Abstract:The flow condensation heat transfer coefficient of R134a inside two helical micro-fin tubes with outer diameter of 6.35 mm and helical angles of 18o and 28o respectively were experimentally studied at a high mass flux ranging from 500 to 1100 kg m−2 s−1. The condensation temperatures are 35°C, 40°C and 45°C, and the vapor qualities ranges from 0.95 to 1.00 at the inlet section and from 0.00 to 0.05 at the outlet section. Experimental results show that there are annular and intermittent flow regimes inside the tube under experimental conditions, the ratio of annular flow region to the total heat transfer region is about 70%. The liquid film flow changes from rotational flow to coexistence of rotational and horizontal flows when the vapor quality is 0.475±0.08, 0.486±0.06 and 0.521±0.05, respectively and the corresponding saturation temperature is 35°C, 40°C and 45°C. Based on the experimental data, the heat transfer coefficient increases with increasing mass flux and fin helical angle, and with decreasing saturation temperature and Reynolds number of cooling water. In addition, the heat transfer coefficient of annular flow is greater than that of intermittent flow, in other words, the heat transfer coefficient increases with increasing vapor quality. The heat transfer coefficient obtained at high mass flux was compared with the calculated data of some published correlations used at low mass flux. It was found that most correlations underestimate the experimental heat transfer coefficient inside the micro-fin tube, and these prediction deviation increases with increasing mass flux and fin helical angle. By introducing some dimensionless numbers as well as considering the flow mechanism of liquid film inside the tube, two heat transfer coefficient correlations were proposed based on the experimental data. The ratio of liquid film thickness to fin height was used to characterize whether the liquid film flow is rotational flow or coexistence of rotational and horizontal flows in the proposed correlation, which shows a better prediction accuracy with a mean deviation of less than 7.3%.

Mass transfer inside spiral coils under laminar flow and possible applications

Numerical Simulation of Mass and Heat Transfer in Detachable Spiral Heat Exchanger

Mass and heat transfer at a helical coil imbedded in a fixed bed of cylinders with upward cocurrent gas-liquid flow

Mass and heat transfer behavior of a bubble column fitted with horizontal spiral tubes in bubbly-flow regime

Experimental Study on the Heat Transfer Characteristics of Supercritical Carbon Dioxide in Spiral Tube with High Pitch to Spiral Diameter Ratio

Field Synergy Analysis of Six Starts Spiral Corrugated Tube under High Reynolds Number

A comparative study between the effect of swirl flow and axial flow on the rate of diffusion controlled corrosion in a double tube heat exchanger

Experimental Research on Heat Transfer and Flow Resistance Properties in Spiral Twisted Tube Heat Exchanger

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

Numerical research on the heat transfer and pressure drop of supercritical CO2 in spiral wound tubes

Numerical Investigation of the Heat Transfer Characteristics of Liquid Lithium Metal in Spiral Tubes

Turbulent flows in a spiral double-pipe heat exchanger

Solid-liquid mass transfer in a bubble column reactor with tube bank internals

Convective heat transfer in helical coils for constant-property and variable-property flows with high Reynolds numbers

Research of Heat Transfer Characteristics of Supercritical CO2 in Spiral Tube Heat Exchangers

Analyzing The Influence of Diameter and Winding on Heat Transfer Efficiency in Spiral Tube Heat Exchangers: A CAD-Integrated CFD Study Using Solidworks Flow Simulation

Thermodynamic Analysis of Structural Parameters During Condensation in Spiral Tubes

Study On Heat Transfer Of High-Pressure Steam-Water Two-Phase Mixture In Helical Coils

CFD—ANN study on axial dispersion in helical and serpentine millimetric coils

Liquid-bridge flow on a vertical spiral spring and its mass transfer characteristics

Numerical Studies on Flow and Heat Transfer in Membrane Helical-Coil Heat Exchanger and Membrane Serpentine-Tube Heat Exchanger