Abstract:Chemical processing is among the significant keys to tackle agro-residues utilization field, aiming to obtain value-added materials. Extraction of cellulose nanocrystals (CNCs) is an emerging route to valorize lignocellulosic wastes into high value particles. In this investigation, effect of acidic hydrolysis duration was monitored on size and morphology of obtained crystals; namely: CNCs from Nile roses fibers (NRFs) ( Eichhornia crassipes) . Different acidic hydrolysis duration range or different characterization techniques set this article apart from relevant literature, including our group research articles. The grinded NRFs were firstly subjected to alkaline and bleaching pretreatments, then acid hydrolysis process was carried out with varied durations ranging from 5 to 30 min. Microcrystalline cellulose (MCC) was used as reference for comparison with NRFs based samples. The extracted CNCs samples were investigated using various techniques such as scanning electron microscopy (SEM), Atomic force microscopy (AFM), Raman spectroscopy, and thermogravimetric (TGA) analysis. The figures gotten from SEM and AFM depicted that NRFs based CNCs appeared as fibril-like shapes, with reduced average size when the NRFs underwent pulping and bleaching processes. This was indicated that the elimination of hemicellulose and lignin components got achieved successfully. This outcome was proven by chemical composition measurements and TGA/DTG curves. On the other hand, AFM-3D images indicated that CNCs topology and surface roughness were mostly affected by increasing hydrolysis durations, besides smooth and homogeneous surfaces were noticed. Moreover, Raman spectra demonstrated that the particle size and crystallinity degree of NRFs based CNCs can be affected by acidic hydrolysis durations and optimum extraction time was found to be 10 min. Thermal stability of extracted CNCs-NRFs and CNCs-MCC was measured by TGA/DTG and the kinetic models were suggested to identify the kinetic parameters of the thermal decomposition of CNCs for each acid hydrolysis duration. Increasing hydrolysis duration promoted thermal stability, particularly for NRFs based CNCs. Results showcased in this article add new perspective to Nile rose nanocellulose and pave down the way to fabricate NRFs based humidity nano-sensors.

Characterization of cellulose nanocrystals extracted from El Diss and El Retma local plants and their dispersion in poly(vinyl alcohol-co-ethylene) matrix in the presence of borax

Advance Study of Cellulose Nanocrystals Properties and Applications

Adhesive Properties of Bio-Based Epoxy Resin Reinforced by Cellulose Nanocrystal Additives

Synergistic Impact of Cellulose Nanocrystals with Multiple Resins on Thermal and Mechanical Behavior

Characterization of cellulose nanowhiskers extracted from alfa fiber and the effect of their dispersion methods on nanocomposite properties

Valorization of Eichhornia crassipes for the production of cellulose nanocrystals further investigation of plethoric biobased resource

Cellulose nanocrystals from agricultural residues (Eichhornia crassipes): Extraction and characterization

Isolation and Characterization of Spherical Cellulose Nanocrystals Extracted from the Higher Cellulose Yield of the Jenfokie Plant: Morphological, Structural, and Thermal Properties

Isolation and Characterization of Cellulose Nanocrystals from Waste Cotton Fibers Using Sulfuric Acid Hydrolysis

Effect of different compatibilization routes on the mechanical, thermal and rheological properties of polypropylene/cellulose nanocrystals nanocomposites

Synthesis and characterization of nanocelluloses isolated through acidic hydrolysis and steam explosion of Gliricidia sepium plant fiber

Extraction and Characterization of Cellulose Nanocrystals from Brown Seaweed Dictyota Bartayresiana, J.V. Lamouroux

Wet‐Spun Alginate Monofilaments Reinforced With Cellulose Nanocrystals Obtained From Cotton Waste

Modification of cellulose nanocrystals with 2-carboxyethyl acrylate in the presence of epoxy resin to enhance its adhesive property

Silane compatibilzation to improve the dispersion, thermal and mechancial properties of cellulose nanocrystals in poly (ethylene oxide)

Preparation And Characterization Of Cellulose Nanocrystals From The Bio-Ethanol Residuals

Cellulose Nanocrystals: Dispersion in Co-Solvent Systems and Effects on Electrospun Polyvinylpyrrolidone Fiber Mats

Polymer-Decorated Cellulose Nanocrystals as Environmentally Friendly Additives for Olefin-Based Drilling Fluids

Surface treatment of cellulose nanocrystals (CNC): effects on dispersion rheology

Cellulose Nanocrystals and Nanofiber from Sub-Wear out Brazilian Semiarid Source for Biological Applications

Experiment and molecular dynamics simulation of functionalized cellulose nanocrystals as reinforcement in cement composites