Guidance for quantitative confocal microscopy

James Jonkman,Claire M. Brown,Graham D. Wright,Kurt I. Anderson,Alison J. North

DOI: https://doi.org/10.1038/s41596-020-0307-7

IF: 14.8

2020-03-31

Nature Protocols

Abstract:Nature Protocols, Published online: 31 March 2020; doi:10.1038/s41596-020-0307-7Guidance for quantitative confocal microscopy

biochemical research methods

What problem does this paper attempt to address?

Tutorial: guidance for quantitative confocal microscopy

James Jonkman,Claire M. Brown,Graham D. Wright,Kurt I. Anderson,Alison J. North

DOI: https://doi.org/10.1038/s41596-020-0313-9

IF: 14.8

2020-03-31

Nature Protocols

Abstract:When used appropriately, a confocal fluorescence microscope is an excellent tool for making quantitative measurements in cells and tissues. The confocal microscope's ability to block out-of-focus light and thereby perform optical sectioning through a specimen allows the researcher to quantify fluorescence with very high spatial precision. However, generating meaningful data using confocal microscopy requires careful planning and a thorough understanding of the technique. In this tutorial, the researcher is guided through all aspects of acquiring quantitative confocal microscopy images, including optimizing sample preparation for fixed and live cells, choosing the most suitable microscope for a given application and configuring the microscope parameters. Suggestions are offered for planning unbiased and rigorous confocal microscope experiments. Common pitfalls such as photobleaching and cross-talk are addressed, as well as several troubling instrumentation problems that may prevent the acquisition of quantitative data. Finally, guidelines for analyzing and presenting confocal images in a way that maintains the quantitative nature of the data are presented, and statistical analysis is discussed. A visual summary of this tutorial is available as a poster (https://doi.org/10.1038/s41596-020-0307-7).

biochemical research methods
Advances of Confocal Microscopy in Three-Dimensional Surface Topography Measurement

Yueying Wang,Xu Liu,Xiang Hao

DOI: https://doi.org/10.3788/LOP230533

2023-01-01

Laser & Optoelectronics Progress

Abstract:With the rapid development of precision instrument manufacturing and semiconductor processing industry, the observation and measurement of micro-structure surface profile has become an important orientation of scientific research. Laser scanning confocal microscopy becomes popular in three-dimensional (3D) surface topography because of its high resolution, high signal- to-noise ratio, and excellent optical sectioning ability. In this paper, we first introduce the basic principle of the confocal microscopy. Further, various confocal microscopic methods used in 3D surface topography measurement are reviewed, including different scanning methods, different detection methods, and different spectral- based confocal imaging methods. Finally, the future developments of confocal microscopy are also prospected.
High-Sensitivity Quantitative Phase Microcopy

Renjie Zhou,Cuifang Kuang,Poorya Hosseini,Ravi Chowdhary,Zahid Yaqoob,Peter T. C. So

DOI: https://doi.org/10.1117/12.2212849

2016-01-01

Abstract:In the past decade, various quantitative phase microscopy (QPM) techniques have emerged, driven by the need to study biological samples non-invasively. However, the fundamental limit for phase noise is scarcely discussed in the literature. In a typically off-axis phase microscope system, the phase noise is limited to a few milliradians using a moderate camera. Common-path QPMs offer much reduced phase noise compared to typical Mach-Zehnder-based systems. However, further scaling down the phase noise becomes difficult. Here we propose a high-sensitivity common-path QPM that promises to reduce the phase noise by a factor of 10 (assuming the mechanical noise is negligible). This is achieved by a specifically designed signal filter, leaving only the subtle phase fluctuations coming from the dynamics sample scattering. By working at photon shot-noise limited detection, we can magnify the subtle phase contrast which is proportional to the camera well depth. We expect this system to have the height sensitivity similar to an atomic force microcopy, while measuring biological structures with a full field of view in a single-shot. We plan to use this system to study cell dynamics, particularly lamellipodial height fluctuations as well as stiffer cell membrane fluctuations.
High-sensitivity Quantitative Phase Microcopy (conference Presentation)

Renjie Zhou,Cuifang Kuang,Poorya Hosseini,Ravi Chowdhary,Zahid Yaqoob,Peter T. C. So

