Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

Comparison between chemical and natural treatments for bamboo as building material towards sustainable construction method

Role of Alkali Treatment on Mechanical and Thermal Properties of Bamboo Particles Reinforced Polyvinylchloride Composites

Production, Environmental Impact and Mechanical Properties of Glubam

Life cycle of bamboo frame construction in purple bamboo park

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

THE STATE OF THE ART OF MODERN BAMBOO STRUCTURES

Bamboo's evolution as a sustainable material: a comprehensive exploration and practical integration as a structural element in concrete, bridge frameworks, and architectural perspectives

Bamboo as a Building Material

Influence of Chemical Treatment on the Physical and Mechanical Properties of Bamboo Fibers as Potential Reinforcement for Polymer Composites

Sustainable Material: Development Experiment of Bamboo Composite Through Biologically Binding Mechanism

The physical, mechanical and fire performance of bamboo scrimber processed with thermal-treated bamboo bundles

Influence of chemical treatment of bamboo fibers on the vibration and acoustic characterization of carbon/bamboo fiber reinforced hybrid composites

The Physical and Mechanical Properties of Bamboo Fibres Filled with Calcium Carbonate Powder Reinforced Epoxy Composites in Coating Treatment Process for Roofing Application

BAMBOO COMPOSITE BEAMS TO SUBSTITUTE LUMBER FRAMING IN RESIDENTIAL CONSTRUCTION

Durability Evaluation of Outdoor Scrimbers Fabricated from Superheated Steam-Treated Bamboo Fibrous Mats

Changes in chemical components of steam-treated betung bamboo strands and their effects on the physical and mechanical properties of bamboo-oriented strand boards

Augmenting bamboo strength and thermal stability for sustainable construction

Bamboo Utilization as a Sustainable Building Material

Advancements in bamboo preservative solutions for sustainable construction in Brazil

Examining the Practice of Using Bamboo for Construction, Indoor and Outdoor Decoration

Experimental Analysis on the Feasibility of Bamboo Reinforcement in Concrete Mix Design and Comparison with Steel Reinforced Concrete