Abstract:The field test demonstrated that the treatment effect of air-boosted vacuum preloading was 5.7-21.8% higher than that of conventional vacuum preloading.The finite element parametric analysis revealed that an increase in the injection pressure, a decrease in the injection spacing and cyclic air injections can enhance the consolidation of soil.A simple and practical closed-form expression of considering various injection pressures, injection spacings, and injection cycles and durations was developed to estimate ground settlement for geotechnical engineering design.Vacuum preloading has been widely used to improve soft soils in coastal areas of China. An increasing amount of evidence from field operations has shown that conventional vacuum preloading is prone to clogging in prefabricated vertical drains (PVDs) and demands a large volume of sand fills. In recent years, air-boosted vacuum preloading has been developed to overcome these limitations; however, this method still requires more data to verify its performance. In this study, a field test for air-boosted vacuum preloading was conducted, and a large-strain two-dimensional (2D) finite element (FE) model was developed and validated against the field test data. Then, a series of FE parametric analyses was performed to assess key factors, i.e. the air injection pressure, the injection spacing, and the characteristics of cyclic injection, which affect the performance of the air-boosted vacuum preloading. The results showed that the ground settlement and lateral displacement of the soils increased due to an increase in the injection pressure, a decrease in the injection spacing, or increases in the number and duration of the injection cycles. Based on the parametric analyses, an empirical formula for ground settlement prediction was proposed and compared with a case history reported in the literature, showing good agreement.

Numerical analysis on ground improvement of vacuum preloading with prefabricated radiant drain

Model Test and Theoretical Analysis for Soft Soil Foundations Improved by Prefabricated Vertical Drains

Application and design method of dredging sludge ground treated via prefabricated radiant drain vacuum preloading

Consolidation Behavior of Soft Deposits Considering the Variation of Prefabricated Vertical Drain Discharge Capacity

Consolidation effect of prefabricated radiant drain vacuum preloading technology: A physical model case study

Experimental Tests on Effect of Deformed Prefabricated Vertical Drains in Dredged Soil on Consolidation Via Vacuum Preloading

Deformation Characteristics of Soil Between Prefabricated Vertical Drains under Vacuum Preloading

Solutions for Settlement and Consolidation of Soft Ground with Vacuum Preloading

Preloading Using Fill Surcharge and Prefabricated Vertical Drains for an Airport

Effect of spacing of grid PHD on performance of combined PHD-PVD vacuum preloading method for treatment of clayey slurry

Reply to the Discussion by Mesri and Kane on "new Approach of Vacuum Preloading with Booster Prefabricated Vertical Drains (pvds) to Improve Deep Marine Clay Strata"

Experimental Study on a Dredged Fill Ground Improved by a Two-Stage Vacuum Preloading Method

Study on Environmental Effect Induced by Vacuum Preloading and Its Control Method

Analysis of ground deformation development and settlement prediction by air-boosted vacuum preloading

Effect of Surcharge Loading Rate and Mobilized Load Ratio on the Performance of Vacuum–surcharge Preloading with PVDs

Estimation of Influence Scope of Lateral Displacement of Soft Ground under Vacuum Pressure with PVD

Analytical and numerical solutions for vacuum preloading considering a radius related strain distribution

Preliminary Study of Real-Time Pore Water Pressure Response and Reinforcement Mechanism of Air-Booster Vacuum Preloading Treated Dredged Slurry

Numerical Model of Soft Ground Improvement by Vertical Drain Combined with Vacuum Preloading

Vacuum Preloading Combined with Multiple-Flocculant Treatment for Dredged Fill Improvement

Calculation On The Settlement Of Dredged Slurry Treated By Vacuum Preloading Method With Consideration Of Clogging Effects