DOI: https://doi.org/10.1117/12.2212849

2016-01-01

Abstract:In the past decade, various quantitative phase microscopy (QPM) techniques have emerged, driven by the need to study biological samples non-invasively. However, the fundamental limit for phase noise is scarcely discussed in the literature. In a typically off-axis phase microscope system, the phase noise is limited to a few milliradians using a moderate camera. Common-path QPMs offer much reduced phase noise compared to typical Mach-Zehnder-based systems. However, further scaling down the phase noise becomes difficult. Here we propose a high-sensitivity common-path QPM that promises to reduce the phase noise by a factor of 10 (assuming the mechanical noise is negligible). This is achieved by a specifically designed signal filter, leaving only the subtle phase fluctuations coming from the dynamics sample scattering. By working at photon shot-noise limited detection, we can magnify the subtle phase contrast which is proportional to the camera well depth. We expect this system to have the height sensitivity similar to an atomic force microcopy, while measuring biological structures with a full field of view in a single-shot. We plan to use this system to study cell dynamics, particularly lamellipodial height fluctuations as well as stiffer cell membrane fluctuations.
A Novel Method for Enhancing the Lateral Resolution and Image SNR in Confocal Microscopy

Youhua Chen,Dazhao Zhu,Yue Fang,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1016/j.optcom.2017.04.073

IF: 2.4

2017-01-01

Optics Communications

Abstract:There is always a tradeoff between the resolution and the signal-to-noise ratio (SNR) in confocal microscopy. In particular, the pinhole size is very important for maintaining a balance between them. In this paper, we propose a method for improving the lateral resolution and image SNR in confocal microscopy without making any changes to the hardware. By using the fluorescence emission difference (FED) approach, we divide the images acquired by different pinhole sizes into one image acquired by the central pinhole and several images acquired by ring-shaped pinholes. Then, they are added together with the deconvolution method. Simulation and experimental results for fluorescent particles and cells show that our method can achieve a far better resolution than a large pinhole and a higher SNR than a small pinhole. Moreover, our method can improve the performance of classic confocal laser scanning microscopy (CLSM) to a certain extent, especially CLSM with a continuously variable pinhole.
Optimization for Imaging Through Scattering Media for Confocal Microscopes with Divided Elliptical Apertures.

Hengjie Tang,Chenxue Wu,Wei Gong,Yao Zheng,Xinpei Zhu,Jiahao Wang,Ke Si

DOI: https://doi.org/10.1002/jbio.201700293

IF: 3.3899

2018-01-01

Journal of Biophotonics

Abstract:We develop a confocal system equipped with optimal elliptical apertures to improve axial point spread function and signal-to-background ratio (SBR) for different detector sizes. By adjusting the parameters of the elliptical apertures, the axial half width at half-maximum can be reduced to 4.986 (described in optical coordinates) and SBR can be improved to 0.176. We evaluate this system with the 1951 USAF resolution test chart and the primary cultured neuron from SD rat stained by Map-2, and observe better imaging performance, which indicates the potential applications in biological science.
Improvements with Divided Cosine-Shaped Apertures in Confocal Microscopy

Chenxue Wu,Yao Zheng,Lejia Hu,Jiahao Wang,Wei Gong,Ke Si

DOI: https://doi.org/10.1016/j.optcom.2019.03.008

IF: 2.4

2019-01-01

Optics Communications

Abstract:Confocal microscopy is now widely used in biological science for its high resolution and optical sectioning capability. Here we introduce the divided cosine-shaped apertures to further improve its spatial resolution and signal-to-background ratio (SBR). The results show that by adjusting the distribution frequency of cosineshaped apertures, the axial half width at half maximum (HWHM) can be improved up to 13.5% compared with conventional circular apertures and 11.0% compared with D-shaped apertures. The transverse HWHM can be also improved. Besides, the SBR can be improved up to 12.2% compared with conventional circular apertures and 9.9% compared with D-shaped apertures. With the better performance and simple configuration, this technique shows great potential for imaging in scattering media.
Interpretation of Confocal ISO 21073: 2019 confocal microscopes: Optical data of fluorescence confocal microscopes for biological imaging- Recommended Methodology for Quality Control

Glyn Nelson,Laurent Gelman,Orestis Faklaris,Roland Nitschke,Alex Laude

DOI: https://doi.org/10.48550/arXiv.2011.08713

2020-11-19

Abstract:The performance of a confocal imaging system may be no better than a general-purpose widefield system if it is not properly maintained or quality controlled. The publication of ISO 21073, 'Confocal microscopes- Optical data of fluorescence confocal microscopes for biological imaging', set a standard for the minimal Quality Control (QC) that should be performed for Confocal Microscopes. Here we describe methodology for performing the QC requirements to satisfy ISO 21073, as well as suggesting other QC methods that should be performed to obtain a minimum level of information about the microscope system.

