Abstract:Sulfate resistance of high-volume fly ash/cement mortars hybrid containing 0~1.5 wt.% of nano-silica (Nano-SiO2, NS) and 0~1.0 vol.% of polyvinyl alcohol (PVA) fibers was investigated in this study. Fly ash was replaced with Portland cement at levels of 60% by weight. The resistance to sulfate attack was investigated by exposing the mortars to 10 wt.% sodium sulfate (Na2SO4) solutions for 72 days, after which change in mass, compressive, and flexural strengths were determined. For comparison, the compressive and flexural strengths of cement mortar after 100 days of curing in water were also investigated. Microstructural deteriorations caused by sulfate attack were analyzed by using scanning electron microscope (SEM). The test results showed that the combination of NS and PVA fibers was effective in enhancing the mechanical properties and the resistance to sulfate attack. After 28 days curing, the hybrid addition of 1.5 wt.% NS and 1.0 vol.% PVA fibers increased the flexural strength by 90% over the control one without NS and PVA fiber. Moreover, regardless of PVA fibers content, due to the crystal nucleus and pore-filling effects, the adding of 0.5 wt.% NS increased the compressive strength by 67.1~118.2%. Chemical reaction took place between fly ash and Na2SO4 as no un-hydration particles could be observed in the samples immersed in Na2SO4 solutions for 72 days, while a lot of un-hydration fly ash particles could be found in the SEM image of mortar after 100 days curing in water. The chemical reaction production could increase the adhesive property and fill the pores of cement mortar. As a result, the compressive and flexural strengths of cement mortars after immersed in Na2SO4 solution for 72 days, were much higher than that after 28 days curing. Moreover, the compressive strength of mortars incorporating 1.0~1.5 wt.% NS was even higher than that after 100 days curing in water, indicating the combination of Nano-SiO2/PVA fiber is effective in enhancing the resistance to sulfate attack.

Effect of Sodium Sulfate Activator on Compressive Strength and Hydration of Fly-Ash Cement Pastes

Influence of calcium sulfate dihydrate as chemical activator on compressive strength of hardened fly ash-cement pastes

Activation and Toxicity of Slag-fly Ash-fluorgypsum Cementitious Material

Strength and Microstructural Characteristics of Activated Fly Ash–Cement Paste

The Effect of Blast Furnace Slag/Fly Ash Ratio on Setting, Strength, and Shrinkage of Alkali-Activated Pastes and Concretes

Effect of Nano-SiO2/PVA Fiber on Sulfate Resistance of Cement Mortar Containing High-Volume Fly Ash

Effects of Fly Ash Particle Size and Chemical Activators on the Hydration of High-Volume Fly Ash Mortars

Microstructure of Portland Cement Blended with High Dosage of Sewage Sludge Ash Activated by Na2SO4

Influence of Alkaline Activator on the Strength of Fly Ash-Cement Gel Sand Material

Effects of compound activators on the early mechanical properties of cement mortar incorporating large volume of fly ash

EXPERIMENTAL STUDY ON SODIUM SULFATE ATTACK ON MORTAR CONTAINING LIMESTONE POWDER AND FLY ASH AT EARLY AGE

The Effect of Mechanical Activation of Fly Ash on Cement-Based Materials Hydration and Hardened State Properties

Effect of activator on rheological properties of alkali-activated slag-fly ash pastes

Evaluation and beneficiation of high sulfur and high alkali fly ashes for use as supplementary cementitious materials in concrete

Hydration characteristics and hydration products of calcium sulfoaluminate cement and fly ash blended pastes

Effect of Class C and Class F Fly Ash on Early-Age and Mature-Age Properties of Calcium Sulfoaluminate Cement Paste

Influence of Alkali Activators on the Early Hydration of Cement-Based Binders under Steam Curing Condition

Strength characteristics of self-compacting concrete with alkali-activated fly ash

Effect of activator concentration on setting time, workability and compressive strength of sustainable concrete with alkali-activated slag binder

Effect of nanosilica on the compressive strength development and water absorption properties of cement paste and concrete containing Fly Ash

Effect of Solid Sodium Silicate on Workability, Hydration and Strength of Alkali-Activated GGBS/Fly Ash Paste