Abstract:As the smart grid involves more new technologies such as electric vehicles (EVs) and distributed energy resources (DERs), more attention is needed in research to general energy storage (GES) based energy management systems (EMS) that account for all possible load shifting and control strategies, specifically with major appliances that are projected to continue electrification such as the electric water heater (EWH). In this work, a methodology for a modified single-node model of a resistive EWH is proposed with improved internal tank temperature for user comfort modeling and capabilities for conservation voltage reduction (CVR) simulations as well as Energy Star and Consumer Technology Association communications protocol (CTA-2045) compliant controls, including energy storage calculations for "energy take". Daily and weekly simulations are performed on a representative IEEE test feeder distribution system with experimental load and hot water draw (HWD) profiles to consider user comfort. Sequential controls are developed to reduce power spikes from controls and lead to peak shavings. It is found that EWHs are suitable for virtual power plant (VPP) operation with sustainable tank temperatures, i.e., average water temperature is maintained at set-point or above at the end of the control period while shifting up to 78% of EWH energy out of shed windows per day and 75% over a week, which amounts to up to 23% of the total load shifted on the example power system. While CVR simulations reduced the peak power of individual EWHs, the aggregation effect at the distribution level negates this reduction in power for the community. The EWH is shown as an energy constant load without consistent benefit from CVR across the example community with low energy reductions of less than 0.1% and, in some cases, increased daily energy by 0.18%.

Data-Driven Modelling and Optimal Control of Domestic Electric Water Heaters for Demand Response

A Game-Theoretic Approach to Decentralized Control of Heterogeneous Load Population

Decentralized Control of Aggregated Loads for Demand Response

Optimal Control of Intelligent Electricity Consumption for Residential Customers Considering Demand Response

Large-Scale Modeling and DR Control of Electric Water Heaters With Energy Star and CTA-2045 Control Types in Distribution Power Systems

HVAC Scheduling for Demand Response in a Distributed CCHP System Considering Latent Load

Demand response optimization strategy of electric water heater based on RL

Optimized scheduling of electric water heaters under consideration of water-using time elasticity

A centralized demand response control strategy for domestic electric water heater group based on appliance cloud platform

Equivalent Electric and Heat-Pump Water Heater Models for Aggregated Community-Level Demand Response Virtual Power Plant Controls

Electric Water Heater Modeling for Large-Scale Distribution Power Systems Studies with Energy Storage CTA-2045 Based VPP and CVR

Trajectory tracking with an aggregation of domestic hot water heaters: Combining model-based and model-free control in a commercial deployment

Electric Water Heaters for Transactive Systems: Model Evaluations and Performance Quantification

Data-driven energy management in residential areas leveraging demand response

Influence of usage and model inaccuracies on the performance of smart hot water heaters: lessons learned from a demand response field test

Demand Response by Aggregates of Domestic Water Heaters with Adaptive Model Predictive Control

Deep Reinforcement Learning based Optimal Control of Hot Water Systems

Dispatching Potential Evaluation of Thermostatically Controlled Loads Based on Realistic Customer Electricity Data in China

Demand response of residential air conditioning load based on user behavior

Optimal Water Heater Control in Smart Home Environments

Model and Method of Demand Response for Thermostatically-controlled Loads Based on Cost-benefit Analysis