Other Quantitative Biology
Confocal Microscopy: Principles and Modern Practices

Amicia D. Elliott

DOI: https://doi.org/10.1002/cpcy.68

2019-12-26

Current Protocols in Cytometry

Abstract:<p>In light microscopy, illuminating light is passed through the sample as uniformly as possible over the field of view. For thicker samples, where the objective lens does not have sufficient depth of focus, light from sample planes above and below the focal plane will also be detected. The out‐of‐focus light will add blur to the image, reducing the resolution. In fluorescence microscopy, any dye molecules in the field of view will be stimulated, including those in out‐of‐focus planes. Confocal microscopy provides a means of rejecting the out‐of‐focus light from the detector such that it does not contribute blur to the images being collected. This technique allows for high‐resolution imaging in thick tissues.</p><p>In a confocal microscope, the illumination and detection optics are focused on the same diffraction‐limited spot in the sample, which is the only spot imaged by the detector during a confocal scan. To generate a complete image, the spot must be moved over the sample and data collected point by point. A significant advantage of the confocal microscope is the optical sectioning provided, which allows for 3D reconstruction of a sample from high‐resolution stacks of images. Several types of confocal microscopes have been developed for this purpose, and each has different advantages and disadvantages. This article provides a concise introduction to confocal microscopy. © 2019 by John Wiley & Sons, Inc.</p>
Quantitative Colocalization Analysis of Multicolor Confocal Immunofluorescence Microscopy Images: Pushing Pixels to Explore Biological Phenomena

Vadim Zinchuk,Olga Zinchuk,Teruhiko Okada

DOI: https://doi.org/10.1267/ahc.07002

2007-01-01

ACTA HISTOCHEMICA ET CYTOCHEMICA

Abstract:Quantitative colocalization analysis is an advanced digital imaging tool to examine antigens of interest in immunofluorescence images obtained using confocal microscopes. It employs specialized algorithms to estimate the degree of overlap of fluorescence signals and thus enables acquiring important new information not otherwise obtainable using qualitative approaches alone. As raw confocal images have high levels of background, they should be prepared to become suitable for reliable calculation of colocalization coefficients by correcting it. We provide concise theoretical basis of quantitative colocalization analysis, discuss its limitations, and describe proper use of the technique. The use of quantitative colocalization analysis is demonstrated by studying bile salt export pump and multidrug resistance associated protein 2 in the liver and major basic protein and platelet activating factor receptor antigens in conjunctiva. The review is focused on the applicability and correct interpretation of the results of colocalization coefficients calculations.

cell biology
Basic confocal microscopy

Carolyn L Smith

DOI: https://doi.org/10.1002/9780471729259.mc02c01s01

Abstract:This unit introduces the reader to the basic principles of confocal microscopy and the design and capabilities of current confocal microscopes. The advantages and disadvantages of confocal microscopy as compared to other techniques for fluorescence imaging are described. There are also practical guidelines for sample preparation and optimizing imaging parameters and examples of some of the applications of confocal microscopy.
Pixelation with concentration-encoded effective photons for molecular optical sectioning microscopy

Geng Wang,Rishyashring R. Iyer,Janet E. Sorrells,Edita Aksamitiene,Eric J. Chaney,Carlos A. Renteria,Jaena Park,Jindou Shi,Yi Sun,Stephen A. Boppart,Haohua Tu

2023-07-11

Abstract:Quality control in molecular optical sectioning microscopy is indispensable for transforming acquired digital images from qualitative descriptions to quantitative data. Although numerous tools, metrics, and phantoms have been developed, accurate quantitative comparisons of data from different microscopy systems with diverse acquisition conditions remains a challenge. Here, we develop a simple tool based on an absolute measurement of bulk fluorophore solutions with related Poisson photon statistics, to overcome this obstacle. Demonstrated in a prototypical multiphoton microscope, our tool unifies the unit of pixelated measurement to enable objective comparison of imaging performance across different modalities, microscopes, components/settings, and molecular targets. The application of this tool in live specimens identifies an attractive methodology for quantitative imaging, which rapidly acquires low signal-to-noise frames with either gentle illumination or low-concentration fluorescence labeling.

