Industrial carnallite-waste for thermochemical energy storage application

V. Mamani,A. Gutiérrez,A.I. Fernández,S. Ushak

DOI: https://doi.org/10.1016/j.apenergy.2020.114738

IF: 11.2

2020-05-01

Applied Energy

Abstract:<p>The key to successful development and implementation of thermochemical storage systems is the identification of high energy density and low-cost storage materials. In this work, an industrial waste based on a double salt hydrate, coming from non-metallic mining was studied for thermochemical storage applications. Initially, chemical characterization was performed and determined that carnallite-waste material consists of 73.54 wt% of KCl·MgCl₂·6H₂O and impurities such as NaCl (23.04 wt%), KCl (1.76 wt%) and CaSO₄ (1.66 wt%). Using thermal analyses methods, the operating conditions such as temperatures and partial pressures, were optimized for seasonal thermochemical storage applications to P_Hy = 1.3 kPa and ϑ_Hy = 40 °C, and to P_De = 4.0 kPa and ϑ_De = 110 °C. Under these conditions, the reaction reversibility over 10 cycles (10 years) was significantly high, with only 8.5% decrease in chemical reversibility. Furthermore, the duration of dehydration and hydration isotherms was optimized to 15 and 360 min, respectively. Finally, 1.129 GJ/m³ energy storage density was calculated after the tenth cycle of hydration/dehydration for this material. Hence 7.1 m³ of carnallite was estimated to meet the demand of 8 GJ of energy for an average household during the six months of cold seasons. These results are comparable and competitive with an energy storage density of materials such as K₂CO₃ and MgCl₂, reported as promising for seasonal thermochemical storage applications. It should be noted that carnallite-waste material has no commercial value so far and its use contributes to developing sustainable low-cost thermochemical energy storage systems.</p>

energy & fuels,engineering, chemical