Abstract:Reuse of recycled plastic in the construction industry is a novel approach instead of landfilling. However, the utilization of recycled plastic aggregates (RPA) aggravated the majority of concrete properties. In previous investigations, different techniques such as surface treatment of RPAs were utilized to reduce the negative influence of the RPAs on the concrete performance. Research regarding the improvement of RPA self-compacting concrete (SCC) properties by the addition of nano-silica particles (NS) is scarce. Therefore, the current study aims to experimentally investigate the properties of the SCC-incorporated RPAs modified with NS. The experimental program contained sixteen different mixtures which were subdivided into three stages. In the first stage, the effect of NS addition on the performance of SCC mixtures was evaluated. Moreover, the effect of different percentages of RPAs was investigated in the second phase. In the third stage, the optimum percentage of NS particles found in the first stage was utilized to improve the performance of SCC mixtures which aggravated in the second stage. The total binder content for all mixtures was 500 kg/m 3 which contained 70 % of cement, 20 % of ground granulated blast furnace slag (GGBFS) and 10 % silica fume. In the first stage the cement was replaced by 1 %, 2 %, and 3 % NS particles, while, in the second stage, the natural fine aggregate (NFA) was replaced by RPAs at six volume fractions (5 %, 10 %, 15 %, 20 %, 30 %, and 40 %). The fresh behaviour of all SCC mixtures was investigated to assess the flowability, filling ability, passing ability, and cohesiveness of the mixtures. The mechanical behaviour was evaluated for compressive strength, splitting tensile strength, modulus of elasticity, flexural strength, and stress–strain behaviour. Moreover, the microstructure characteristics were investigated to illustrate the modifications that occurred in the microstructure scale. The results indicated that the addition of an optimum percentage of NS particles can significantly restore most properties of RPASCC which were degraded due to the addition of RPAs. This technique can help the construction industry to safely use the RPAs in the SCC mixtures without concern about their negative impact on concrete performance.

Effect of the source concrete with ASR degradation on the mechanical and physical properties of coarse recycled aggregate

Steel Corrosion and Corrosion-Induced Cracking in Reinforced Concrete with Carbonated Recycled Aggregate

A Review on Alkali-Silica Reaction Evolution in Recycled Aggregate Concrete

Mechanical Properties of ASR-Affected Concrete Containing Fine or Coarse Reactive Aggregates

Effect of Recycled Fine Aggregates on the Mechanical and Drying Shrinkage Properties of Alkali-Activated Recycled Concrete

Residual alkali–silica reaction of coarse recycled concrete aggregate based on the application of a prescriptive measure from the Argentinian regulation

Internal alkali transport in recycling concrete and its impact on alkali-silica reaction

Assessment of effects of ASR-induced cracking on direct shear strength of recycled concrete

Long-term effect of recycled aggregate on microstructure, mechanical properties, and CO2 sequestration of rendering mortars

Microstructure characteristics, stress–strain behaviour, fresh properties, and mechanical performance of recycled plastic aggregate self-compacting concrete modified with nano-silica

The Effect of Alkali-Silica Reaction (Asr) on the Mechanical Properties of Concretes Containing Trass

Mechanical properties of ASR affected concrete: a critical review

Effect of reactive coarse recycled aggregate with different expansion history on alkali silica reactivity and mechanical properties of new concrete

A study into the alkali-silica reactivity of recycled concrete aggregates and the role of the extent of damage in the source structures: Evaluation, accelerated testing, and preventive measures

Mechanical performance of concrete made with aggregates from construction and demolition waste recycling plants

Influence of different treatment methods on the mechanical behavior of recycled aggregate concrete: A comparative study

Effect of microfibers or SRA on the shrinkage and mechanical properties of alkali activated slag/fly ash-based mortars incorporating recycled fine aggregate

Experimental evaluation of mechanical properties and microstructure for recycled aggregate concrete collaboratively modified with nano-silica and mixed fibers

The Effect of Reclaimed Asphalt Pavement (RAP) Aggregates on the Reaction, Mechanical Properties and Microstructure of Alkali-Activated Slag

Experimental and Statistical Evaluation of the Interaction Effect of Recycled Aggregate and Water/Cement Ratio on Concrete Compressive Strength

Creep and Shrinkage Properties of Nano-SiO2-Modified Recycled Aggregate Concrete