Optics,Biological Physics
Methods to calibrate and scale axial distances in confocal microscopy as a function of refractive index

Thijs Herman Besseling,Jissy Jose,Alfons van Blaaderen

DOI: https://doi.org/10.48550/arXiv.1404.3952

2014-04-15

Abstract:Accurate distance measurement in 3D confocal microscopy is important for quantitative analysis, volume visualization and image restoration. However, axial distances can be distorted by both the point spread function and by a refractive-index mismatch between the sample and immersion liquid, which are difficult to separate. Additionally, accurate calibration of the axial distances in confocal microscopy remains cumbersome, although several high-end methods exist. In this paper we present two methods to calibrate axial distances in 3D confocal microscopy that are both accurate and easily implemented. With these methods, we measured axial scaling factors as a function of refractive-index mismatch for high-aperture confocal microscopy imaging. We found that our scaling factors are almost completely linearly dependent on refractive index and that they were in good agreement with theoretical predictions that take the full vectorial properties of light into account. There was however a strong deviation with the theoretical predictions using (high-angle) geometrical optics, which predict much lower scaling factors. As an illustration, we measured the point-spread-function of a point-scanning confocal microscope and showed that an index-matched, micron-sized spherical object is still significantly elongated due to this PSF, which confirms that single micron-sized spheres are not well suited to determine accurate axial calibration nor axial scaling.

Soft Condensed Matter,Optics
Three-dimensional confocal reflectance microscopy for surface metrology

Chang-Soo Kim,Hongki Yoo

DOI: https://doi.org/10.1088/1361-6501/ac04df

IF: 2.398

2021-06-21

Measurement Science and Technology

Abstract:Confocal microscopy uses a confocal aperture in front of a detector to eliminate out-of-focus blur, providing optical sectioning, high spatial resolution, and high contrast. It enables precise three-dimensional (3D) reconstruction of a sample surface. Using objective lenses with high numerical aperture and short wavelength illumination, confocal microscopy offers high spatial resolution in both lateral and axial directions in a non-destructive and non-contact manner. These qualities make confocal microscopy an ideal tool for the inspection and measurement of microscopic samples. One of the limitations of confocal microscopy for 3D surface metrology, however, is its speed. Both lateral and axial scanning is needed to produce a stack of two-dimensional images along the height, and this takes more time. While high-end confocal laser scanning microscopy can acquire a 3D sample surface within a few seconds, an even faster imaging speed is required in some applications, such as in in-line inspection. Various techniques have been proposed to speed up 3D confocal measurements, such as chromatic confocal microscopy, differential confocal microscopy, dual-detection confocal microscopy, and direct-view confocal microscopy. Here, we review the basic principles, theories, scanning methods, and progress of confocal microscopy for surface metrology, and we discuss the latest progress in the field of ultrafast 3D surface measurement. We anticipate that confocal microscopy, which has become one of the standard metrology tools, will continue to evolve for 3D surface measurement.

engineering, multidisciplinary,instruments & instrumentation
Utilizing quantitative phase microscopy to localize fluorescence in three dimensions via the transport of intensity equation

Deven K Gupta,Robert Highland,David A Miller,Adam Wax

DOI: https://doi.org/10.1364/OL.532991

2024-08-01

Abstract:We demonstrate the use of a novel, to the best of our knowledge, localization algorithm for digitally refocusing fluorescence images from a three-dimensional cell culture. Simultaneous phase and fluorescence intensity images are collected through a multimodal system that combines digital holography via quantitative phase microscopy (QPM) and fluorescence microscopy. Defocused fluorescence images are localized to a specific z-plane within the three-dimensional (3D) matrix using the transport of intensity equation (TIE) and depth-resolved information derived from the QPM measurements. This technique is applied to cells stained with different fluorescent tags suspended in 3D collagen hydrogel cultures. Experimental findings demonstrate the localization of defocused images, facilitating the analysis and comparison of cells within the hydrogel matrix. This method holds promise for comprehensive cellular imaging of fluorescence labeling in three-dimensional environments, enabling detailed investigations into cellular behavior and interactions.
Optical Sectioning and Confocal Imaging and Analysis in the Transmission Electron Microscope

