Corrigendum: Three-dimensional bioprinting collagen/silk fibroin scaffold combined with neural stem cells promotes nerve regeneration after spinal cord injury

DOI: https://doi.org/10.4103/1673-5374.280332

2020-01-01

Neural Regeneration Research

Abstract:[This corrects the article DOI: 10.4103/1673-5374.268974].

neurosciences,cell biology

What problem does this paper attempt to address?

Corrigendum: Dissecting the Dual Role of the Glial Scar and Scar-Forming Astrocytes in Spinal Cord Injury

Tuo Yang,YuJuan Dai,Gang Chen,ShuSen Cui

DOI: https://doi.org/10.3389/fncel.2020.00270

2020-10-06

Frontiers in Cellular Neuroscience

Abstract:[This corrects the article DOI: 10.3389/fncel.2020.00078.].

neurosciences
Corrigendum: Editorial: Recent innovations to inhibit scar formation for better skin regeneration.

Xiao-Ying Lin,Tao Zan,Xiao-Li Wu,Guang-Shuai Li,Wei-Qiang Tan

DOI: https://doi.org/10.3389/fsurg.2024.1351577

IF: 1.8

2024-01-01

Frontiers in Surgery

Abstract:[This corrects the article DOI: 10.3389/fsurg.2023.1325832.].
Corrigendum: 3D-Printed Poly-Caprolactone Scaffolds Modified With Biomimetic Extracellular Matrices for Tarsal Plate Tissue Engineering

Liangbo Chen,Dan Yan,Nianxuan Wu,Weijie Zhang,Chenxi Yan,Qinke Yao,Christos C. Zouboulis,Hao Sun,Yao Fu

DOI: https://doi.org/10.3389/fbioe.2020.00548

IF: 5.7

2020-06-03

Frontiers in Bioengineering and Biotechnology

Abstract:[This corrects the article DOI: 10.3389/fbioe.2020.00219.].

multidisciplinary sciences
3D Bioprinted Conductive Spinal Cord Biomimetic Scaffolds for Promoting Neuronal Differentiation of Neural Stem Cells and Repairing of Spinal Cord Injury

Chen Gao,Yuxuan Li,Xiaoyun Liu,Jie Huang,Zhijun Zhang

DOI: https://doi.org/10.1016/j.cej.2022.138788

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:Spinal cord injury (SCI) is a terrible injury of the central nervous system for which there is no ideal treatment in clinic so far. The spinal cord biomimetic scaffolds which mimic the shape and structure of native spinal cord tissue, could effectively promote the repair of SCI. However, current biomimetic scaffolds do not mimic the biological functions, especially the electrical conductivity, of spinal cord tissue, which largely limits the therapeutic effect of SCI. In this study, we have developed novel conductive hydrogels based on gelatin methacrylate (GelMA), hyaluronic acid methacrylate (HAMA) and poly(3,4-ethylenedioxythiophene): sulfonated lignin (PEDOT:LS). The incorporation of PEDOT:LS into GelMA/HAMA hydrogel matrix significantly improved the conductivity of the hydrogels. By precisely regulating the light curing time, the conductive hydrogels showed mechanical properties similar to native spinal cord tissues. Then, the conductive biomimetic scaffolds were fabricated by 3D bioprinting, and the neural stem cells (NSCs) encapsulated in the scaffolds exhibited good survival rate (higher than 90%). Compared to the non-conductive scaffolds reported, the conductive scaffolds remarkably promoted neuronal differentiation of NSCs in vitro. In a rat spinal cord complete transection model, the conductive biomimetic scaffold dramatically promoted the recovery of hindlimb motor function. Immunofluorescence staining results further showed that the conductive biomimetic scaffold effectively promoted the regeneration of neurons at the injury site, reduced the deposition of glial scar, and promoted nerve axon regeneration and myelination. Overall, the 3D bioprinting of the conductive spinal cord biomimetic scaffolds developed in this work represents a promising approach for the stem cell-based treatment of SCI.
Corrigendum: Enhanced angiogenesis in porous poly(ε-caprolactone) scaffolds fortified with methacrylated hyaluronic acid hydrogel after subcutaneous transplantation

