Abstract:Selective laser melting (SLM) is an attractive additive manufacturing technique for fabricating high-performance superalloys engineering components. Unfortunately, these as-built parts generally exhibit unsatisfied mechanical properties because of their natural thermal residual stress and non-equilibrium microstructures. Ultrasonic shot peening (USP) can effectively inhibit defect expansion and even close pores, thereby improving the mechanical properties of alloys. In this study, the internal defects, residual stress and microhardness redistribution, tensile properties, as well as microstructural response of the GH3230 alloy treated by different ultrasonic peening time are systematically studied. USP treatment induces a significant carbides fragmentation and synthesizes surface gradient heterogeneous structure, which displays a microstructure gradient in grain size, carbides size and dislocation density from surface to core. Long-time USP treatment induces work softening of GH3230 alloys. The work softening mechanism of the GH3230 alloys after long-time USP treatment is ascribed to the increase of surface temperature and high stored strain energy. Both the microhardness and residual compressive stress in the softened region of GH3230 alloys are reduced. Work softening effect increases the surface plasticity of the GH3230 sample, which induces deeper gradient structure. The various strengthening mechanisms of gradient heterogeneous structures, as well as the multiple effects of hetero deformation induced (HDI) hardening, and densification strengthening are responsible for achieving strength-ductility synergy. The research findings provide new insights based on USP for improving the mechanical properties of heterogeneous superalloys engineering components.

Effects of Robotic Hammer Peening on Structural Properties of Ni-Based Single-Crystal Superalloy: Dislocation Slip Traces and Crystallographic Reorientations

Grinding- and robotic hammer peening-induced modifications in the near-surface regions of laser-cladded Inconel 718 coatings

Study of pre-precipitated 8 phase promoting deformation twinning and recrystallization behavior of Inconel 718 superalloy during hot compression

Effects of ultrasonic shot peening process on the microstructure and mechanical properties of nickel-based superalloys formed by selective laser melting

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

Surface characteristics and microstructure evolution of a nickel-base single crystal superalloy treated by ultrasonic shot peening

Analysis of Influence of Ultrasonic Shot Peening on Surface Plastic Behavior of Superalloy

Effect of Deformation Degree on Microstructure and Properties of Ni-Based Alloy Forgings

Effect of dynamic recrystallization on texture orientation and grain refinement of Ti6Al4V titanium alloy subjected to laser shock peening

Quantification of room temperature strengthening of laser shock peened Ni-based superalloy using synchrotron microdiffraction

Nanoscale microstructural factors contributing to the improvement of the micromechanical wear properties of mechanical shot-peened nickel-based superalloys

Effect of laser shock peening on the tensile behavior and notch sensitivity of Ni-based single-crystal superalloy

Impact on Mechanical Properties and Microstructural Response of Nickel-Based Superalloy GH4169 Subjected to Warm Laser Shock Peening

Investigations on surface modification of nickel-based superalloy subjected to ultrasonic surface rolling process

Investigation of High-Temperature Recovery and Recrystallization Behavior in a Single Crystal Ni-Based Superalloy Treated with Shot Peening and Laser Peening

Comparison of surface integrity of GH4169 superalloy after high-energy, low-energy, and femtosecond laser shock peening

Microstructure Evolution, Hardness, and Tribological Behaviors of Ti-50.8Ni SMA Alloy with Ultrasonic Surface Shot Peening Treatment

Effect of ultrasonic shot peening duration on the microstructure and mechanical properties of CrMnFeCoNi high-entropy alloy

Plastic Deformation and Recrystallization of a Ni-Based Single Crystal Superalloy

Effect of Warm Laser Shock Peening on the Low-Cycle Fatigue Behavior of DD6 Nickel-Based Single-Crystal Superalloy