Peter D. Nellist,Peng Wang

DOI: https://doi.org/10.1146/annurev-matsci-070511-155016

2012-01-01

Abstract:Aberration correction in the transmission electron microscope has led to a reduction in the depth of focus for imaging. The depth of focus in a state-of-the-art scanning transmission electron microscope system, which is currently just a few nanometers, creates an opportunity to explore the three-dimensional structure of a sample by focusing on specific layers, an approach known as optical sectioning. In this article, we review the performance of optical sectioning in the scanning transmission electron microscope. Limitations in the simple optical sectioning approach are used to motivate discussion of confocal electron microscopy. Three imaging modes in scanning confocal electron microscopy have been investigated both theoretically and experimentally, and are reviewed here. The method of implementing a confocal arrangement in a microscope is discussed, along with its comparative performance with other methods for three-dimensional imaging and analysis. Finally, current and future potential applications are discussed.
Modern Laser Scanning Confocal Microscopy

Peter O. Bayguinov,Dennis M. Oakley,Chien‐Cheng Shih,Daniel J. Geanon,Matthew S. Joens,James A. J. Fitzpatrick,Chien-Cheng Shih

DOI: https://doi.org/10.1002/cpcy.39

2018-06-20

Current Protocols in Cytometry

Abstract:Since its commercialization in the late 1980's, confocal laser scanning microscopy (CLSM) has since become one of the most prevalent fluorescence microscopy techniques for three-dimensional structural studies of biological cells and tissues. The flexibility of the approach has enabled its application in a diverse array of studies, from the fast imaging of dynamic processes in living cells, to meticulous morphological analyses of tissues, and co-localization of protein expression patterns. In this chapter, we introduce the principles of confocal microscopy and discuss how the approach has become a mainstay in the biological sciences. We describe the components of a CLSM system and assess how modern implementations of the approach have further expanded the use of the technique. Finally, we briefly outline some practical considerations to take into account when acquiring data using a CLSM system. © 2018 by John Wiley & Sons, Inc.
Accessible quantitative phase imaging in confocal microscopy with sinusoidal-phase synthetic optical holography

Arturo Canales-Benavides,Yue Zhuo,Andrea M Amitrano,Minsoo Kim,Raul I Hernandez-Aranda,P Scott Carney,Martin Schnell

DOI: https://doi.org/10.1364/AO.58.000A55

2019-04-01

Abstract:We present a technically simple implementation of quantitative phase imaging in confocal microscopy based on synthetic optical holography with sinusoidal-phase reference waves. Using a Mirau interference objective and low-amplitude vertical sample vibration with a piezo-controlled stage, we record synthetic holograms on commercial confocal microscopes (Nikon, model: A1R; Zeiss: model: LSM-880), from which quantitative phase images are reconstructed. We demonstrate our technique by stain-free imaging of cervical (HeLa) and ovarian (ES-2) cancer cells and stem cell (mHAT9a) samples. Our technique has the potential to extend fluorescence imaging applications in confocal microscopy by providing label-free cell finding, monitoring cell morphology, as well as non-perturbing long-time observation of live cells based on quantitative phase contrast.

Optics,Biological Physics
High-resolution label-free imaging of tissue morphology with confocal phase microscopy

Martin Schnell,Shravan Gupta,Tomasz P. Wrobel,Michael G. Drage,Rohit Bhargava,P. Scott Carney

DOI: https://doi.org/10.1364/OPTICA.395363

2020-03-06

Abstract:Label-free imaging approaches seek to simplify and augment histopathologic assessment by replacing the current practice of staining by dyes to visualize tissue morphology with quantitative optical measurements. Quantitative phase imaging (QPI) operates with visible/UV light and thus provides a resolution matched to current practice. Here we introduce and demonstrate confocal QPI for label-free imaging of tissue sections and assess its utility for manual histopathologic inspection. Imaging cancerous and normal adjacent human breast and prostate, we show that tissue structural organization can be resolved with high spatial detail comparable to conventional H&E stains. Our confocal QPI images are found to be free of halo, solving this common problem in QPI. We further describe and apply a virtual imaging system based on Finite-Difference Time-Domain (FDTD) calculations to quantitatively compare confocal with wide-field QPI methods and explore performance limits using numerical tissue phantoms.

