Abstract:As wind turbines become larger and move into deeper sea, their operating environment worsen. The torque fluctuation inside the drive chain is aggravated, which leads to the premature failure of the wind turbines. To improve the transmission stability of wind turbines, the mechanical-hydraulic hybrid transmission system (MHHTS) has been applied. However, existing research has issues with structure and hydraulic control. An MHHTS structure was proposed to meet the requirements of structural simplicity and high efficiency, corresponding to the design principles summarized in the article. Based on this structure, we have selected a hydraulic control mode, the constant displacement pump variable displacement motor (CPVM), that satisfies the reasonable utilization of displacement and the stability of control. This mode was chosen by comparing the displacement and pressure variation rules of three hydraulic control modes that meet the maximum power point tracking (MPPT) control principle of the wind turbine. In this study a co-simulation model of a 10 MW MHHTS wind turbine was built using Simulink and AMEsim. The correctness of the structural and control mode ware verified by co-simulation with a uniformly varying wind. Moreover, a method that can suppress fluctuations in output power by controlling the motor displacement was proposed. Different-step winds response analyses were conducted to explore the relationship between the displacement response speed and the output power fluctuations. The non-linear relationship between the displacement and the wind speed can also have an impact on the previous relationship. Finally, the feasibility of the control method was verified through simulation of an actual turbulent wind. These achievements should guarantee the future application of the novel transmission system in wind turbines.

Review of the application of hydraulic technology in wind turbine

Review of hydraulic transmission technologies for wave power generation

Application and analysis of hydraulic wind power generation technology

A review of energy storage technologies in hydraulic wind turbines

An Overview of Hydraulic Systems in Wave Energy Application in China

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

Hybrid Power Transmission Technology in a Wind Turbine Generation System

Research on an Integrated Hydrostatic-Driven Electric Generator with Controllable Load for Renewable Energy Applications

A Novel Hydraulic Transmission Solution to Large Offshore Wind Turbine: Design and Control Strategy

Analysis and Comparison of Medium Voltage High Power DC/DC Converters for Offshore Wind Energy Systems

APPLICATION AND SIMULATION OF POWER SPLIT IN HYBRID TRANSMISSION WIND TURBINES

Study on Speed and Torque Control of a Novel Hydromechanical Hybrid Transmission System in Wind Turbine

STUDY ON OPERATION MECHANISM OF A NEW TYPE ELECTRO-HYDRAULIC GENERATOR APPLIED IN WIND POWER GENERATION SYSTEM

MODELING AND SIMULATION OF WIND-WAVE ENERGY HYBRID POWER SYSTEM BASED ON HYDRAULIC TRANSMISSION

Improving the Reliability and Energy Production of Large Wind Turbine with a Digital Hydrostatic Drivetrain

Research Status and Developing Prospect of Offshore Wind Farm With Pure DC Systems

Tidal Current Turbine Based on Hydraulic Transmission System

A Novel Hydraulic-Mechanical Hybrid Transmission in Tidal Current Turbines

The Hydraulic Pitch-Controlled Technology Of Wind Turbine

Research on Transmission Characteristics and Torsional Vibration Control of Hybrid Transmission Wind Turbines

Fault Analysis of Wind Turbines in China