniques Using a Non-Equilibrium Boundary Condition at the Interface

Analysis of steam–solvent–bitumen phase behavior and solvent mass transfer for improving the performance of the ES-SAGD process

Analytical and numerical study of thermal and solvent-based gravity drainage for heavy oil recovery

Molecular Composition Characterization of Oilsand Heating Experiments to Investigate Steam-Solvent Effects and Chemical Reactions During Thermal Recovery

Modelling of dynamic mass transfer in a vapour extraction heavy oil recovery process

Spotlight onto surfactant–steam–bitumen interfacial behavior via molecular dynamics simulation

Mathematical Modeling of Dynamic Mass Transfer in Cyclic Solvent Injection

Experimental investigation of innovative superheated vapor extraction technique in heavy oil reservoirs: A two-dimensional visual analysis

Theoretical Insight into the Effect of Steam Temperature on Heavy Oil/Steam Interface Behaviors Using Molecular Dynamics Simulation

Molecular Insights into the Synergistic Mechanisms of Hybrid CO2-surfactant Thermal Systems at Heavy Oil-Water Interfaces

The importance of PVT to the steam solvent process

New Insights into the Interfacial Phenomena during Miscible Displacement by Hydrocarbon Solvents and CO2 in Heavy Oil Reservoirs

Microvisual Investigation on Steam-Assisted Heavy Oil Extraction Behavior in Heterogeneous Porous Media

Heavy Petroleum Supercritical Fluid Deasphalting Process Simulation Based On the Saturate, Aromatic, Resin, and Asphaltene Composition

Multicomponent Diffusion Modeling of Cyclic Solvent Injection in Ultratight Reservoirs