Medical Physics,Biological Physics,Optics
Confocal microscopy: principles and applications to the field of reproductive biology.

Daniela Nogueira,Karine Reynaud,R. Cortvrindt,Rafał Kurzawa,Johan Smitz

Folia Histochemica et Cytobiologica

Abstract:Confocal microscopy allows analysis of fluorescent labeled thick specimens without physical sectioning. Optical sections are generated by eliminating out-of-focus fluorescence and displayed as digitalized images. It allows 3-dimensional reconstruction (XYZ) and time-analysis (XYT), thus providing unique chance to link morphology with cell function. Since images are obtained by scanning, excess illumination of the specimen and quick decrease of the fluorescent signal are avoided. Resolution obtained with a Laser Scanning Confocal Microscopy (LSCM) is theoretically better than that of a conventional microscope. The preparation of the specimen may be based on standard techniques, such as immunocytochemistry applied to fixed cells, or on staining of living cells, following the use of different fluorescent probes at the same time (colocalization). In our laboratory, we use the LSCM system Fluoview version 2.1 (Olympus) to study reproductive biology of animals and humans. We work on stainings of oocytes and blastocysts (mouse, bovine, human), and human ovarian tissues. We study mitochondrial distribution, cortical granule migration, calcium oscillations and spindle quality to link culture conditions and oocyte quality. Staining of F-actin is used to check transzonal projections (in zona pellucida) or to detect abnormalities following experimental treatment. Blastocyst quality is analyzed in sequential optical sections for microfilament organization and counting of total cell number (staining with phalloidin (actin) and picogreen (DNA). Trophectoderm and inner cell mass distribution (differential staining), apoptotic cells (TUNEL method) and viable cells (live/dead test) are also evaluated. Confocal imaging can be helpful for rapid determination of follicle density (staining with AM Calcein) and follicle morphology (picogreen) in ovarian cortical biopsies. The current review describes the principles of confocal microscopy and illustrates its applications to the field of reproductive biology by a large collection of pictures.

Chemistry,Biology,Medicine

Guidance for quantitative confocal microscopy

Tutorial: guidance for quantitative confocal microscopy

Advances of Confocal Microscopy in Three-Dimensional Surface Topography Measurement

High-Sensitivity Quantitative Phase Microcopy

High-sensitivity Quantitative Phase Microcopy (conference Presentation)

A Novel Method for Enhancing the Lateral Resolution and Image SNR in Confocal Microscopy

Optimization for Imaging Through Scattering Media for Confocal Microscopes with Divided Elliptical Apertures.

Improvements with Divided Cosine-Shaped Apertures in Confocal Microscopy

Interpretation of Confocal ISO 21073: 2019 confocal microscopes: Optical data of fluorescence confocal microscopes for biological imaging- Recommended Methodology for Quality Control

Confocal Microscopy: Principles and Modern Practices

Quantitative Colocalization Analysis of Multicolor Confocal Immunofluorescence Microscopy Images: Pushing Pixels to Explore Biological Phenomena

Basic confocal microscopy

Pixelation with concentration-encoded effective photons for molecular optical sectioning microscopy

Methods to calibrate and scale axial distances in confocal microscopy as a function of refractive index

Three-dimensional confocal reflectance microscopy for surface metrology

Utilizing quantitative phase microscopy to localize fluorescence in three dimensions via the transport of intensity equation

Optical Sectioning and Confocal Imaging and Analysis in the Transmission Electron Microscope

Modern Laser Scanning Confocal Microscopy

Accessible quantitative phase imaging in confocal microscopy with sinusoidal-phase synthetic optical holography

High-resolution label-free imaging of tissue morphology with confocal phase microscopy

Confocal microscopy: principles and applications to the field of reproductive biology.