DOI: https://doi.org/10.12336/biomatertransl.2024.02.011

2024-06-28

Abstract:[This corrects the article DOI: 10.12336/biomatertransl.2024.01.006.].
Corrigendum to “Evaluation of Novel Stereotactic Cannula for Stem Cell Transplantation against Central Nervous System Disease”

Masahito Kawabori,Aki Tanimori,Shinri Kitta,Hideo Shichinohe,Kiyohiro Houkin

DOI: https://doi.org/10.1155/2021/9796010

2021-04-29

Stem Cells International

Abstract:[This corrects the article DOI: 10.1155/2020/4085617.].

cell & tissue engineering
Dissecting The Dual Role Of The Glial Scar And Scar-Forming Astrocytes In Spinal Cord Injury (Vol 14, 78, 2020)

Tuo Yang,Yujuan Dai,Gang Chen,Shusen Cui

DOI: https://doi.org/10.3389/fncel.2020.00078

2020-01-01

Frontiers in Cellular Neuroscience

Abstract:[This corrects the article DOI: 10.3389/fncel.2020.00078.].
Three-dimensional bioprinting collagen/silk fibroin scaffold combined with neural stem cells promotes nerve regeneration after spinal cord injury

Ji-Peng Jiang,Xiao-Yin Liu,Fei Zhao,Xiang Zhu,Xiao-Yin Li,Xue-Gang Niu,Zi-Tong Yao,Chen Dai,Hui-You Xu,Ke Ma,Xu-Yi Chen,Sai Zhang

DOI: https://doi.org/10.4103/1673-5374.268974

2020-01-01

Neural Regeneration Research

Abstract:Ji-Peng Jiang, Xiao-Yin Liu, Fei Zhao, Xiang Zhu, Xiao-Yin Li, Xue-Gang Niu, Zi-Tong Yao, Chen Dai, Hui-You Xu, Ke Ma, Xu-Yi Chen, Sai Zhang Neural Regeneration Research 2020 15(5):959-968 Many studies have shown that bio-scaffolds have important value for promoting axonal regeneration of injured spinal cord. Indeed, cell transplantation and bio-scaffold implantation are considered to be effective methods for neural regeneration. This study was designed to fabricate a type of three-dimensional collagen/silk fibroin scaffold (3D-CF) with cavities that simulate the anatomy of normal spinal cord. This scaffold allows cell growth in vitro and in vivo. To observe the effects of combined transplantation of neural stem cells (NSCs) and 3D-CF on the repair of spinal cord injury. Forty Sprague-Dawley rats were divided into four groups: sham (only laminectomy was performed), spinal cord injury (transection injury of T10 spinal cord without any transplantation), 3D-CF (3D scaffold was transplanted into the local injured cavity), and 3D-CF + NSCs (3D scaffold co-cultured with NSCs was transplanted into the local injured cavity. Neuroelectrophysiology, imaging, hematoxylin-eosin staining, argentaffin staining, immunofluorescence staining, and western blot assay were performed. Apart from the sham group, neurological scores were significantly higher in the 3D-CF + NSCs group compared with other groups. Moreover, latency of the 3D-CF + NSCs group was significantly reduced, while the amplitude was significantly increased in motor evoked potential tests. The results of magnetic resonance imaging and diffusion tensor imaging showed that both spinal cord continuity and the filling of injury cavity were the best in the 3D-CF + NSCs group. Moreover, regenerative axons were abundant and glial scarring was reduced in the 3D-CF + NSCs group compared with other groups. These results confirm that implantation of 3D-CF combined with NSCs can promote the repair of injured spinal cord. This study was approved by the Institutional Animal Care and Use Committee of People’s Armed Police Force Medical Center in 2017 (approval No. 2017-0007.2).

neurosciences,cell biology
Correction: Development of scaffold-free tissue-engineered constructs derived from mesenchymal stem cells with serum-free media for cartilage repair and long-term preservation

