Abstract:One of the recent issues in the world is climate change caused by global warming. Many countries have set an ultimate goal for carbon neutrality to prevent from further increase of the global temperatures. In this regard, research on development of renewable energy sources without any carbon emissions has been intensively conducted. Among many promising chemical fuels with sustainability, Hydrogen (H 2 ) can be produced by water (H 2 O) splitting. Especially, water splitting driven by photoelectrochemical reactions has great advantages in H 2 generation: photovoltage generated by light absorption in semiconductors may significantly reduce the applied overpotential which should be provided by external circuits. This photoelectrochemical system, called photoelectrochemical cell (PEC) for water splitting is basically composed of photoelectrodes, catalysts, and membranes for generation of photogenerated charge carriers, reducing overpotential by improving charge transfer kinetics, and prevention of H 2 and Oxygen (O 2 ) crossover, respectively. When photons from solar light with energies greater than band gap are incident on the photoelectrodes, an electron-hole pair (EHP) is formed in the semiconductor. These EHPs are separated and transported to the surface, driven by band bending formed at the semiconductors. In photoanodes, the most of the charge carriers arrived at the electrode surface are holes (h + s), which oxidizes H 2 O at the photoelectrode-electrolyte interface. The transfer of holes accompanies the proton transfers, thereby producing O 2 . The separated electrons (e − s) should travel to the (photo)cathode along the external circuit and generate H 2 . However, the overall efficiency of water splitting using PEC still confronts many challenges for wide commercialization, including the low solar-to-hydrogen (STH) efficiencies. In order to improve the performance, the semiconductor efficiently utilizes the photons in the visible light region, which takes 45% of solar irradiation. In this perspective, hematite (α-Fe 2 O 3 ) is one of the most promising candidates for the semiconductor as photoanodes owing to is narrow band gap of 1.9 ~ 2.2 eV, which is in the range between 550 ~ 650 nm. Meticulous cares should be also taken in catalysts localization to prevent from the parasitic photon loss, as well as the selection of catalytic materials. Because catalysts attribute to the improved charge transfer kinetics but also simultaneously become the sites that obstruct the light penetration to the semiconductor, resulting in the lower light absorption. Furthermore, physical and chemical composition of catalysts on the semiconductor surface significantly influence the charge transfer rates for the photoelectrochemical reactions by varying the electrical field gradient formed at the semiconductor∣catalyst∣electrolyte interface. As several procedures are additionally involved in the PEC, the electrochemical reaction pathways become more complicated rather than the one in electrolyzers utilizing conductive electrodes. Therefore, underlying understanding in semiconductor∣catalyst∣electrolyte interface is crucial to achieve the high performance in PECs. Herein, we demonstrate the hematite∣catalyst∣electrolyte interface as the photoanodes to investigate the photoelectrochemical reaction pathways in water oxidation. Hematite is the perfect material as the semiconductor model, not only due to the narrow band gap in the region of visible light but also the excellent stability even when exposed to the electrolytes and electrochemical environments. The hematite is fabricated by simple hydrothermal reactions, followed by step-wise heat treatment. The structure of hematite is optimized by varying hydrothermal temperatures, affecting the crystallinity and exposed area of the conductive substrate, fluorine-doped tin oxide (FTO). The recombination by back reduction is occurred at the exposed FTO surface by pinholes in hematite, which directly contact the electrolyte. Moreover, the localization of Co-based catalysts is also easily controlled by light-guided electrodeposition. In this hematite∣catalyst∣electrolyte interface, the overall water oxidation pathways are investigated by photoelectrochemical and Raman spectroscopic studies. It is expected that our study in here contributes to the in-depth understanding on the complicated photoelectrochemical reaction mechanism, might leading to the improved performance for wide commercialization of PEC.

Role of Cocatalysts on Hematite Photoanodes in Photoelectrocatalytic Water Splitting: Challenges and Future Perspectives

Cover Feature: Role of Cocatalysts on Hematite Photoanodes in Photoelectrocatalytic Water Splitting: Challenges and Future Perspectives (ChemCatChem 12/2020)

A Photoelectrochemical and Spectroscopic Studies of Photoelectrodes with Hematite∣Catalyst∣Electrolyte Interface Toward Oxygen Evolution Reaction

Surface Modification of Hematite Photoanodes with CeOx Cocatalyst for Improved Photoelectrochemical Water Oxidation Kinetics

The role of carbon dots - derived underlayer in hematite photoanodes

Typical Strategies to Facilitate Charge Transfer for Enhanced Oxygen Evolution Reaction: Case Studies on Hematite

Hematite photoanode modified with inexpensive hole-storage layer for highly efficient solar water oxidation

Enhancing photocatalytic efficiency with hematite photoanodes: principles, properties, and strategies for surface, bulk, and interface charge transfer improvement

Enhanced photoelectrochemical water oxidation in Hematite: Accelerated charge separation with Co doping

Advancing Hematite Photoanodes for Photoelectrochemical Water Splitting: The Impact of g‐C3N4 Supported Ni‐CoP on Photogenerated Hole Dynamics

Ti, Zn Co-Doped Hematite Photoanode for Solar Driven Photoelectrochemical Water Oxidation

Identifying the Spectroelectrochemical Characteristics of Hematite Photoanodes for Water Oxidation

Ultrathin Coox-Modified Hematite with Low Onset Potential for Solar Water Oxidation

Enhancing solar energy conversion with nickel/iron oxyhydroxide-modified hematite photoanodes: The role of Fe species in alkaline electrolyte

Recent trends in development of hematite (α-Fe2O3) as an efficient photoanode for enhancement of photoelectrochemical hydrogen production by solar water splitting

Key modification strategies for the rational design of hematite to promote photoelectrochemical water oxidation: a review of recent advances

Amorphous FeO x Overlayer Coupled with Co 3 O 4 Nanoparticles Passivating Hematite Photoanodes for Water Oxidation

Decorating the Cocatalyst Membrane with Coordinated Tannic Acid and Ternary Metal for Advancing Photoelectrochemical Performance of F-Doped Hematite Photoanodes

Deposition of FeOOH Layer on Ultrathin Hematite Nanoflakes to Promote Photoelectrochemical Water Splitting

Effect of oxygen concentration and distribution on holes transfer and photoelectrocatalytic properties in hematite

Single Atoms and Clusters Based Nanomaterials for Hydrogen Evolution, Oxygen Evolution Reactions, and Full Water Splitting