Abstract:Cement production emits a large amount of CO 2 into the atmosphere and consumes significant mineral resources, necessitating urgent green transformation in this traditional industry. To address carbon emissions in the building materials sector and effectively utilize industrial solid waste, this study presents the preparation of geopolymer mortar using a ternary mixture of fly ash (FA), slag (GGBS) and red mud (RM), making full use of the advantages of each component to optimize the mix proportion. The mix proportions are determined using the simplex-centroid experimental design method, with NaOH concentration (8 M, 10 M, 12 M) as the independent variable, aiming to meet multi-objective performance requirements including fluidity, setting time, flexural strength, and compressive strength. The microstructure and composition of hydration products are examined through scanning electron microscopy (SEM) and X-ray diffraction (XRD). Finally, the optimal mix proportion range is proposed. Results indicate that: (1) When the concentration of NaOH increases, the setting time is shortened, and the mechanical properties first increase and then decrease. The optimal alkali concentration is 10 mol/L. (2) RM and FA exhibit similar effects on mechanical properties, suggesting RM can replace FA in geopolymer material preparation. Besides, RM significantly reduces fluidity. (3) GGBS enhances mechanical properties and shortens setting time. The increase of GGBS content provides more CaO for the matrix and generates more compact C-S-H gel, and thus, the flexural strength and compressive strength of the geopolymer mortar are improved. When GGBS blending amount is 50 % and NaOH is 10 M, the flexural strength and compressive strength of mortar can reach 15.66 MPa and 69.06 MPa, respectively. (4) The simplex-centroid experimental design method provides a mix proportion design method that can meet the requirements of multiple properties at the same time.

Feasibility study of red mud for geopolymer preparation: effect of particle size fraction

Feasibility study of red mud-blast furnace slag based geopolymeric grouting material: Effect of superplasticizers

Effects of Red Mud on Workability and Mechanical Properties of Autoclaved Aerated Concrete (AAC)

Preparation and Research on Mechanical Properties of Eco-Friendly Geopolymer Grouting Cementitious Materials Based on Industrial Solid Wastes

Synthesis, Characterization, and Mechanical Properties of Red Mud–Based Geopolymers

Preparation mechanism and properties of thermal activated red mud and its geopolymer repair mortar

Geopolymerization of Red Mud and Rice Husk Ash and Potentials of the Resulting Geopolymeric Products for Civil Infrastructure Applications

Mechanical properties and microstructure of red mud-coal metakaolin geopolymer concrete based on orthogonal tests

Preparation and Properties of Porous Concrete Based on Geopolymer of Red Mud and Yellow River Sediment

Preparation of geopolymer concrete with Bayer red mud and its reaction mechanism

Synthesis Factors Affecting Mechanical Properties, Microstructure, and Chemical Composition of Red Mud–fly Ash Based Geopolymers

A Comprehensive Review on Red Mud-based Geo-polymerase a Sustainable Material

Preparation and performance optimization of fly ash- slag- red mud based geopolymer mortar: Simplex-centroid experimental design method

Synthesis and Characterization of Red Mud and Rice Husk Ash-Based Geopolymer Composites

Effect of waste glass powder on the properties of geopolymer planting concrete in Bayer process red mud base

Interfacial Behavior of Slag, Fly Ash, and Red Mud-Based Geopolymer Mortar with Concrete Substrate: Mechanical Properties and Microstructure

Effect of Red Mud on Mechanical Properties of Loess–Containing Aluminosilicate Based Cementitious Materials

Mechanical Properties of Geopolymers Synthesized from Fly Ash and Red Mud under Ambient Conditions

Mechanical Properties and Mechanism of Geopolymer Cementitious Materials Synergistically Prepared Using Red Mud and Yellow River Sand

Effects of Different Silicon Sources on the Properties of Geopolymer Planting Concrete Mixed with Red Mud

The Strength and Microstructure of Two Geopolymers Derived from Metakaolin and Red Mud-Fly Ash Admixture: A Comparative Study