Satoshi Maeda,Masaya Matsumoto,Kotaro Segawa,Kaori Iwamoto,Norimasa Nakamura

DOI: https://doi.org/10.1007/s10616-024-00644-z

IF: 2.2

Cytotechnology

Abstract:[This corrects the article DOI: 10.1007/s10616-024-00637-y.].
Author Correction: 3D Printing of High-Strength Bioscaffolds for the Synergistic Treatment of Bone Cancer

Hongshi Ma,Tao Li,Zhiguang Huan,Meng Zhang,Zezheng Yang,Jinwu Wang,Jiang Chang,Chengtie Wu

DOI: https://doi.org/10.1038/s41427-019-0111-4

IF: 10.761

2019-01-01

NPG Asia Materials

Abstract:After online publication of this article, the authors noticed an error of Fig. 3h in Fig. 3. The correct Fig. 3 of this article should have read as below.
Corrigendum to “Application of 3D Printing-Assisted Articulating Spacer in Two-Stage Revision Surgery for Periprosthetic Infection after Total Knee Arthroplasty: A Retrospective Observational Study”

Lingtong Kong,Jiawei Mei,Wufei Ge,Xiansheng Jin,Xiaoxuan Chen,Xianzuo Zhang,Chen Zhu

DOI: https://doi.org/10.1155/2021/9792626

2021-05-31

BioMed Research International

Abstract:[This corrects the article DOI: 10.1155/2021/3948638.].

biotechnology & applied microbiology,medicine, research & experimental
Three-dimensional bioprinting sodium alginate/gelatin scaffold combined with neural stem cells and oligodendrocytes markedly promoting nerve regeneration after spinal cord injury

Shuo Liu,Hui Yang,Dong Chen,Yuanyuan Xie,ChenXu Tai,Liudi Wang,Peng Wang,Bin Wang

DOI: https://doi.org/10.1093/rb/rbac038

2022-01-01

Regenerative Biomaterials

Abstract:Abstract Accumulating research has indicated that the transplantation of combined stem cells and scaffolds is an effective method for spinal cord injury (SCI). The development of three-dimensional (3D) bioprinting technology can make the 3D scaffolds combined with cells more accurate and effective for SCI treatment. However, unmyelinated newborn nerve fibers have no nerve signaling conduction, hampering recovery of motor function. In this study, we designed and printed a type of sodium alginate/gelatin scaffold loaded with neural stem cells and oligodendrocytes, which were involved in the formation of the myelin sheaths of neural cell axons. In order to observe the effectiveness of this 3D bioprinting scaffold, we transplanted it into the completely transected rat spinal cord, and then immunofluorescence staining, hematoxylin–eosin staining and behavioral assessment were performed. The results showed that this 3D bioprinting scaffold markedly improved the hindlimb motor function and promoted nerve regeneration. These findings suggested that this novel 3D bioprinting scaffold was a good carrier for cells transplantation, thereby enhancing spinal cord repair following injury.

materials science, biomaterials
Therapeutic Effect of Biomimetic Scaffold Loaded with Human Amniotic Epithelial Cell-Derived Neural-like Cells for Spinal Cord Injury.

Chen Qiu,Yuan Sun,Jinying Li,Yuchen Xu,Jiayi Zhou,Cong Qiu,Shaomin Zhang,Yong He,Luyang Yu

DOI: https://doi.org/10.3390/bioengineering9100535

IF: 5.046

2022-01-01

Bioengineering

Abstract:Spinal cord injury (SCI) results in devastating consequences for the motor and sensory function of patients due to neuronal loss and disrupted neural circuits, confronting poor prognosis and lack of effective therapies. A new therapeutic strategy is urgently required. Here, human amniotic epithelial cells (hAEC), featured with immunocompatibility, non-tumorgenicity and no ethical issues, were induced into neural-like cells by a compound cocktail, as evidenced with morphological change and the expression of neural cell markers. Interestingly, the hAEC-neural-like cells maintain the characteristic of low immunogenicity as hAEC. Aiming at SCI treatment in vivo, we constructed a 3D-printed GelMA hydrogel biomimetic spinal cord scaffold with micro-channels, in which hAEC-neural-like cells were well-induced and grown. In a rat full transection SCI model, hAEC-neural-like cell scaffolds that were implanted in the lesion demonstrated significant therapeutic effects; the neural circuit and hindlimb locomotion were partly recovered compared to little affection in the SCI rats receiving an empty scaffold or a sham implantation operation. Thus, the establishment of hAEC-neural-like cell biomimetic scaffolds may provide a safe and effective treatment strategy for SCI.
Correction to: Implantable brain–computer interface for neuroprosthetic-enabled volitional hand grasp restoration in spinal cord injury

