Abstract:This study investigated the metallurgical, mechanical properties and quality of coatings fabricated by direct laser metal deposition (DLMD) on Ti-6Al-4V, which were affected by the DLMD optimized process parameters. A 3-kW continuous wave ytterbium laser system (YLS) attached to a KUKA robot was used for the process. An analysis was conducted to determine the quality of the coatings in terms of hardness and wear resistance. Variables such as the time of interlayer deposition, thickness of the substrate, the initial temperature of the substrate, and the number of deposited layers were also investigated. The independent/collective effect that each process parameter had on the metallurgical and mechanical properties of the deposited Ti-6Al-4V were made clear when the processing parameters were varied. Minute pores/defects that significantly affect the metallurgical and mechanical properties of clads were also identified. The results obtained from the designed experiments showed that the depth of Heat Affected Zone (HAZ) was inversely proportional to the thickness of the substrate; as the thickness of the substrate was increased, the HAZ depth decreased. Moreover, the intensity of the laser power also affects the HAZ depth. In addition, it was discovered that the initial conditions of the substrate at room temperature also affected the coatings in relation to pre-heated conditions. The analysis conducted in identifying and quantifying the porosity showed indication that the factors such as scanning speed, laser power and powder feed rate had a predominant influence on the porosity. The grain form and structure as well as the mechanical properties of the cladded layer were significantly affected by the optimized process parameters of DLMD process. The parameters investigated had a significant impact on the hardness and wear resistance performance. Furthermore, the results revealed that the highest hardness of one of the coatings was 1.97-times the substrate which had a hardness value of 302 HV. The outstanding wear resistance performance of Al-Si-Sn-Cu/Ti-6Al-4V composite coating is attributed to major hard intermetallic phases.

Modeling and optimizing the laser parameters for corrosion resistance in 316 SS laser hardfaced surface using tungsten carbide

Developing an Empirical Relationship to Predict the Wear Characteristics of Ni-Based Hardfaced Deposits on Nuclear Grade 316LN Austenitic Stainless Steel

Design for Manufacturing of Cemented Carbide Coated Components Toward High Wear and Impact Resistance Performance

Combining Ultrafast Laser Texturing and Laser Hardening to Enhance Surface Durability by Improving Hardness and Wear Performance

Microstructures, wear and corrosion resistance of laser composite surfaced austenitic stainless steel (AISI 304 SS) with tungsten carbide

Corrosion and wear protection of AISI 4140 carbon steel using a laser-modified high-velocity oxygen fuel thermal sprayed coatings

Effect of Process Parameters on the Hardness of Laser Surface Textured 5A06 Aluminum Alloy

Computational and Experimental Investigation of Micro-Hardness and Wear Resistance of Ni-Based Alloy and TiC Composite Coating Obtained by Laser Cladding

Experimental Modeling, Statistical Analysis, and Optimization of the Laser-Cutting Process of Hardox 400 Steel

Wear and corrosion behaviors of high-power laser surface-cleaned 304L stainless steel

Laser surface modification of Ti--6Al--4V: wear and corrosion characterization in simulated biofluid

Thermodynamic Analysis and Experimental Study of Masked Corrosion Protection of 304 Stainless Steel Processed with Nanosecond Pulsed Laser

Data related to optimized process parameters influence on hardness, microstructural evolution and wear resistance performance of Al-Si-Sn-Cu/Ti-6Al-4V composite coatings

Effect of laser surface hardening on a low carbon steel substrate wear and hardness

Research on the Preparation Process and Performance of a Wear-Resistant and Corrosion-Resistant Coating

Corrosion–Cavitation Erosion Improvement of Marine Steel by High-Velocity Oxy-fuel-Sprayed Vanadium Carbide Coatings and Polytetrafluorethylene Topcoat

NUMERICAL MODEL FOR OPTIMIZING THE PARAMETERS FOR LASER-BEAM WELDING OF A HIGH-TEMPERATURE MATERIAL

The Effect of Laser Beam Processing on the Properties of WC-Co Coatings Deposited on Steel

Optimization of Process Parameters of Laser Cladding 304L Alloy Powder Based on Orthogonal Experiment

On the Optimization of Roughness and Corrosion Resistance of Laser Beam Powder Bed Fusion Fabricated Ti–6Al–4V Parts—An Electrochemical Approach

Improving the Wear Properties of AISI4130 Steel Using Laser Surface Hardening Treatment