Abstract:The conventional method (CM) for shear lag analysis of thin-walled box girders supposes that the neutral axis coincides with the centroidal axis of the whole cross section, and thus neglects the axial equilibrium condition. An analytical method considering axial equilibrium and shear deformation, which is referred to as PM, is proposed for overcoming the defect of the conventional method. The longitudinal displacement of the web is introduced to satisfy the axial equilibrium condition and locate the neutral axis automatically. The shear deformation is considered according to the Timoshenko beam theory. Three independent shear lag functions are adopted for describing different shear lag intensities of the top, bottom and cantilever slabs. The governing differential equations for the displacement variables are deduced by means of the virtual work theorem and solved with the relevant boundary conditions. The analytical solution is then derived for the distance from the neutral axis to the top fiber of the cross section. The accuracy of the proposed method is validated by comparisons with the available experimental data as well as the finite element analysis results. Moreover, the distances from the neutral axis to the top fiber, axial forces, and stress difference ratios are analyzed for typical thin-walled box girders to quantify the influence of the axial equilibrium condition. Finally, an extensive parametric study is conducted to examine the effects of various geometric parameters on the stress difference ratio under different load types. The results show that the proposed method can provide good predictions for both deflections and axial stresses, and neglecting axial equilibrium leads to considerable underestimations of axial stresses especially at the top flange-web junctions over the interior support of the continuous box girder.

Performance analysis of rocking shear wall‐frame structure

A SIMPLIFIED ANALYTICAL PROCEDURE FOR SEISMIC ANALYSIS OF TIMBER LIGHT-FRAME SHEAR WALLS

Analytical Model for Steel Frame-Reinforced Concrete Infill Slit Wall System

Analytical Theory of Composite Beams with CSWs Using the State Space Method

Efficient analysis of shear wall-frame structural systems

Elasto-Plastic Analysis Of Reinforced Concrete Shear Wall With Openings Using A Macro Model

Shear Lag Including Axial Balance of Box Beams by Finite Segment Model

Improved method for shear lag analysis of thin-walled box girders considering axial equilibrium and shear deformation

Static Elasto-Plastic Analysis of RC Shear Walls with One Row Openings

Analytical Model for Sheathing-to-Framing Connections in Wood Shear Walls and Diaphragms

Shear transfer mechanism of a multi-storied shear wall with peripheral members

Elasto-Plastic Seismic Shear Distributions of Frame-Wall Structures

Short- and Long-Term Analyses of Shear Lag in Rc Box Girders Considering Axial Equilibrium

A Distributed Parameter Model of Frame Pin-Supported Wall Structure

Numerical Modeling to Predict Seismic Performance of the Post-Tensioned Self-Centering Concrete Shear Walls

Cyclic Analysis of Wood Shear Walls

Applications of the multi-layer shell element in the finite element analysis of shear wall structures

Nonlinear Finite-Element Analysis of Double-Skin Steel-Concrete Composite Shear Wall Structures

Analytical Model for Predicting Shear Strength of Cold-Formed Thin-Walled Steel Reinforced Concrete Shear Walls

Nonlinear dynamic analysis of composite structure combined CFST frame with two-sided connection CSPSWs

A Macro Model of Shear Walls for Push-over Analysis