DOI: https://doi.org/10.1093/braincomms/fcac143

2022-05-02

Brain Communications

Abstract:[This corrects the article DOI: 10.1093/braincomms/fcab248.].
Correction: Paracrine Factors of Mesenchymal Stem Cells Recruit Macrophages and Endothelial Lineage Cells and Enhance Wound Healing

Liwen Chen,Edward E. Tredget,Philip Yuguang Wu,Yaojiong Wu

DOI: https://doi.org/10.1371/journal.pone.0302417

IF: 3.7

2024-01-01

PLoS ONE

Abstract:[This corrects the article DOI: 10.1371/journal.pone.0001886.].
Corrigendum to ’Decellularized disc hydrogels for hBMSC tissue-specific differentiation and tissue regeneration’ [Bioactive Materials 6 (2021) 3541–3556]

Yizhong Peng,Xiangcheng Qing,Hui Lin,Donghua Huang,Jinye Li,Shuo Tian,Sheng Liu,Xiao Lv,Kaige Ma,Rui Li,Zilong Rao,Ying Bai,Songfeng Chen,Ming Lei,Daping Quan,Zengwu Shao

DOI: https://doi.org/10.1016/j.bioactmat.2021.08.001

IF: 18.9

2022-02-01

Bioactive Materials

Abstract:[This corrects the article DOI: 10.1016/j.bioactmat.2021.03.014.].

engineering, biomedical,materials science, biomaterials
Corrigendum to “Biologically modified implantation as therapeutic bioabsorbable materials for bone defect repair” [Regen Ther 19 (2022) 9–23]

Chao Li,Hongzhi Lv,Yawei Du,Wenbo Zhu,Weijie Yang,Xiumei Wang,Juan Wang,Wei Chen

DOI: https://doi.org/10.1016/j.reth.2023.01.010

IF: 3.651

2023-03-01

Regenerative Therapy

Abstract:[This corrects the article DOI: 10.1016/j.reth.2021.12.004.].

engineering, biomedical,cell & tissue engineering
Erratum: Simvastatin/hydrogel-loaded 3D-printed titanium alloy scaffolds suppress osteosarcoma via TF/NOX2-associated ferroptosis while repairing bone defects.

Zehao Jing,Wanqiong Yuan,Jiedong Wang,Renhua Ni,Yu Qin,Zhinan Mao,Feng Wei,Chunli Song,Yufeng Zheng,Hong Cai,Zhongjun Liu

DOI: https://doi.org/10.1016/j.bioactmat.2024.01.002

IF: 18.9

2024-01-01

Bioactive Materials

Abstract:[This corrects the article DOI: 10.1016/j.bioactmat.2023.11.001.].
Retracted: Recent Advances in Cell and Functional Biomaterial Treatment for Spinal Cord Injury

BioMed Research International

DOI: https://doi.org/10.1155/2024/9760680

2024-01-09

BioMed Research International

Abstract:[This retracts the article DOI: 10.1155/2022/5079153.].

biotechnology & applied microbiology,medicine, research & experimental
The spatial arrangement of cells in a 3D-printed biomimetic spinal cord promotes directional differentiation and repairs the motor function after spinal cord injury

Jianhao Wang,Xiaohong Kong,Qian Li,Chao Li,Hao Yu,Guangzhi Ning,Ziqian Xiang,Yang Liu,Shiqing Feng

DOI: https://doi.org/10.1088/1758-5090/ac0c5f

2021-08-31

Biofabrication

Abstract:Spinal cord injury is a permanent destructive disease that causes devastating neurologic deficits and disability. Long-term complications are associated with low prognosis, mortality, and decreased quality of life. The functional recovery depends on the regeneration of neurons and the growth of medullated axons. Single treatment strategies, including cell transplantation, cannot adapt to a changeable microenvironment. Patients with spinal cord injuries need more effective, long-term, and stable treatment options. Therefore, we investigated the benefit of a combined-tissue engineering strategy by loading homologous bone mesenchymal stem cells (BMSCs) and Schwann cells in three-dimensional (3D) scaffolds. We placed BMSCs and Rat Schwann cells (RSCs) in specific spatial arrangements using cell gravity and the diffusion effect to promote the formation of intercellular connections and cell-directed differentiation. This novel bioengineering system allowed us to control multiple factors, including cell types, cell relative position, and axon growth direction in the scaffold. Our system facilitated motor function recovery by enhancing tissue mimicry and allowing the reconstruction of medullated axons. This new 3D-integrated printing platform is multi-function and can simulate biomimetic tissue using different types of materials and multi-cells scaffolds. We believe that this study can help promote the clinical development and application of 3D printing in the field of regenerative medicine.

Corrigendum: Three-dimensional bioprinting collagen/silk fibroin scaffold combined with neural stem cells promotes nerve regeneration after spinal cord injury

Corrigendum: Dissecting the Dual Role of the Glial Scar and Scar-Forming Astrocytes in Spinal Cord Injury

Corrigendum: Editorial: Recent innovations to inhibit scar formation for better skin regeneration.

Corrigendum: 3D-Printed Poly-Caprolactone Scaffolds Modified With Biomimetic Extracellular Matrices for Tarsal Plate Tissue Engineering

3D Bioprinted Conductive Spinal Cord Biomimetic Scaffolds for Promoting Neuronal Differentiation of Neural Stem Cells and Repairing of Spinal Cord Injury

Corrigendum: Enhanced angiogenesis in porous poly(ε-caprolactone) scaffolds fortified with methacrylated hyaluronic acid hydrogel after subcutaneous transplantation

Corrigendum to “Evaluation of Novel Stereotactic Cannula for Stem Cell Transplantation against Central Nervous System Disease”

Dissecting The Dual Role Of The Glial Scar And Scar-Forming Astrocytes In Spinal Cord Injury (Vol 14, 78, 2020)

Three-dimensional bioprinting collagen/silk fibroin scaffold combined with neural stem cells promotes nerve regeneration after spinal cord injury

Correction: Development of scaffold-free tissue-engineered constructs derived from mesenchymal stem cells with serum-free media for cartilage repair and long-term preservation

Author Correction: 3D Printing of High-Strength Bioscaffolds for the Synergistic Treatment of Bone Cancer

Corrigendum to “Application of 3D Printing-Assisted Articulating Spacer in Two-Stage Revision Surgery for Periprosthetic Infection after Total Knee Arthroplasty: A Retrospective Observational Study”

Three-dimensional bioprinting sodium alginate/gelatin scaffold combined with neural stem cells and oligodendrocytes markedly promoting nerve regeneration after spinal cord injury

Therapeutic Effect of Biomimetic Scaffold Loaded with Human Amniotic Epithelial Cell-Derived Neural-like Cells for Spinal Cord Injury.

Correction to: Implantable brain–computer interface for neuroprosthetic-enabled volitional hand grasp restoration in spinal cord injury

Correction: Paracrine Factors of Mesenchymal Stem Cells Recruit Macrophages and Endothelial Lineage Cells and Enhance Wound Healing

Corrigendum to ’Decellularized disc hydrogels for hBMSC tissue-specific differentiation and tissue regeneration’ [Bioactive Materials 6 (2021) 3541–3556]

Corrigendum to “Biologically modified implantation as therapeutic bioabsorbable materials for bone defect repair” [Regen Ther 19 (2022) 9–23]

Erratum: Simvastatin/hydrogel-loaded 3D-printed titanium alloy scaffolds suppress osteosarcoma via TF/NOX2-associated ferroptosis while repairing bone defects.

Retracted: Recent Advances in Cell and Functional Biomaterial Treatment for Spinal Cord Injury

The spatial arrangement of cells in a 3D-printed biomimetic spinal cord promotes directional differentiation and repairs the motor function after spinal cord injury